Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] S. Korenev, “Measurements of Beam Current for Relativistic Electrons in Air by Current Transformers”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPAH105, pp. 2332-2334.
[n] P. J. Spiller et al., “Status of the FAIR SIS100/300 Synchrotron Design”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPAN014, pp. 1419-1421.
[n] R. Kersevan, P. Berkvens, and P. Colomp, “Calculation, Measurement and Analysis of Vacuum Pressure Data and Related Bremsstrahlung Levels on Straight Sections of the ESRF”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPCH171, pp. 1417-1419.
[n] H. Gassot et al., “Mechanical Stiffening of SRF Niobium Cavities by Thermal Sprayed Coating”, in Proc. SRF'99, Santa Fe, NM, USA, Nov. 1999, paper WEP024, pp. 472-477.
[n] V. S. Alexandrov et al., “JINR Tau-Charm Factory Design Considerations”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 195-198.
[n] V. V. Kolotiy et al., “The Kiev 240 cm Isochronous Cyclotron”, in Proc. Cyclotrons'72, Vancouver, Canada, Jul. 1972, pp. 87-95.
[n] T. Kaneyasu, Y. Iwasaki, S. Koda, and Y. Takabayashi, “Present Status of the SAGA-LS Control System”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper TUP098, pp. 307-309.
[n] K. Primdahl and R. Kustom, “Cooling the APS Storage Ring Radio-Frequency Accelerating Cavities Thermal/Stress/Fatigue Analysis and Cavity Cooling Configuration”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WPP14, pp. 1690-1692.
[n] A. Radeva, J. M. E. Elyn, F. Locci, T. Oulevey, and M. Vanden Eynden, “Selecting a Linux Operating System for CERN Accelerator Controls”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 1475-1479. doi:10.18429/JACoW-ICALEPCS2023-THPDP064
[n] R. Sundelin, “Superconducting RF Activities at Cornell University”, in Proc. SRF'84, Geneva, Switzerland, Jul. 1984, paper SRF84-3, pp. XX-XX.
[n] E. Matias, D. Beauregard, R. Berg, D. Chabot, T. Wilson, and G. Wright, “The Canadian Light Source Control System - A Case Study in the Use of Single Board Computers and Industrial PC Equipment for Synchrotron Control”, in Proc. PCaPAC'08, Ljbuljana, Slovenia, Oct. 2008, paper WEZ02, pp. 157-158.
[n] R. V. Latham, “Field - Induced Electron Emission from Localized Sites on Extended - Area Electrodes”, in Proc. SRF'84, Geneva, Switzerland, Jul. 1984, paper SRF84-29, pp. XX-XX.
For LaTeX
Use Complete Form
For BibTeX
References
- S. Korenev, “Measurements of Beam Current for Relativistic Electrons in Air by Current Transformers”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPAH105, pp. 2332-2334.
- P. J. Spiller et al., “Status of the FAIR SIS100/300 Synchrotron Design”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUPAN014, pp. 1419-1421.
- R. Kersevan, P. Berkvens, and P. Colomp, “Calculation, Measurement and Analysis of Vacuum Pressure Data and Related Bremsstrahlung Levels on Straight Sections of the ESRF”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPCH171, pp. 1417-1419.
- H. Gassot et al., “Mechanical Stiffening of SRF Niobium Cavities by Thermal Sprayed Coating”, in Proc. 9th Int. Conf. RF Superconductivity (SRF'99), Santa Fe, NM, USA, Nov. 1999, paper WEP024, pp. 472-477.
- V. S. Alexandrov et al., “JINR Tau-Charm Factory Design Considerations”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 195-198.
- V. V. Kolotiy et al., “The Kiev 240 cm Isochronous Cyclotron”, in Proc. 6th Int. Cyclotron Conf. (Cyclotrons'72), Vancouver, Canada, Jul. 1972, pp. 87-95.
- T. Kaneyasu, Y. Iwasaki, S. Koda, and Y. Takabayashi, “Present Status of the SAGA-LS Control System”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper TUP098, pp. 307-309.
- K. Primdahl and R. Kustom, “Cooling the APS Storage Ring Radio-Frequency Accelerating Cavities Thermal/Stress/Fatigue Analysis and Cavity Cooling Configuration”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper WPP14, pp. 1690-1692.
- A. Radeva, J. M. E. Elyn, F. Locci, T. Oulevey, and M. Vanden Eynden, “Selecting a Linux Operating System for CERN Accelerator Controls”, in Proc. 19th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'23), Cape Town, South Africa, Oct. 2023, paper THPDP064, pp. 1475-1479.
- R. Sundelin, “Superconducting RF Activities at Cornell University”, in Proc. 2nd Int. Conf. RF Superconductivity (SRF'84), Geneva, Switzerland, Jul. 1984, paper SRF84-3, pp. XX-XX.
- E. Matias, D. Beauregard, R. Berg, D. Chabot, T. Wilson, and G. Wright, “The Canadian Light Source Control System - A Case Study in the Use of Single Board Computers and Industrial PC Equipment for Synchrotron Control”, in Proc. 7th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'08), Ljbuljana, Slovenia, Oct. 2008, paper WEZ02, pp. 157-158.
- R. V. Latham, “Field - Induced Electron Emission from Localized Sites on Extended - Area Electrodes”, in Proc. 2nd Int. Conf. RF Superconductivity (SRF'84), Geneva, Switzerland, Jul. 1984, paper SRF84-29, pp. XX-XX.
Back to search