Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] R. Wanzenberg, L. Bellantoni, H. Edwards, and M. McAshan, “Design and Measurements of a Deflecting Mode Cavity for an RF Separator”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MPPH129, pp. 1077-1079.
[n] J. Wernsmann and F. Lemery, “Development and laboratory validation of a precise alignment setup for beam-based THz radiation generation at the STERN experimental area of the European XFEL”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper THPB012, unpublished.
[n] D. C. Weisser, “Laboratory Report, Department of Nuclear Physics, Australian National Laboratory”, in Proc. SRF'93, Newport News, VA, USA, Oct. 1993, paper SRF93A03, pp. XX-XX.
[n] F. Lin, Y. Cai, V. S. Morozov, Y. M. Nosochkov, and Y. Zhang, “Update on the JLEIC Electron Collider Ring Design”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2780-2782. doi:10.18429/JACoW-IPAC2019-WEPGW121
[n] D. Newsham, Y. Luo, D. Yu, J. Zeng, and J. B. Rosenzweig, “Development of an X-Band PWT Photoinjector”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPAH088, pp. 2296-2298.
[n] K. R. Chu, S. Kuechler, Y. C. Tsai, and E. Weihreter, “Optimization and Experimental Characterization of a Broadband Circular Waveguide to Coaxial Transition”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP09C, pp. 1826-1828.
[n] J. L. Abelleira, W. Bartmann, J. Borburgh, E. Bravin, and U. Raich, “Progress in the Upgrade of the CERN PS Booster Recombination”, in Proc. HB'14, East Lansing, MI, USA, Nov. 2014, paper MOPAB02, pp. 24-28.
[n] K. Skoufaris, C. M. Garcia Jaimes, and R. Tomas, “Interplay between sextupole settings and single particle instabilities during the FCC-ee commissioning”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper MOPM028, unpublished.
[n] A. Rauchas and R. Zolecki, “Injected Beam Chopper System for the Intense Pulsed Neutron Source Accelerator System”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2947-2950.
[n] T. Y. Chung, C.-H. Chang, A. Y. Chen, Y. W. Chen, J. C. Huang, and J. C. Jan, “Radiation Damage to Undulator Electronics at an Electron Accelerator”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 4285-4287. doi:10.18429/JACoW-IPAC2019-THPTS073
[n] S. Bai et al., “Beam-Gas and Beam-Thermal Photon Scattering in CEPC”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 626-629. doi:10.18429/JACoW-IPAC2019-MOPRB024
[n] C. Goffing et al., “Experimental validation of parallel quadrupole beam-based alignment at KARA”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper WEPM111, unpublished.
[n] I. Agapov, T. Charles, and E. Musa, “Orbit-response based optics corrections for FCC-ee”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3143-3146. doi:10.18429/JACoW-IPAC2023-WEPL017
[n] B. Steffen, J. Wernsmann, K. Floettmann, and F. Lemery, “Design, fabrication, and characterization of 3D-printed photonic crystals for THz filtering applications in particle accelerator”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper THPB011, unpublished.
For LaTeX
Use Complete Form
For BibTeX
References
- R. Wanzenberg, L. Bellantoni, H. Edwards, and M. McAshan, “Design and Measurements of a Deflecting Mode Cavity for an RF Separator”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper MPPH129, pp. 1077-1079.
- J. Wernsmann and F. Lemery, “Development and laboratory validation of a precise alignment setup for beam-based THz radiation generation at the STERN experimental area of the European XFEL”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper THPB012, this conference.
- D. C. Weisser, “Laboratory Report, Department of Nuclear Physics, Australian National Laboratory”, in Proc. 6th Int. Conf. RF Superconductivity (SRF'93), Newport News, VA, USA, Oct. 1993, paper SRF93A03, pp. XX-XX.
- F. Lin, Y. Cai, V. S. Morozov, Y. M. Nosochkov, and Y. Zhang, “Update on the JLEIC Electron Collider Ring Design”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2780-2782.
- D. Newsham, Y. Luo, D. Yu, J. Zeng, and J. B. Rosenzweig, “Development of an X-Band PWT Photoinjector”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPAH088, pp. 2296-2298.
- K. R. Chu, S. Kuechler, Y. C. Tsai, and E. Weihreter, “Optimization and Experimental Characterization of a Broadband Circular Waveguide to Coaxial Transition”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper TUP09C, pp. 1826-1828.
- J. L. Abelleira, W. Bartmann, J. Borburgh, E. Bravin, and U. Raich, “Progress in the Upgrade of the CERN PS Booster Recombination”, in Proc. 54th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'14), East Lansing, MI, USA, Nov. 2014, paper MOPAB02, pp. 24-28.
- K. Skoufaris, C. M. Garcia Jaimes, and R. Tomas, “Interplay between sextupole settings and single particle instabilities during the FCC-ee commissioning”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper MOPM028, this conference.
- A. Rauchas and R. Zolecki, “Injected Beam Chopper System for the Intense Pulsed Neutron Source Accelerator System”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2947-2950.
- T. Y. Chung, C.-H. Chang, A. Y. Chen, Y. W. Chen, J. C. Huang, and J. C. Jan, “Radiation Damage to Undulator Electronics at an Electron Accelerator”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 4285-4287.
- S. Bai et al., “Beam-Gas and Beam-Thermal Photon Scattering in CEPC”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 626-629.
- C. Goffing et al., “Experimental validation of parallel quadrupole beam-based alignment at KARA”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper WEPM111, this conference.
- I. Agapov, T. Charles, and E. Musa, “Orbit-response based optics corrections for FCC-ee”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPL017, pp. 3143-3146.
- B. Steffen, J. Wernsmann, K. Floettmann, and F. Lemery, “Design, fabrication, and characterization of 3D-printed photonic crystals for THz filtering applications in particle accelerator”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper THPB011, this conference.
Back to search