Warning
Some papers titles are all uppercase, you must correct this before using this reference.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] A. Akiyama, T. Katoh, Ta. Kubo, S. Kurokawa, T. Nakamura, and M. Yoshida, “Magnet Power Supply System for KEK-B Accelerator”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP21G, pp. 2085-2090.
[n] K. Sato et al., “RF Accelerating System for TARN II”, in Proc. Cyclotrons'86, Tokyo, Japan, Oct. 1986, paper I2-02, pp. 333-336.
[n] F. Furuta, T. Konomi, and K. Saito, “Vacuum Evacuation Effect on ICHIRO 9-cell Cavities during Vertical Test”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPE006, pp. 3350-3352.
[n] E.-S. Kim, I.-M. Huang, and M. Yoon, “Coherent Beam-Beam Effects”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPPH118, pp. 1942-1944.
[n] A. Ushakov, K. Floettmann, S. Riemann, and K. N. Sanosyan, “Radiation Levels and Activation at the ILC Positron Source”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPLS046, pp. 2478-2480.
[n] V. V. Paramonov, K. Floettmann, M. Krasilnikov, L. V. Kravchuk, and F. Stephan, “The PITZ Booster CavityA Prototype for the ILC Positron Injector Cavities”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPPP006, pp. 1030-1032.
[n] M. Zobov et al., “DAFNE Experience with Negative Momentum Compaction”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUODFI02, pp. 989-991.
[n] K. Saito, F. Furuta, and T. Konomi, “Improvements of Cleaning Methods for High Q-slope Problem in Full End Single Cell Cavity”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPE010, pp. 3362-3364.
[n] V. Schlott, ?à. Andersson, M. Dach, S. C. Leemann, M. Rohrer, and A. Streun, “Design and Calibration of an Emittance Monitor for the PSI XFEL Project”, in Proc. DIPAC'07, Venice, Italy, May 2007, paper TUPC25, pp. 198-200.
[n] P. Cameron, I. Ben-Zvi, J. Kewisch, and V. Litvinenko, “A First Look at Beam Diagnostics for the RHIC Electron Cooling Project”, in Proc. DIPAC'05, Lyon, France, Jun. 2005, paper POM004, pp. XX-XX.
[n] J. I. M. Botman et al., “The Accelerating Cavity of the Racetrack Microtron Eindhoven”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEP026L, pp. 1964-1966.
[n] R. Garoby, E. Grier, E. Jensen, A. Mitra, and R. L. Poirier, “The PS 40 MHz Bunching Cavity”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 2P036, pp. 2953-2955.
[n] S. L. Kramer and P. Cameron, “Beam Loss Monitors for NSLS-II Storage Ring”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOP274, pp. 621-623.
[n] Q. Gu, Q. G. Zhou, Z. M. Dai, D. M. Li, and Z. T. Zhao, “Design of an Intense THz Light Source Based on Femto-Second Electron Bunches”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper TUP11008, pp. XX-XX.
[n] C. Limborg and J. Sebek, “Measurement of High Q RF Cavity Impedance with Beam”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper THP37C, pp. 972-974.
[n] O. Kamigaito, “UPGRADE OF RILAC INJECTOR”, in Proc. Cyclotrons'04, Tokyo, Japan, Oct. 2004, paper 20P24, pp. XX-XX.
[n] T. Higo, K. Kubo, and K. Yokoya, “Tolerances in X-Band Main Linacs of Future Linear Colliders”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper FRA22, pp. 3435-3437.
[n] E.-S. Kim, “Investigations of Beam Instabilities in PLS Storage Ring”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper WEPRI091, pp. 1517-1519.
[n] E.-S. Kim, “Beam Instabilities at the PLS Storage Ring”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPPB043, pp. 3105-3107.
[n] S. Koda et al., “Feasibility Study on Introducing a Superconducting Wiggler to Saga Light Source”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPAE006, pp. 1021-1023.
[n] M. Satoh, K. Furukawa, M. Kikuchi, H. Koiso, Y. Ogawa, and T. Suwada, “Two-Bunch Orbit Correction Using the Wake Field Kick”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper FPAB035, pp. 3368-3370.
[n] G. E. McMichael, “High-current CW RFQ's”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2093-2098.
