Favourites
For Word
[n] G. Azzopardi, S. Redaelli, B. Salvachua, A. Muscat, and G. Valentino, “Automatic Beam Loss Threshold Selection for LHC Collimator Alignment”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 207. doi:10.18429/JACoW-ICALEPCS2019-MOPHA010
[n] J. T. Bradley III, L. N. Merrill, G. Rouleau, W. Roybal, and G. Sanchez, “Test Results of the Low-Stored-Energy -80 kV Regulator for Ion Sources at LANSCE”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1369-1371. doi:10.18429/JACoW-IPAC2019-TUPMP053
[n] R. T. Sanders et al., “The AGS Booster Low Frequency RF System”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 739-742.
[n] A. V. Tsakanian et al., “AREAL Solenoid, Dipole and Steering Magnets Design and Performance”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1223-1225. doi:10.18429/JACoW-IPAC2014-TUPRO078
[n] R. H. Scott, S. Bhattacharya, J. T. McLain, M. Paul, and R. C. Vondrasek, “Study of noble gas memory effect of ECR3 at ATLAS”, in Proc. ECRIS'24, Darmstadt, Germany, Sep. 2024, pp. 64-67. doi:10.18429/JACoW-ECRIS2024-MOP15
[n] S. Veseli et al., “Data Acquisition System for the APS Upgrade”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 842. doi:10.18429/JACoW-ICALEPCS2019-TUDPP02
[n] G. Raffi and B. E. Glendenning, “ALMA Software Project Management, Lessons Learned”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper TUP048, pp. 194-196.
[n] G. LeBlanc, M. Eriksson, and E. Wallén, “The MAX Wiggler”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPPH016, pp. 2476-2478.
[n] D. Bruno, W. Eng, G. Ganetis, R. F. Lambiase, and J. Sandberg, “Overview of the RHIC Insertion Region, Sextupole, and Snake Power Supply Systems”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper FPAH004, pp. 3663-3665.
[n] C. Gerth, F. Ludwig, and Ch. Schmidt, “Beam Based Measurements of the RF Amplitude Stability at FLASH using a Synchrotron Radiation Monitor”, in Proc. DIPAC'09, Basel, Switzerland, May 2009, paper TUPD22, pp. 342-344.
[n] K. Ohmi, “Study of Beam-beam effect at various collision scheme in LHC”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPP034, pp. 2593-2595.
[n] E. M. Sommer et al., “Commissioning of Super-ACO”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 46-49.
[n] J. C. Besson, X. Deletoille, J.-F. Lamarre, D. Lefebvre, and H. Rozelot, “The Machine Installation at SOLEIL”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPLS006, pp. 3275-3277.
[n] J. Cozzolino, M. Anerella, A. Jain, W. Louie, P. Muratore, and P. Wanderer, “Removal of Axial Twist in RHIC Insertion Quadrupole Magnets”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 3P002, pp. 3338-3340.
For LaTeX
Use Complete Form
For BibTeX
References
- G. Azzopardi, S. Redaelli, B. Salvachua, A. Muscat, and G. Valentino, “Automatic Beam Loss Threshold Selection for LHC Collimator Alignment”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 207.
- J. T. Bradley III, L. N. Merrill, G. Rouleau, W. Roybal, and G. Sanchez, “Test Results of the Low-Stored-Energy -80 kV Regulator for Ion Sources at LANSCE”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1369-1371.
- R. T. Sanders et al., “The AGS Booster Low Frequency RF System”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 739-742.
- A. V. Tsakanian et al., “AREAL Solenoid, Dipole and Steering Magnets Design and Performance”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1223-1225.
- R. H. Scott, S. Bhattacharya, J. T. McLain, M. Paul, and R. C. Vondrasek, “Study of noble gas memory effect of ECR3 at ATLAS”, in Proc. 26th International Workshop on ECR Ion Sources (ECRIS'24), Darmstadt, Germany, Sep. 2024, pp. 64-67.
- S. Veseli et al., “Data Acquisition System for the APS Upgrade”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 842.
- G. Raffi and B. E. Glendenning, “ALMA Software Project Management, Lessons Learned”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper TUP048, pp. 194-196.
- G. LeBlanc, M. Eriksson, and E. Wallén, “The MAX Wiggler”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPPH016, pp. 2476-2478.
- D. Bruno, W. Eng, G. Ganetis, R. F. Lambiase, and J. Sandberg, “Overview of the RHIC Insertion Region, Sextupole, and Snake Power Supply Systems”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper FPAH004, pp. 3663-3665.
- C. Gerth, F. Ludwig, and Ch. Schmidt, “Beam Based Measurements of the RF Amplitude Stability at FLASH using a Synchrotron Radiation Monitor”, in Proc. 9th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'09), Basel, Switzerland, May 2009, paper TUPD22, pp. 342-344.
- K. Ohmi, “Study of Beam-beam effect at various collision scheme in LHC”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPP034, pp. 2593-2595.
- E. M. Sommer et al., “Commissioning of Super-ACO”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 46-49.
- J. C. Besson, X. Deletoille, J.-F. Lamarre, D. Lefebvre, and H. Rozelot, “The Machine Installation at SOLEIL”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THPLS006, pp. 3275-3277.
- J. Cozzolino, M. Anerella, A. Jain, W. Louie, P. Muratore, and P. Wanderer, “Removal of Axial Twist in RHIC Insertion Quadrupole Magnets”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 3P002, pp. 3338-3340.
Back to search