Favourites
For Word
[n] M. I. Green, B. Gee, S. Marks, J. Meneghetti, D. Nelson, and W. Wong, “Design, Fabrication, and Calibration of Curved Integral Coils for Measuring Transfer Function, Uniformity and Effective Length of LBL ALS Booster Dipole Magnets”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1972-1975.
[n] E. A. Hughes, T. Ring, and B. Taylor, “A Single Bunch Systrem for the Daresbury SRS”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2633-2636.
[n] J. Plouin, J.-P. Charrier, C. Magne, J. Novo, and L. Maurice, “Experimental Investigations of the Quench Phenomena for the Quench Localization by the Second Sound Wave Method”, in Proc. SRF'13, Paris, France, Sep. 2013, paper TUP111, pp. 739-742.
[n] R. D. Hay and C. G. Masi, “A Variable Strength Permanent Magnet Dipole”, in Proc. LINAC'81, Santa Fe, NM, USA, Oct. 1981, paper B18, pp. 84-86.
[n] G. Stover and K. Fowler, “Operating Results for the Beam Profile Monitor System Currently in Use at Bevalac Facility”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 622-625.
[n] R. Hettel, R. Ortiz, J. Sebek, and J. Wachter, “SSRL Beam Position Monitor Detection Electronics”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper TUP099L, pp. 1737-1739.
[n] A. E. Candel et al., “Wakefield Simulation of CLIC PETS Structure Using Parallel 3D Finite Element Time-Domain Solver T3P”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR5PFP068, pp. 4467-4469.
[n] Ph. Bernard et al., “Superconducting Niobium Sputter-coated Copper Cavities at 1500 MHz”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1269-1272.
[n] G. A. Loew et al., “The SLC Energy Upgrade Program at SLAC”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2748-2751.
[n] R. Ferdinand et al., “SPIRAL 2 RFQ Design”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPLT076, pp. 2026-2028.
[n] R. Bergere and A. Veyssiere, “Study of Some Transversal Motions of the Electron Beam of a Linac”, in Proc. PAC'65, Washington D.C., USA, Mar. 1965, pp. 593-607.
[n] L. H. Yu, “Orbit Stability and Feedback Control in Synchrotron Radiation Rings”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 54-60.
[n] J. Cardona, D. Abell, and S. Peggs, “Studies on Sextupole Components Generated by Eddy Currents in the Rapid Cycling Medical Synchrotron”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper MPPG023, pp. 1059-1061.
[n] A. H. Lumpkin, W. Berg, N. Sereno, and C. Yao, “Initial Imaging of 7-GeV Electron Beams with OTR/ODR Techniques at APS”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPAT085, pp. 4162-4164.
For LaTeX
Use Complete Form
For BibTeX
References
- M. I. Green, B. Gee, S. Marks, J. Meneghetti, D. Nelson, and W. Wong, “Design, Fabrication, and Calibration of Curved Integral Coils for Measuring Transfer Function, Uniformity and Effective Length of LBL ALS Booster Dipole Magnets”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 1972-1975.
- E. A. Hughes, T. Ring, and B. Taylor, “A Single Bunch Systrem for the Daresbury SRS”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2633-2636.
- J. Plouin, J.-P. Charrier, C. Magne, J. Novo, and L. Maurice, “Experimental Investigations of the Quench Phenomena for the Quench Localization by the Second Sound Wave Method”, in Proc. 16th Int. Conf. RF Superconductivity (SRF'13), Paris, France, Sep. 2013, paper TUP111, pp. 739-742.
- R. D. Hay and C. G. Masi, “A Variable Strength Permanent Magnet Dipole”, in Proc. 1981 Linear Accelerator Conf. (LINAC'81), Santa Fe, NM, USA, Oct. 1981, paper B18, pp. 84-86.
- G. Stover and K. Fowler, “Operating Results for the Beam Profile Monitor System Currently in Use at Bevalac Facility”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 622-625.
- R. Hettel, R. Ortiz, J. Sebek, and J. Wachter, “SSRL Beam Position Monitor Detection Electronics”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper TUP099L, pp. 1737-1739.
- A. E. Candel et al., “Wakefield Simulation of CLIC PETS Structure Using Parallel 3D Finite Element Time-Domain Solver T3P”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper FR5PFP068, pp. 4467-4469.
- Ph. Bernard et al., “Superconducting Niobium Sputter-coated Copper Cavities at 1500 MHz”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 1269-1272.
- G. A. Loew et al., “The SLC Energy Upgrade Program at SLAC”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2748-2751.
- R. Ferdinand et al., “SPIRAL 2 RFQ Design”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper WEPLT076, pp. 2026-2028.
- R. Bergere and A. Veyssiere, “Study of Some Transversal Motions of the Electron Beam of a Linac”, in Proc. 1st Particle Accelerator Conf. (PAC'65), Washington D.C., USA, Mar. 1965, pp. 593-607.
- L. H. Yu, “Orbit Stability and Feedback Control in Synchrotron Radiation Rings”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 54-60.
- J. Cardona, D. Abell, and S. Peggs, “Studies on Sextupole Components Generated by Eddy Currents in the Rapid Cycling Medical Synchrotron”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper MPPG023, pp. 1059-1061.
- A. H. Lumpkin, W. Berg, N. Sereno, and C. Yao, “Initial Imaging of 7-GeV Electron Beams with OTR/ODR Techniques at APS”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper RPAT085, pp. 4162-4164.
Back to search