[n] A. V. Liyu, W. Blokland, and D. H. Thompson, “LabVIEW Library to EPICS Channel Access”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper FPAT053, pp. 3233-3234.
[n] B. F. White, S. T. Craig, V. A. Mason, S. M. Morsink, and D. L. Smyth, “Controlled Magnet Excitation for Electron Beam Scanning in Industrial Irradiators”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1855-1858.
[n] C.-Y. Hsieh, S.-H. Chen, I. Jovanovic, and M. W. Lin, “Efficiency Enhancement Induced by a Precursor Electron Bunch in Quasi-Phase Matched Direct Laser Acceleration”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 3289-3291. doi:10.18429/JACoW-IPAC2017-WEPVA017
[n] S. V. Kuzikov, J. L. Hirshfield, M. E. Plotkin, and A. A. Vikharev, “Compact Single-channel Ka-band SLED-II Pulse Compressor”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPCH165, pp. 1411-1413.
[n] S. Wang, M. Y. Huang, and S. Y. Xu, “Preliminary Study on the Injection System Upgrade for CSNS-II”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2037-2039. doi:10.18429/JACoW-IPAC2019-TUPTS048
[n] A. V. Velez, A. Frahm, J. Knobloch, and A. Neumann, “Cold Bead-Pull Test Stand for SRF Cavities”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 748-750. doi:10.18429/JACoW-LINAC2016-THOP03
[n] J. S. Lee and C.-Y. Lee, “The Design and Manufacture of a 300 keV Heavy Ion Implanter for Surface Modification of Materials”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPCH191, pp. 2382-2384.
[n] G. Cox, “A .NET Interface for Channel Access”, in Proc. PCaPAC'08, Ljbuljana, Slovenia, Oct. 2008, paper TUP022, pp. 134-136.
[n] A. N. Ivanov, S. N. Andrianov, N. V. Kulabukhova, A. A. Sholokhova, E. Krushinevskii, and E. Sboeva, “Matrix Representation of Lie Transform in TensorFlow”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3438-3440. doi:10.18429/JACoW-IPAC2018-THPAK088
[n] R.C. Singleterry Jr., G. R. Imel, and G. E. McMichael, “Moderator/Collimator for a Proton/Deuteron Linac to Produce a High-Intensity, High- Quality Thermal Neutron Beam for Neutron Radiography”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TAC12, pp. 149-151.
[n] S. Prat, W.-D. Moeller, and D. Kostin, “Industrialization process for XFEL power couplers and volume manufacturing”, in Proc. SRF'07, Beijing, China, Oct. 2007, paper TH202, pp. XX-XX.
[n] J. M. Jowett, “Colliding Heavy Ions in the LHC”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 584-589. doi:10.18429/JACoW-IPAC2018-TUXGBD2
[n] L. Emery, “Application of Model-Independent Analysis Using the SDDS Toolkit”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper FPAG002, pp. 3464-3466.
[n] A. S. Kuznetsov et al., “Beam Injector for Vacuum Insulated Tandem Accelerator”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 529-531. doi:10.18429/JACoW-RUPAC2016-WEPSB075
[n] L. Emery, “Recent Operational Data on Continuous Top-up Operation at the Advanced Photon Source”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPPH064, pp. 2599-2601.
[n] Y. Y. Lee et al., “The Muon g-2 Storage Ring Magnet”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP04F, pp. 1999-2001.
[n] V. I. Shvedunov, H. Euteneuer, and K.-H. Kaiser, “Bunch Space Charge Limits in an RTM”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 8V035, pp. 1902-1904.
[n] T. Zaugg, C. Rose, J. D. Schneider, J. Sherman, and R. Stevens Jr, “Operation of a Microwave Proton Source in Pulsed Mode”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TH4055, pp. 893-895.
[n] A. P. Kuznetsov, P. V. Sasorov, and D. A. Sobur, “Plasma lens investigation for the heavy ion accelerator AT ITEP”, in Proc. RuPAC'06, Novosibirsk, Russia, Sep. 2006, paper MOHP16, pp. XX-XX.
[n] P. Den Hartog, G. Decker, and L. Emery, “Dual Canted Undulators at the Advanced Photon Source”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper MPPB004, pp. 833-835.
[n] A. Kalinin and V. Smaluk Budker Institute of Nuclear Physics, “Turn-By-Turn Phase Space Diagram Construction for Non-Linear Betatron Oscillation”, in Proc. DIPAC'99, Chester, UK, May 1999, paper PS06, pp. XX-XX.
