JaCoW Logo

Reference Search

Warning
Some papers have malformed authors, please correct this before using these references.

The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	R. Jones, B. Cheo, and J. Shmoys, “Beam Loading and Frequency Detuning in a Linear Accelerator”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper MO3-17, pp. 82-85. 
[n]	M. Klein, A.-S. Mueller, and K. G. Sonnad, “Simulations of the Microbunching Instability at ANKA using a Vlasov-Fokker-Planck Solver”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPC095, pp. 2232-2234. 
[n]	M. Bai et al., “RHIC Spin Flipper Status and Simulation Studies”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOP191, pp. 447-449. 
[n]	R. Miyamoto et al., “Preparation Towards the Ess Linac Ion Source and Lebt Beam Commissioning on Ess Site”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 874-877. doi:10.18429/JACoW-IPAC2018-TUPAF064
[n]	A. Zaltsman et al., “The Upgrade Project for the RF System for the Brookhaven AGS”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1241-1244. 
[n]	R. J. England et al., “Manufacture and Testing of Optical-scale Accelerator Structures from Silicon and Silica”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUYB02, pp. 1050-1053. 
[n]	S. Morales Vigo et al., “Calibration of the LHC Diamond beam loss monitors for LHC Run 3”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4641-4644. doi:10.18429/JACoW-IPAC2023-THPL085
[n]	S. Seletskiy, J. Choi, K. Ha, and R. M. Smith, “Upgrade of NSLS-II Active Interlock System”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 4140-4142. doi:10.18429/JACoW-IPAC2016-THPOY023
[n]	B. Goddard, W. Bartmann, I. Efthymiopoulos, Y. Papaphilippou, and A. S. Parfenova, “Beam Transfer Systems for the LAGUNA-LBNO Long Baseline Neutrino Beam from the CERN SPS”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPFI051, pp. 395-397. 
[n]	F. Antoniou et al., “Intrabeam Scattering Studies at the Swiss Light Source”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPR057, pp. 1951-1953. 
[n]	C. Piel, “Highly Customized Industrialized Linacs for Applications in Scientific Research”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEIM04, pp. 1967-1971. 
[n]	K. Schindl, “Simultaneous Dynamic Compensation of Stopbands and Multipurpose Location of Correction Lenses in the CERN PS Booster”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3562-3565. 
[n]	D. F. Cosgrove, R. P. Johnson, and S. C. Snowdon, “A Pulsed Setpum Magnet for Extraction from the Fermilab Booster”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1263-1266. 
[n]	P. A. P. Nghiem et al., “Advanced Concepts and Methods for Very High Intensity Linacs”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3155-3160. doi:10.18429/JACoW-IPAC2016-THYA01
[n]	K. Schindl and H. Schoenauer, “A Pulsed Spallation Source in Central Europe”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 432-435. 
[n]	M. Corlier et al., “Commissioning of OPHeLIE : The New Electromagnetic Crossed Overlapped Undulator at Super-ACO”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THA29, pp. 2686-2688. 
[n]	R. Cappi, N. Garoby, N. Rasmussen, J. P. Riunaud, H. Schoenauer, and K. Schindl, “Upgrading the CERN PS Booster to 1 GeV for Improved Antiproton Production”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1614-1617. 
[n]	M. Peryt, R. Billen, M. Martin Marquez, and Z. Zaharieva, “Database and Interface Modifications: Change Management Without Affecting the Clients”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOPKN010, pp. 106-109. 
[n]	R. Calaga, L. Ficcadenti, E. Métral, R. Tomas, J. Tuckmantel, and F. Zimmermann, “Proton-Beam Emittance Growth in SPS Coasts”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPP007, pp. 3737-3739. 
[n]	D. Beltran, J. Campmany, J. Delgado, A. Molins, and J. A. Perlas, “The LLS Magnet Test Facility as an Evaluation of the Accelerator Control System Requirements”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP24C, pp. 1682-1684. 
[n]	P. A. P. Nghiem, N. Chauvin, D. Uriot, M. Valette, and W. Simeoni, “A Precise Determination of the Core-halo Limit”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3208-3210. doi:10.18429/JACoW-IPAC2014-THPME003
[n]	Y. Li, H. P. Bohlen, R. N. Tornoe, and E. L. Wright, “IOTs: The Next Generation RF Power Sources for Accelerators”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPCH168, pp. 0-3645. 
[n]	L. O. Dallin and D. Bertwistle, “Magnet Design Considerations for an Ultralow Emittance Canadian Light Source”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2413-2415. doi:10.18429/JACoW-IPAC2018-WEPMF021
[n]	W. E. Fischer, “Application of Spallation Neutron Sources”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper THYLA001, pp. 114-118. 
[n]	K. L. Brown, “A Second-Order Magnetic Optical Achromat”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3490-3493. 
[n]	J. D. Hepburn, B. G. Chidley, M. R. Shubaly, and J. Ungrin, “Design Criteria for High Voltage, High Current Accelerating Columns”, in Proc. LINAC'79, Montauk, NY, USA, Sep. 1979, paper S8-9, pp. 448-452. 
