JaCoW Logo

Reference Search

Warning
Please note that we have recently received feedback indicated that atleast one of these reference may have a problem.

Some papers have malformed authors, please correct this before using these references.

Favourites


For Word

[n]	F. Schmidt and A. Verdier, “Optimisation of the LHC Dynamic Aperture via the Phase Advance of the Arc Cells”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUP38, pp. 1563-1565. 
[n]	M. Pojer et al., “LHC Operational Experience of the 6.5 TeV Proton Run with ATS Optics”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 216-219. doi:10.18429/JACoW-IPAC2018-MOPMF050
[n]	G. Liu et al., “Model Calibration of Betatron Functions and Phase in the SPring-8 Storage Ring”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEP32, pp. 2337-2339. 
[n]	J. Corbett, Y. Nosochkov, J. Safranek, and A. Garren, “Dynamic Aperture Studies for SPEAR 3”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEP42, pp. 2364-2366. 
[n]	A. Neumann et al., “Final Acceptance Test of SRF Photo-Injector Cold String for the BERLinPro Energy Recovery Linac”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 445-448. doi:10.18429/JACoW-LINAC2016-TUPRC015
[n]	F. Peauger, “SWELL and Other SRF Split Cavity Development”, in Proc. LINAC'22, Liverpool, UK, Aug.-Sep. 2022, pp. 300-304. doi:10.18429/JACoW-LINAC2022-TU1AA04
[n]	Y. Wei et al., “Beam Dynamics Studies into Grating-based Dielectric Laser-driven Accelerators”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1970-1972. doi:10.18429/JACoW-IPAC2016-TUPOY027
[n]	Q. J. Xu, “High Field Superconducting Magnet Program for Accelerators in China”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 4359-4360. doi:10.18429/JACoW-IPAC2019-FRXXPLM1
[n]	J. Y. Ma, Z. Gao, G. Huang, and L. P. Sun, “Low-level RF System for The Chinese ADS Front-end Demo Linac”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2159-2161. doi:10.18429/JACoW-IPAC2018-WEPAL008
[n]	B. Jean, “Medical and Surgical Applications of FELs”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper FAG03, pp. 75-79. 
[n]	M. Vretenar, “Introduction by the Chair”, presented at the IPAC'23, Venice, Italy, May 2023, paper TUINGB0, unpublished. 
[n]	M. Liepe et al., “Progress on Superconducting RF for the Cornell Energy-Recovery-Linac”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper FROBS3, pp. 2580-2582. 
[n]	A. Neumann et al., “Towards a 100mA Superconducting RF Photoinjector for BERLinPro”, in Proc. SRF'13, Paris, France, Sep. 2013, paper MOIOB02, pp. 42-49. 
[n]	D. Wang, Z. M. Wang, W. Chen, P. F. Ma, Y. G. Yang, and W. Wang, “Design of Beam Profile Monitor Used at the Xi'an Proton Application Facility (XiPAF)”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4892-4894. doi:10.18429/JACoW-IPAC2018-THPML098
[n]	J. Laskar, “Frequency Map Analysis and Particle Accelerators”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WOAB001, pp. 378-382. 
[n]	T. Higo et al., “Fabrication of a Quadrant-type Accelerator Structure for CLIC”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPP084, pp. 2716-2718. 
[n]	S. Slinker, G. Joyce, J. Krall, and M. Lampe, “Beam Dynamics in the Spiral Line Induction Accelerator”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 242-245. 
[n]	J. Feikes and G. Wuestefeld, “Experimental Studies of the Nonlinear Momentum Compaction Factor at BESSY II”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEP47, pp. 2376-2378. 
[n]	V. A. Dolgashev, P. Borchard, R. A. Kostin, A. K. Krasnykh, S. V. Kuzikov, and A. Romero, “High Efficiency Traveling Wave Linac With Tunable Energy”, in Proc. LINAC'22, Liverpool, UK, Aug.-Sep. 2022, pp. 727-730. doi:10.18429/JACoW-LINAC2022-THPOJO16
[n]	C. L. Chen, H.-P. Chang, C.-S. Fann, and K. L. Tsai, “A Monitoring System for TPS Linac”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 4272-4274. doi:10.18429/JACoW-IPAC2019-THPTS069
[n]	S. Nagaitsev, “Project X - New Multi Megawatt Proton Source at Fermilab”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper FROBN3, pp. 2566-2569. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search