Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] V. V. Kashikhin and A. V. Zlobin, “Single-Layer High Field Dipole Magnets”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPPH081, pp. 3415-3417.
[n] J. Hao et al., “R&D of Niobium-Sputtered Copper QWR for Heavy Ion Linac in Peking University”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 4E206, pp. 304-308.
[n] A. Bocci et al., “Beam Diagnostics with IR Light Emitted by Positron at DAFNE”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPC008, pp. 1056-1058.
[n] B. Cheymol, “Effect of Beam Losses on Wire Scanner Scintillator Readout, Hypothesis and Preliminary Results”, in Proc. HB'16, Malmö, Sweden, Jul. 2016, pp. 216-220. doi:10.18429/JACoW-HB2016-MOPL015
[n] Y. J. Pei, “Recent Status of 200 MeV Electron Linac of HESYRL”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper TH4-04, pp. 612-614.
[n] K. Zhao et al., “The Progress Report on RF Superconductivity at Peking University”, in Proc. SRF'05, Ithaca, NY, USA, Jul. 2005, paper THP34, pp. 538-540.
[n] J. R. Boyce et al., “Linac-Ring Colliders with High Disruption Parameters-A First Test of Principle”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 3264-3267.
[n] S. Belomestnykh and V. Shemelin, “High-?ƒ Cavity Design - A Tutorial”, in Proc. SRF'05, Ithaca, NY, USA, Jul. 2005, paper SUA02, pp. 2-19.
[n] X. Y. Wu, D. Lawton, F. Marti, and A. F. Zeller, “Design of the Injection Channel Magnets for the K1200 Cyclotron”, in Proc. Cyclotrons'01, East Lansing, MI, USA, May 2001, paper P3-25, pp. XX-XX.
[n] J. Wei, W. Fischer, V. Ptitsin, R. Ostojic, and J. Strait, “Interaction Region Local Correction for the Large Hadron Collider”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THA143, pp. 2921-2923.
[n] Z. Y. Guo et al., “Study of the Beam-Photoelectron Instability in BEPC”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 5D020, pp. 432-434.
[n] A. I. Drozhdin, W. Pellico, and X. Yang, “Injection Parameters Optimization for the Fermilab Booster”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPAS041, pp. 1736-1738.
[n] A. I. Drozhdin, D. E. Johnson, and L. G. Vorobiev, “Numerical Studies of High-Intensity Injection Painting for Project X”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU6PFP059, pp. 1418-1420.
[n] V. Andreev et al., “Experimental Results on the Stainless Steel Prototype of a Superconducting RFQ”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP28G, pp. 1840-1842.
[n] Y. Papaphilippou et al., “Operational Improvements in the ESRF Injection Complex”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPKF033, pp. 375-377.
[n] V. Schoefer, L. Ahrens, K. A. Brown, J. Morris, and S. Nemesure, “RHIC Injector Complex Online Model Status and Plans”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR5REP003, pp. 4776-4778.
[n] M. Kranjcevic, A. Adelmann, P. Arbenz, S. Gorgi Zadeh, and U. van Rienen, “Constrained Multi-Objective Shape Optimization of Superconducting RF Cavities to Counteract Dangerous Higher Order Modes”, in Proc. ICAP'18, Key West, Florida, USA, Oct. 2018, pp. 293-296. doi:10.18429/JACoW-ICAP2018-TUPAG14
[n] G. Stancari et al., “Development of hollow electron beams for proton and ion collimation”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPEB076, pp. 1698-1700.
[n] E. Prebys et al., “New Corrector System for the Fermilab Booster”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper MOPAS016, pp. 467-469.
[n] J. P. Dai, H. Li, L. H. Li, Q. Y. Wang, J. Zhang, and P. Sha, “Surface Processing Facilities for Spoke Cavities at IHEP”, in Proc. SRF'13, Paris, France, Sep. 2013, paper TUP044, pp. 508-510.
[n] G. Devanz et al., “Quarter-wave Cavities for the SPIRAL 2 Project”, in Proc. SRF'03, Lübeck, Germany, Sep. 2003, paper TUP06, pp. 290-292.
[n] K. Papke et al., “Mode Sensitivity Analysis of 704.4 MHz Superconducting RF Cavities”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper MOPB078, pp. 311-315.
[n] T. Furukawa et al., “Optical Matching of Slowly Extracted Beam with Transport System at HIMAC”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper FPAE004, pp. 910-912.
[n] Z. Li et al., “Optimization of the Low-Loss SRF Cavity for the ILC”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEPMS042, pp. 2439-2441.
