Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] F. Caspers, E. Jensen, and F. Ruggiero, “Impedance Measurements for the Pumping Holes in the LHC Liner”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 889-892.
[n] Z. Y. Guo, Y. D. Liu, Q. Qin, J. Q. Wang, and J. Xing, “The Studies of Electron Cloud Instability”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper MOA201, pp. XX-XX.
[n] M. Diop et al., “Status of the SOLEIL Superconducting RF System”, in Proc. SRF'17, Lanzhou, China, Jul. 2017, pp. 141-143. doi:10.18429/JACoW-SRF2017-MOPB041
[n] Y. Ishi et al., “Present Status and Future of FFAGs at KURRI and the First ADSR Experiment”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUOCRA03, pp. 1327-1329.
[n] A. Potylitsyn, G. Kube, A. I. Novokshonov, and L. G. Sukhikh, “Spatial Resolution Improvement of OTR Monitors by Off-axis Light Collection”, in Proc. IBIC'18, Shanghai, China, Sep. 2018, pp. 451-454. doi:10.18429/JACoW-IBIC2018-WEPB11
[n] A. Jimeno Yepes and B. Rousseau, “Towards an Ontology Based Search Mechanism for the EDMS at CERN”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPLT021, pp. 1870-1872.
[n] E. Syresin, “Acceleration Technique Developed at JINR for Hadron Therapy”, in Proc. RuPAC'12, Saint Petersburg, Russia, Sep. 2012, paper FRACH04, pp. 194-196.
[n] R. D?Âlling et al., “Beam Diagnostics at High Power Proton Beam Lines and Targets at PSI”, in Proc. DIPAC'05, Lyon, France, Jun. 2005, paper ITTA02, pp. 228-232.
[n] N. Steinhau-Kuehl, R. Bandelmann, A. Matheisen, S. Saegebarth, M. Schmoekel, and A. Arnold, “Vertical Electro Polishing of Superconducting Single-and Multi Cell Gun Resonators”, in Proc. SRF'17, Lanzhou, China, Jul. 2017, pp. 571-574. doi:10.18429/JACoW-SRF2017-TUPB075
[n] Y. Matsubara et al., “Development on Superconducting Cavities at SHI”, in Proc. SRF'97, Padova, Italy, Oct. 1997, paper SRF97A27, pp. 248-253.
[n] B. Angerth et al., “The LHC Beam Screen - Specification and Design”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 208-211.
[n] K. Kamakura et al., “Design of a Sector Magnet for High Temperature Superconducting Injector Cyclotron”, in Proc. HIAT'15, Yokohama, Japan, Sep. 2015, paper MOA2C01, pp. 27-29.
[n] T. Miyajima et al., “Present Status of Photon Factory Advanced Ring”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper MPPB015, pp. 860-862.
[n] H. Baba, S. Inagaki, M. Kobayashi, S. Okumura, and J. Tanaka, “Pulsed Drift Tube Quadrupole Magnets with High Precision”, in Proc. LINAC'72, Los Alamos, NM, USA, Oct. 1972, paper H04, pp. 205-208.
[n] I. I. Isaev et al., “RF Photo Gun Stability Measurement at PITZ”, in Proc. FEL'11, Shanghai, China, Aug. 2011, paper THPA10, pp. 485-488.
[n] T. Ieiri, J. W. Flanagan, H. Fukuma, Y. Ohnishi, and M. Tobiyama, “Measurement of Wakefield Effects caused by Electron Cloud at KEKB”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPD008, pp. 1934-1936.
[n] M. Comunian, E. Fagotti, A. Pisent, and P. A. Posocco, “Beam Dynamics of the IFMIF-EVEDA RFQ”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPP075, pp. 3536-3538.
[n] T. Shidara, T. Kurihara, A. Shirakawa, A. Enomoto, H. Kobayashi, and K. Nakahara, “Relocation of the KEK Slow-Positron Facility”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 4D049, pp. 199-201.
[n] M. Kitaguchi et al., “Accelerator/Decelerator of Slow Neutrons”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper MO3A04, pp. 133-137.
[n] L. Froehlich, “Machine Protection for Single-Pass FELs”, in Proc. FEL'12, Nara, Japan, Aug. 2012, paper WEOA03, pp. 345-348.
[n] A. Goto et al., “Isochronous Fields for RIKEN Ring Cyclotron”, in Proc. Cyclotrons'86, Tokyo, Japan, Oct. 1986, paper I1-03, pp. 292-295.