[n]	M. Liu, D. K. Liu, C. X. Yin, and L. Y. Zhao, “A New Timing System: the Real-time Synchronized Data Bus”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPEA032, pp. 1396-1398. 
[n]	B. Arfin and F. Friedlander, “Study and Design of the NAL Main Ring Accelerator Cavity”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 237-241. 
[n]	M. R. Shubaly, “Ion Source Development and Injector Design for ZEBRA”, in Proc. LINAC'81, Santa Fe, NM, USA, Oct. 1981, paper G204, pp. 251-253. 
[n]	T. P. Wangler, A. Cimabue, J. Merson, R. S. Mills, R. Wood, and L. M. Young, “Superconducting RFQ Development at Los Alamos”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper TH4-09, pp. 627-629. 
[n]	R. E. Laxdal et al., “Beam Commissioning and First Operation of the ISAC DTL at TRIUMF”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper FPAH112, pp. 3942-3944. 
[n]	J. Shmoys, B. Cheo, and R. Jones, “Cascaded Transmission Line Model for Global DTL Analysis”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper WE3-12, pp. 332-334. 
[n]	M. Martinello et al., “Tailoring Surface Impurity Content to Maximize Q-factors of Superconducting Resonators”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2258-2261. doi:10.18429/JACoW-IPAC2016-WEPMR003
[n]	P. Quigley, S. Belomestnykh, and R. Kaplan, “Digital Cryogenic Control System for Superconducting RF Cavities in CESR”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAG008, pp. 1437-1439. 
[n]	L. Lari, M. Eshraqi, L. S. Esposito, L. Tchelidze, F. Cerutti, and A. Mereghetti, “FLUKA Modeling of the ESS Accelerator”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 434-437. doi:10.18429/JACoW-IPAC2015-MOPJE058
[n]	J. C. Dooling, F. R. Brumwell, W. S. Czyz, K. Harkay, M. K. Lien, and G. E. McMichael, “Observations of Electrons in the Intense Pulse Neutron Source (IPNS) Rapid Cycling Synchrotron (RCS)”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper ROPA007, pp. 592-594. 
[n]	M. A. Fraser, R. M. Jones, M. Lindroos, and M. Pasini, “Beam Dynamics Studies for the HIE-ISOLDE Linac at CERN”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH6PFP026, pp. 3753-3755. 
[n]	M. Mouat, E. Klassen, K. S. Lee, J. Pon, and P. Yogendran, “Disk Storage Upgrade in TRIUMF's Central Control System”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper MOPDO020, pp. 2037-2039. 
[n]	M. Valette and P. A. P. Nghiem, “Emittances of the Core and of the Halo”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 99-101. doi:10.18429/JACoW-IPAC2015-MOPWA010
[n]	P. A. P. Nghiem, N. Chauvin, L. Ducrot, and M. Valette, “Using of the MENT Method for Reconstruction of 2D Particle Distributions in IFMIF Accelerators”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 668-670. doi:10.18429/JACoW-IPAC2016-MOPOR032
[n]	X. He, J. Lei, and J. R. Zhang, “Development of a High-Power High-Directivity Directional Coupler and Four Power Dividers for S-Band”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2422-2424. doi:10.18429/JACoW-IPAC2018-WEPMF031
[n]	S. Magyary et al., “Operating Experience with a New Accelerator Control System Based upon Microprocessors”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2201-2204. 
[n]	W. Roberts and B. Aikens, “A 256 Channel Digital Filter for a Data Acquisition System”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1455-1458. 
[n]	J. Yue, J. S. Cao, L. Ma, Y. F. Sui, L. Wang, and X. Y. Zhao, “Longitudinal and Transverse Feedback Systems for the BEPCII Storage Rings”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper TUPC09, pp. 373-375. 
[n]	D. R. Pearce and J. S. Vincent, “A Facility for Radioisotope Production at TRIUMF with 70-110 MeV Protons”, in Proc. Cyclotrons'92, Vancouver, Canada, Jul. 1992, paper V-03, pp. 209-212. 
[n]	C. Meng, X. He, S. Pei, S. C. Wang, O. Xiao, and Z. S. Zhou, “Optimization of Klystron Efficiency with MOGA”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2419-2421. doi:10.18429/JACoW-IPAC2018-WEPMF030
[n]	C. Moore and H. Jostlein, “A Laser Alignment System for Low Beta Quadrupoles”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 631-634. 
[n]	M. Justus et al., “Upgrade of the Machine Interlock System for the ELBE Accelerator Facility”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 469-471. doi:10.18429/JACoW-IPAC2014-MOPME044
[n]	P. Kwok et al., “Progress on Plasma Lens Experiments at the Final Focus Test Beam”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TAA28, pp. 2135-2137. 
[n]	A. Zaltsman et al., “Progress in the Development of High Level RF for the SNS Ring”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPAB007, pp. 1195-1197. 
[n]	L. Tchelidze and J. Stovall, “Beam Loss Limits in High Power Proton Linear Accelerators”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPWO075, pp. 3930-3932. 