For LaTeX
Use Complete Form
For BibTeX
References
- V. V. Kashikhin and A. V. Zlobin, “Single-Layer High Field Dipole Magnets”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPPH081, pp. 3415-3417.
- J. Hao et al., “R&D of Niobium-Sputtered Copper QWR for Heavy Ion Linac in Peking University”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 4E206, pp. 304-308.
- A. Bocci et al., “Beam Diagnostics with IR Light Emitted by Positron at DAFNE”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper TUPC008, pp. 1056-1058.
- B. Cheymol, “Effect of Beam Losses on Wire Scanner Scintillator Readout, Hypothesis and Preliminary Results”, in Proc. 57th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'16), Malmö, Sweden, Jul. 2016, pp. 216-220.
- Y. J. Pei, “Recent Status of 200 MeV Electron Linac of HESYRL”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper TH4-04, pp. 612-614.
- K. Zhao et al., “The Progress Report on RF Superconductivity at Peking University”, in Proc. 12th Int. Conf. RF Superconductivity (SRF'05), Ithaca, NY, USA, Jul. 2005, paper THP34, pp. 538-540.
- J. R. Boyce et al., “Linac-Ring Colliders with High Disruption Parameters-A First Test of Principle”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 3264-3267.
- S. Belomestnykh and V. Shemelin, “High-?ƒ Cavity Design - A Tutorial”, in Proc. 12th Int. Conf. RF Superconductivity (SRF'05), Ithaca, NY, USA, Jul. 2005, paper SUA02, pp. 2-19.
- X. Y. Wu, D. Lawton, F. Marti, and A. F. Zeller, “Design of the Injection Channel Magnets for the K1200 Cyclotron”, in Proc. 16th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'01), East Lansing, MI, USA, May 2001, paper P3-25, pp. XX-XX.
- J. Wei, W. Fischer, V. Ptitsin, R. Ostojic, and J. Strait, “Interaction Region Local Correction for the Large Hadron Collider”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper THA143, pp. 2921-2923.
- Z. Y. Guo et al., “Study of the Beam-Photoelectron Instability in BEPC”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 5D020, pp. 432-434.
- A. I. Drozhdin, W. Pellico, and X. Yang, “Injection Parameters Optimization for the Fermilab Booster”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUPAS041, pp. 1736-1738.
- A. I. Drozhdin, D. E. Johnson, and L. G. Vorobiev, “Numerical Studies of High-Intensity Injection Painting for Project X”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU6PFP059, pp. 1418-1420.
- V. Andreev et al., “Experimental Results on the Stainless Steel Prototype of a Superconducting RFQ”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper TUP28G, pp. 1840-1842.
- Y. Papaphilippou et al., “Operational Improvements in the ESRF Injection Complex”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper MOPKF033, pp. 375-377.
- V. Schoefer, L. Ahrens, K. A. Brown, J. Morris, and S. Nemesure, “RHIC Injector Complex Online Model Status and Plans”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper FR5REP003, pp. 4776-4778.
- M. Kranjcevic, A. Adelmann, P. Arbenz, S. Gorgi Zadeh, and U. van Rienen, “Constrained Multi-Objective Shape Optimization of Superconducting RF Cavities to Counteract Dangerous Higher Order Modes”, in Proc. 13th International Computational Accelerator Physics Conference (ICAP'18), Key West, Florida, USA, Oct. 2018, pp. 293-296.
- G. Stancari et al., “Development of hollow electron beams for proton and ion collimation”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPEB076, pp. 1698-1700.
- E. Prebys et al., “New Corrector System for the Fermilab Booster”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper MOPAS016, pp. 467-469.
- J. P. Dai, H. Li, L. H. Li, Q. Y. Wang, J. Zhang, and P. Sha, “Surface Processing Facilities for Spoke Cavities at IHEP”, in Proc. 16th Int. Conf. RF Superconductivity (SRF'13), Paris, France, Sep. 2013, paper TUP044, pp. 508-510.
- G. Devanz et al., “Quarter-wave Cavities for the SPIRAL 2 Project”, in Proc. 11th Workshop RF Superconductivity (SRF'03), Lübeck, Germany, Sep. 2003, paper TUP06, pp. 290-292.
- K. Papke et al., “Mode Sensitivity Analysis of 704.4 MHz Superconducting RF Cavities”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper MOPB078, pp. 311-315.
- T. Furukawa et al., “Optical Matching of Slowly Extracted Beam with Transport System at HIMAC”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper FPAE004, pp. 910-912.
- Z. Li et al., “Optimization of the Low-Loss SRF Cavity for the ILC”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper WEPMS042, pp. 2439-2441.
Back to search