[n] G. Gatti et al., “Metal Film Photocathodes for High Brightness Electron Injectors”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper MOPCH027, pp. 104-106.
[n] A. Dobrosavljevic et al., “Commissioning of the mVINIS Ion Source”, in Proc. Cyclotrons'98, Caen, France, Jun. 1998, paper F-14, pp. 443-446.
[n] R. Calaga et al., “Beam Losses Due to Abrupt Crab Cavity Failures in the LHC”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOODN4, pp. 76-78.
[n] Yu. Maltseva et al., “VEPP-5 Injection Complex: New Possibilities for BINP Electron-Positron Colliders”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 371-373. doi:10.18429/JACoW-IPAC2018-MOPMK011
[n] W. X. Cheng, B. Bacha, Y. Li, and D. Teytelman, “Developments of Bunch by Bunch Feedback System at NSLS-II Storage Ring”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1833-1836. doi:10.18429/JACoW-IPAC2018-WEPAF011
[n] X. Wei, G. Andonian, J. B. Rosenzweig, and D. Stratakis, “Standing Wakefield Accelerator Based on Periodic Dielectric Structures”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOP011, pp. 124-126.
[n] T. N. Khabiboulline et al., “Mechanical Optimization of High Beta 650 MHz Cavity for Pulse and CW Operation of PIP-II Project”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper THPB014, pp. 1093-1096.
[n] L. Froehlich, S. Grulja, and F. Loehl, “DOSFET-L02: An Advanced Online Dosimetry System for RADFET Sensors”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper TUPC45, pp. 481-484.
[n] M. Kondo et al., “The Osaka University RCNP 230-cm Isochronous Cyclotron”, in Proc. Cyclotrons'75, Zurich, Switzerland, Aug. 1975, paper A-14, pp. 95-98.
[n] J. Lee and J. R. Cary, “Cooling of Non-Neutral Plasma by Energy Exchange”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper FPAH091, pp. 3891-3893.
For LaTeX
Use Complete Form
For BibTeX
References
- F. Caspers, E. Jensen, and F. Ruggiero, “Impedance Measurements for the Pumping Holes in the LHC Liner”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 889-892.
- Z. Y. Guo, Y. D. Liu, Q. Qin, J. Q. Wang, and J. Xing, “The Studies of Electron Cloud Instability”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper MOA201, pp. XX-XX.
- M. Diop et al., “Status of the SOLEIL Superconducting RF System”, in Proc. 18th Int. Conf. RF Superconductivity (SRF'17), Lanzhou, China, Jul. 2017, pp. 141-143.
- Y. Ishi et al., “Present Status and Future of FFAGs at KURRI and the First ADSR Experiment”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUOCRA03, pp. 1327-1329.
- A. Potylitsyn, G. Kube, A. I. Novokshonov, and L. G. Sukhikh, “Spatial Resolution Improvement of OTR Monitors by Off-axis Light Collection”, in Proc. 7th Int. Beam Instrumentation Conf. (IBIC'18), Shanghai, China, Sep. 2018, pp. 451-454.
- A. Jimeno Yepes and B. Rousseau, “Towards an Ontology Based Search Mechanism for the EDMS at CERN”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper WEPLT021, pp. 1870-1872.
- E. Syresin, “Acceleration Technique Developed at JINR for Hadron Therapy”, in Proc. 23rd Russian Particle Accelerator Conf. (RuPAC'12), Saint Petersburg, Russia, Sep. 2012, paper FRACH04, pp. 194-196.
- R. D?Âlling et al., “Beam Diagnostics at High Power Proton Beam Lines and Targets at PSI”, in Proc. 7th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'05), Lyon, France, Jun. 2005, paper ITTA02, pp. 228-232.
- N. Steinhau-Kuehl, R. Bandelmann, A. Matheisen, S. Saegebarth, M. Schmoekel, and A. Arnold, “Vertical Electro Polishing of Superconducting Single-and Multi Cell Gun Resonators”, in Proc. 18th Int. Conf. RF Superconductivity (SRF'17), Lanzhou, China, Jul. 2017, pp. 571-574.
- Y. Matsubara et al., “Development on Superconducting Cavities at SHI”, in Proc. 8th Int. Conf. RF Superconductivity (SRF'97), Padova, Italy, Oct. 1997, paper SRF97A27, pp. 248-253.