For LaTeX
Use Complete Form
For BibTeX
References
- A. Akiyama, T. Katoh, Ta. Kubo, S. Kurokawa, T. Nakamura, and M. Yoshida, “Magnet Power Supply System for KEK-B Accelerator”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper TUP21G, pp. 2085-2090.
- K. Sato et al., “RF Accelerating System for TARN II”, in Proc. 11th Int. Cyclotron Conf. and Their Applications (Cyclotrons'86), Tokyo, Japan, Oct. 1986, paper I2-02, pp. 333-336.
- F. Furuta, T. Konomi, and K. Saito, “Vacuum Evacuation Effect on ICHIRO 9-cell Cavities during Vertical Test”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPE006, pp. 3350-3352.
- E.-S. Kim, I.-M. Huang, and M. Yoon, “Coherent Beam-Beam Effects”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TPPH118, pp. 1942-1944.
- A. Ushakov, K. Floettmann, S. Riemann, and K. N. Sanosyan, “Radiation Levels and Activation at the ILC Positron Source”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper WEPLS046, pp. 2478-2480.
- V. V. Paramonov, K. Floettmann, M. Krasilnikov, L. V. Kravchuk, and F. Stephan, “The PITZ Booster CavityA Prototype for the ILC Positron Injector Cavities”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper RPPP006, pp. 1030-1032.
- M. Zobov et al., “DAFNE Experience with Negative Momentum Compaction”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUODFI02, pp. 989-991.
- K. Saito, F. Furuta, and T. Konomi, “Improvements of Cleaning Methods for High Q-slope Problem in Full End Single Cell Cavity”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPE010, pp. 3362-3364.
- V. Schlott, ?à. Andersson, M. Dach, S. C. Leemann, M. Rohrer, and A. Streun, “Design and Calibration of an Emittance Monitor for the PSI XFEL Project”, in Proc. 8th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'07), Venice, Italy, May 2007, paper TUPC25, pp. 198-200.
- P. Cameron, I. Ben-Zvi, J. Kewisch, and V. Litvinenko, “A First Look at Beam Diagnostics for the RHIC Electron Cooling Project”, in Proc. 7th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'05), Lyon, France, Jun. 2005, paper POM004, pp. XX-XX.
- J. I. M. Botman et al., “The Accelerating Cavity of the Racetrack Microtron Eindhoven”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper WEP026L, pp. 1964-1966.
- R. Garoby, E. Grier, E. Jensen, A. Mitra, and R. L. Poirier, “The PS 40 MHz Bunching Cavity”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 2P036, pp. 2953-2955.
- S. L. Kramer and P. Cameron, “Beam Loss Monitors for NSLS-II Storage Ring”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper MOP274, pp. 621-623.
- Q. Gu, Q. G. Zhou, Z. M. Dai, D. M. Li, and Z. T. Zhao, “Design of an Intense THz Light Source Based on Femto-Second Electron Bunches”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper TUP11008, pp. XX-XX.
- C. Limborg and J. Sebek, “Measurement of High Q RF Cavity Impedance with Beam”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper THP37C, pp. 972-974.
- O. Kamigaito, “UPGRADE OF RILAC INJECTOR”, in Proc. 17th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'04), Tokyo, Japan, Oct. 2004, paper 20P24, pp. XX-XX.
- T. Higo, K. Kubo, and K. Yokoya, “Tolerances in X-Band Main Linacs of Future Linear Colliders”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper FRA22, pp. 3435-3437.
- E.-S. Kim, “Investigations of Beam Instabilities in PLS Storage Ring”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper WEPRI091, pp. 1517-1519.
- E.-S. Kim, “Beam Instabilities at the PLS Storage Ring”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper RPPB043, pp. 3105-3107.
- S. Koda et al., “Feasibility Study on Introducing a Superconducting Wiggler to Saga Light Source”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper RPAE006, pp. 1021-1023.
- M. Satoh, K. Furukawa, M. Kikuchi, H. Koiso, Y. Ogawa, and T. Suwada, “Two-Bunch Orbit Correction Using the Wake Field Kick”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper FPAB035, pp. 3368-3370.
- G. E. McMichael, “High-current CW RFQ's”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2093-2098.
