Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] St. Sattler et al., “Manufacturing of the First of Series SIS100 Dipole Magnet”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOODB101, pp. 31-33.
[n] Y. Hu, C. Tang, H. Chen, D. Tong, and Y. Lin, “The Research of Electron RF Gun Based on X-Band DAW(Disk-and-Washer) Accelerating Structure”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper MOP10002, pp. XX-XX.
[n] A. Donateo, V. Nassisi, and G. Raganato, “Electron Emission from a Niobium Photocathode”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUP1B07, pp. 2364-2366.
[n] J. A. Carter, “Benchmarking and Calibration of Monte Carlo Vacuum Simulations with SynRad and MolFlow+”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3695-3697. doi:10.18429/JACoW-IPAC2016-THPMY018
[n] K. B. Unser, “Design and Preliminary Tests of a Beam Intensity Monitor for LEP”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 71-74.
[n] M. Gensch et al., “THz Facility at ELBE: A Versatile Test Facility for Electron Bunch Diagnostics on Quasi-CW Electron Beams”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 933-934. doi:10.18429/JACoW-IPAC2014-TUZA02
[n] H. Nishimura and T. Scarvie, “Particle Tracking and Simulation on the .NET Framework”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPCH145, pp. 2263-2265.
[n] S. M. Polozov, T. V. Bondarenko, E. S. Masunov, V. I. Rashchikov, and A. V. Voronkov, “High Intensity Transient Beam Dynamic Study in Travelling Wave Electron Accelerators with Accounting of Beam Loading Effect”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPS037, pp. 682-684.
[n] Ch. Wiebers, M. Holz, G. Kube, D. Noelle, G. Priebe, and H.-Ch. Schroeder, “Scintillating Screen Monitors for Transverse Electron Beam Profile Diagnostics at the European XFEL”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper WEPF03, pp. 807-810.
[n] A. A. Asseev and S. V. Sokolov, “Influence of Thin Internal Target on the Bent Crystal Extraction Efficiency”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 320-322.
[n] M. Ishii, T. Masuda, T. Ohata, and R. T. Tanaka, “Development of a PC/104-Plus Based CPU Module with Power over Ethernet Capability”, in Proc. PCaPAC'08, Ljbuljana, Slovenia, Oct. 2008, paper WEP010, pp. 186-188.
[n] G. Hall et al., “Highly Charged Ion Beam Transport by Space Charge Compensation Conditions”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP070G, pp. 2426-2428.
[n] J. B. Murphy et al., “NSLS II: A Future Source for the NSLS”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper THPKF088, pp. 2457-2459.
[n] M. Heilmann et al., “A Coupled RFQ-IH Cavity for the Neutron Source FRANZ”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPWO017, pp. 3797-3799.
[n] P. Hodgson, C. N. Booth, P. J. Smith, and J. S. Tarrant, “MICE Target Hardware”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPE063, pp. 3488-3490.
[n] N. Yu. Kazarinov, V. Aleksandrov, Y. Jongen, V. Shevtsov, and A. Tuzikov, “Screening of Cyclotron Magnetic Field in C400 Axial Injection Beam-line”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPAN080, pp. 1559-1561.
[n] S. I. Tomin et al., “Progress in Automatic Software-based Optimization of Accelerator Performance”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3064-3066. doi:10.18429/JACoW-IPAC2016-WEPOY036
[n] J. E. Lerch, T. J. Bender, O. K. Mulvany, and M. E. Szubert, “APS Upgrade Insertion Device Vacuum Chamber Design”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 450-452. doi:10.18429/JACoW-NAPAC2019-TUPLS02
For LaTeX
Use Complete Form
For BibTeX
References
- St. Sattler et al., “Manufacturing of the First of Series SIS100 Dipole Magnet”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOODB101, pp. 31-33.
- Y. Hu, C. Tang, H. Chen, D. Tong, and Y. Lin, “The Research of Electron RF Gun Based on X-Band DAW(Disk-and-Washer) Accelerating Structure”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper MOP10002, pp. XX-XX.
- A. Donateo, V. Nassisi, and G. Raganato, “Electron Emission from a Niobium Photocathode”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper TUP1B07, pp. 2364-2366.
- J. A. Carter, “Benchmarking and Calibration of Monte Carlo Vacuum Simulations with SynRad and MolFlow+”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3695-3697.
- K. B. Unser, “Design and Preliminary Tests of a Beam Intensity Monitor for LEP”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 71-74.
- M. Gensch et al., “THz Facility at ELBE: A Versatile Test Facility for Electron Bunch Diagnostics on Quasi-CW Electron Beams”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 933-934.
- H. Nishimura and T. Scarvie, “Particle Tracking and Simulation on the .NET Framework”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper WEPCH145, pp. 2263-2265.
- S. M. Polozov, T. V. Bondarenko, E. S. Masunov, V. I. Rashchikov, and A. V. Voronkov, “High Intensity Transient Beam Dynamic Study in Travelling Wave Electron Accelerators with Accounting of Beam Loading Effect”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper MOPS037, pp. 682-684.
- Ch. Wiebers, M. Holz, G. Kube, D. Noelle, G. Priebe, and H.-Ch. Schroeder, “Scintillating Screen Monitors for Transverse Electron Beam Profile Diagnostics at the European XFEL”, in Proc. 2nd Int. Beam Instrumentation Conf. (IBIC'13), Oxford, UK, Sep. 2013, paper WEPF03, pp. 807-810.
- A. A. Asseev and S. V. Sokolov, “Influence of Thin Internal Target on the Bent Crystal Extraction Efficiency”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 320-322.
- M. Ishii, T. Masuda, T. Ohata, and R. T. Tanaka, “Development of a PC/104-Plus Based CPU Module with Power over Ethernet Capability”, in Proc. 7th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'08), Ljbuljana, Slovenia, Oct. 2008, paper WEP010, pp. 186-188.
- G. Hall et al., “Highly Charged Ion Beam Transport by Space Charge Compensation Conditions”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper MOP070G, pp. 2426-2428.
- J. B. Murphy et al., “NSLS II: A Future Source for the NSLS”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper THPKF088, pp. 2457-2459.
- M. Heilmann et al., “A Coupled RFQ-IH Cavity for the Neutron Source FRANZ”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPWO017, pp. 3797-3799.
- P. Hodgson, C. N. Booth, P. J. Smith, and J. S. Tarrant, “MICE Target Hardware”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper WEPE063, pp. 3488-3490.
- N. Yu. Kazarinov, V. Aleksandrov, Y. Jongen, V. Shevtsov, and A. Tuzikov, “Screening of Cyclotron Magnetic Field in C400 Axial Injection Beam-line”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUPAN080, pp. 1559-1561.
- S. I. Tomin et al., “Progress in Automatic Software-based Optimization of Accelerator Performance”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3064-3066.
- J. E. Lerch, T. J. Bender, O. K. Mulvany, and M. E. Szubert, “APS Upgrade Insertion Device Vacuum Chamber Design”, in Proc. North American Particle Accelerator Conf. (NAPAC'19), Lansing, MI, USA, Sep. 2019, pp. 450-452.
Back to search