- B. Angerth et al., “The LHC Beam Screen - Specification and Design”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 208-211.
- K. Kamakura et al., “Design of a Sector Magnet for High Temperature Superconducting Injector Cyclotron”, in Proc. 13th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'15), Yokohama, Japan, Sep. 2015, paper MOA2C01, pp. 27-29.
- T. Miyajima et al., “Present Status of Photon Factory Advanced Ring”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper MPPB015, pp. 860-862.
- H. Baba, S. Inagaki, M. Kobayashi, S. Okumura, and J. Tanaka, “Pulsed Drift Tube Quadrupole Magnets with High Precision”, in Proc. 1972 Proton Linear Accelerator Conf. (LINAC'72), Los Alamos, NM, USA, Oct. 1972, paper H04, pp. 205-208.
- I. I. Isaev et al., “RF Photo Gun Stability Measurement at PITZ”, in Proc. 33rd Int. Free Electron Laser Conf. (FEL'11), Shanghai, China, Aug. 2011, paper THPA10, pp. 485-488.
- T. Ieiri, J. W. Flanagan, H. Fukuma, Y. Ohnishi, and M. Tobiyama, “Measurement of Wakefield Effects caused by Electron Cloud at KEKB”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPD008, pp. 1934-1936.
- M. Comunian, E. Fagotti, A. Pisent, and P. A. Posocco, “Beam Dynamics of the IFMIF-EVEDA RFQ”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THPP075, pp. 3536-3538.
- T. Shidara, T. Kurihara, A. Shirakawa, A. Enomoto, H. Kobayashi, and K. Nakahara, “Relocation of the KEK Slow-Positron Facility”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 4D049, pp. 199-201.
- M. Kitaguchi et al., “Accelerator/Decelerator of Slow Neutrons”, in Proc. 26th Linear Accelerator Conf. (LINAC'12), Tel Aviv, Israel, Sep. 2012, paper MO3A04, pp. 133-137.
- L. Froehlich, “Machine Protection for Single-Pass FELs”, in Proc. 34th Int. Free Electron Laser Conf. (FEL'12), Nara, Japan, Aug. 2012, paper WEOA03, pp. 345-348.
- A. Goto et al., “Isochronous Fields for RIKEN Ring Cyclotron”, in Proc. 11th Int. Cyclotron Conf. and Their Applications (Cyclotrons'86), Tokyo, Japan, Oct. 1986, paper I1-03, pp. 292-295.
- G. Gatti et al., “Metal Film Photocathodes for High Brightness Electron Injectors”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper MOPCH027, pp. 104-106.
- A. Dobrosavljevic et al., “Commissioning of the mVINIS Ion Source”, in Proc. 15th Int. Cyclotron Conf. and Their Applications (Cyclotrons'98), Caen, France, Jun. 1998, paper F-14, pp. 443-446.
- R. Calaga et al., “Beam Losses Due to Abrupt Crab Cavity Failures in the LHC”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper MOODN4, pp. 76-78.
- Yu. Maltseva et al., “VEPP-5 Injection Complex: New Possibilities for BINP Electron-Positron Colliders”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 371-373.
- W. X. Cheng, B. Bacha, Y. Li, and D. Teytelman, “Developments of Bunch by Bunch Feedback System at NSLS-II Storage Ring”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 1833-1836.
- X. Wei, G. Andonian, J. B. Rosenzweig, and D. Stratakis, “Standing Wakefield Accelerator Based on Periodic Dielectric Structures”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper MOP011, pp. 124-126.
- T. N. Khabiboulline et al., “Mechanical Optimization of High Beta 650 MHz Cavity for Pulse and CW Operation of PIP-II Project”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper THPB014, pp. 1093-1096.
- L. Froehlich, S. Grulja, and F. Loehl, “DOSFET-L02: An Advanced Online Dosimetry System for RADFET Sensors”, in Proc. 2nd Int. Beam Instrumentation Conf. (IBIC'13), Oxford, UK, Sep. 2013, paper TUPC45, pp. 481-484.
- M. Kondo et al., “The Osaka University RCNP 230-cm Isochronous Cyclotron”, in Proc. 7th Int. Cyclotron Conf. (Cyclotrons'75), Zurich, Switzerland, Aug. 1975, paper A-14, pp. 95-98.
- J. Lee and J. R. Cary, “Cooling of Non-Neutral Plasma by Energy Exchange”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper FPAH091, pp. 3891-3893.
Back to search