- A. V. Liyu, W. Blokland, and D. H. Thompson, “LabVIEW Library to EPICS Channel Access”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper FPAT053, pp. 3233-3234.
- B. F. White, S. T. Craig, V. A. Mason, S. M. Morsink, and D. L. Smyth, “Controlled Magnet Excitation for Electron Beam Scanning in Industrial Irradiators”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1855-1858.
- C.-Y. Hsieh, S.-H. Chen, I. Jovanovic, and M. W. Lin, “Efficiency Enhancement Induced by a Precursor Electron Bunch in Quasi-Phase Matched Direct Laser Acceleration”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 3289-3291.
- S. V. Kuzikov, J. L. Hirshfield, M. E. Plotkin, and A. A. Vikharev, “Compact Single-channel Ka-band SLED-II Pulse Compressor”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPCH165, pp. 1411-1413.
- S. Wang, M. Y. Huang, and S. Y. Xu, “Preliminary Study on the Injection System Upgrade for CSNS-II”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2037-2039.
- A. V. Velez, A. Frahm, J. Knobloch, and A. Neumann, “Cold Bead-Pull Test Stand for SRF Cavities”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 748-750.
- J. S. Lee and C.-Y. Lee, “The Design and Manufacture of a 300 keV Heavy Ion Implanter for Surface Modification of Materials”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper WEPCH191, pp. 2382-2384.
- G. Cox, “A .NET Interface for Channel Access”, in Proc. 7th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'08), Ljbuljana, Slovenia, Oct. 2008, paper TUP022, pp. 134-136.
- A. N. Ivanov, S. N. Andrianov, N. V. Kulabukhova, A. A. Sholokhova, E. Krushinevskii, and E. Sboeva, “Matrix Representation of Lie Transform in TensorFlow”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3438-3440.
- R.C. Singleterry Jr., G. R. Imel, and G. E. McMichael, “Moderator/Collimator for a Proton/Deuteron Linac to Produce a High-Intensity, High- Quality Thermal Neutron Beam for Neutron Radiography”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper TAC12, pp. 149-151.
- S. Prat, W.-D. Moeller, and D. Kostin, “Industrialization process for XFEL power couplers and volume manufacturing”, in Proc. 13th Int. Conf. RF Superconductivity (SRF'07), Beijing, China, Oct. 2007, paper TH202, pp. XX-XX.
- J. M. Jowett, “Colliding Heavy Ions in the LHC”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 584-589.
- L. Emery, “Application of Model-Independent Analysis Using the SDDS Toolkit”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper FPAG002, pp. 3464-3466.
- A. S. Kuznetsov et al., “Beam Injector for Vacuum Insulated Tandem Accelerator”, in Proc. 25th Russian Particle Accelerator Conf. (RuPAC'16), Saint Petersburg, Russia, Nov. 2016, pp. 529-531.
- L. Emery, “Recent Operational Data on Continuous Top-up Operation at the Advanced Photon Source”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPPH064, pp. 2599-2601.
- Y. Y. Lee et al., “The Muon g-2 Storage Ring Magnet”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper TUP04F, pp. 1999-2001.
- V. I. Shvedunov, H. Euteneuer, and K.-H. Kaiser, “Bunch Space Charge Limits in an RTM”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 8V035, pp. 1902-1904.
- T. Zaugg, C. Rose, J. D. Schneider, J. Sherman, and R. Stevens Jr, “Operation of a Microwave Proton Source in Pulsed Mode”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper TH4055, pp. 893-895.
- A. P. Kuznetsov, P. V. Sasorov, and D. A. Sobur, “Plasma lens investigation for the heavy ion accelerator AT ITEP”, in Proc. 20th Russian Particle Accelerator Conf. on Charged Particle Accelerators (RuPAC'06), Novosibirsk, Russia, Sep. 2006, paper MOHP16, pp. XX-XX.
- P. Den Hartog, G. Decker, and L. Emery, “Dual Canted Undulators at the Advanced Photon Source”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper MPPB004, pp. 833-835.
- A. Kalinin and V. Smaluk Budker Institute of Nuclear Physics, “Turn-By-Turn Phase Space Diagram Construction for Non-Linear Betatron Oscillation”, in Proc. 4th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'99), Chester, UK, May 1999, paper PS06, pp. XX-XX.
Back to search