[n]	R. Kramert et al., “Dynamic Alignment at SLS”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP4A17, pp. 693-695. 
[n]	L. R. Doolittle, C. Hovater, L. Merminga, J. Musson, and M. Wissmann, “A Low-Cost, NIST-Traceable, High Performance Dielectric Resonator Master Oscillator”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper MOP47, pp. 768-770. 
[n]	C. Ekdahl et al., “Electron Beam Dynamics in the Long-pulse, High-current DARHT-II Linear Induction Accelerator”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUOBG03, pp. 968-970. 
[n]	M. Jarosz, A. Jansson, J. C. Kazantzidis, T. J. Shea, and L. Tchelidze, “ESS Cold LINAC BLM Locations Determination”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1039-1041. doi:10.18429/JACoW-IPAC2015-MOPTY047
[n]	G. V. Stupakov et al., “Direct Measurement of Geometric Wakefields from Tapered Rectangular Collimators”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper MOA09, pp. 56-58. 
[n]	P. A. P. Nghiem, N. Chauvin, N. Pichoff, D. Uriot, and M. Valette, “Core-Halo Limit as an Indicator of High Intensity Beam Internal Dynamics”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 86-88. doi:10.18429/JACoW-IPAC2015-MOPWA006
[n]	S. A. Antipov, K. Carlson, A. Valishev, S. J. Wesseln, and R. Castellotti, “Design of Octupole Channel for Integrable Optics Test Accelerator”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1731-1733. doi:10.18429/JACoW-IPAC2016-TUPOR030
[n]	W. Chou, “Emittance Growth in a Storage Ring Due to Ground Motion”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 906-909. 
[n]	M. Gross et al., “Upgrades of the Experimental Setup for Electron Beam Self-modulation Studies at PITZ”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2548-2550. doi:10.18429/JACoW-IPAC2016-WEPMY005
[n]	W. Zhang, I. Marneris, and J. Sandberg, “Analysis and Simulation of Main Magnet Transmission Line Effect”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper MOPAS105, pp. 673-675. 
[n]	D. Betz et al., “Plasma Lenses for SLAC Final Focus Test Facility”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 619-622. 
[n]	A.Bogomyagkov, “IR design for Super-ct-factory”, in Proc. Factories'08, Novosibirsk, Russia, Apr. 2008, paper WEACH10, pp. XX-XX. 
[n]	V. Conforti et al., “Procedures of Software Integration Test and Release for ASTRI SST-2m Prototype Proposed for the Cherenkov Telescope Array”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 370-374. doi:10.18429/JACoW-ICALEPCS2017-TUPHA004
[n]	M. Pasini and R. E. Laxdal, “An Isopath Achromatic Bending Section for Multi-charge Ion Beam Transport at ISAC-II”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper WEPLE073, pp. 1175-1177. 
[n]	T. Baer, R. Tomas, J. Tuckmantel, J. Wenninger, F. Zimmermann, and R. Calaga, “LHC Machine Protection against Very Fast Crab Cavity Failures”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPZ009, pp. 1816-1818. 
[n]	D. Jacquet, R. Gorbonosov, and G. Kruk, “LSA - the High Level Application Software of the LHC - and Its Performance During the First Three Years of Operation”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper THPPC058, pp. 1201-1204. 
[n]	S. Pei and O. Xiao, “Studies on An S-band Bunching System with Hybrid Buncher”, in Proc. IPAC'13, Shanghai, China, May 2013, paper TUODB101, pp. 1120-1122. 
[n]	V. Karpenko, P. A. Seidl, R. M. Franks, and S. M. Lund, “An Engineering Overview of an Electrostatic Quadrupole Lattice for a High Current Transport Experiment”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPAH103, pp. 1447-1449. 
[n]	S. C. Wang, D. D. Dong, S. Fukuda, G. Pei, O. Xiao, and Z. S. Zhou, “Design Study of Collector for CEPC 650 MHz Klystron”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 540-542. doi:10.18429/JACoW-IPAC2016-MOPMY013
[n]	T. E. Plawski, R. Bachimanchi, C. Hovater, and J. Musson, “The CEBAF Master Oscillator and Distribution Remodeling”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH6REP100, pp. 4186-4188. 
[n]	R. Cappi et al., “The CERN PS Complex as Part of the LHC Injector Chain”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 171-174. 
[n]	S. Cheban, D. Passarelli, and V. Roger, “Design and Manufacturing Challenges of the SSR1 Current Leads for PIP-II”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 329-331. doi:10.18429/JACoW-SRF2019-MOP101
[n]	S. M. Ben Abdillah, R. Roux, and A. Bechtold, “Realization of a Faraday cup for the gun of PERLE”, in Proc. IBIC'25, Liverpool, UK, Sep. 2025, pp. 268-271. doi:10.18429/JACoW-IBIC2025-MOPMO36
[n]	B. Hanna and C. Crawford, “Construction of a New Tevatron Collider Beam Abort Dump”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 970-973. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search