Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] M. Ha, S. H. Han, H. Jeong, S. H. Nam, H. Suh, and M. Yoon, “Magnet Power Supplies of PLS 2 GeV Storage Ring”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP104G, pp. 2361-2363.
[n] C. Kuhn, J. Bahrdt, A. Gaupp, M. Scheer, and B. Schulz, “Developing of Advanced Magnet Structures for Cryogenic in Vacuum Permanent Magnet Undulators”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2004-2006. doi:10.18429/JACoW-IPAC2014-WEPRO029
[n] A. Topaloudis and C. Rachex, “Visualisation of Real-Time Front-End Software Architecture (FESA) Developments at CERN”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1853-1856. doi:10.18429/JACoW-ICALEPCS2017-THPHA180
[n] A. S. Alexandrova et al., “Optical Beam Loss Monitors Based on Fibres for the CLARA Phase 1 Beam-Line”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4869-4872. doi:10.18429/JACoW-IPAC2018-THPML090
[n] C. Goffing, J. Keintzel, A.-S. Mueller, M. Reissig, and F. Zimmermann, “Beam-based alignment techniques for the FCC-ee”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper MOPM109, unpublished.
[n] I. S. Guk et al., “Beam Injection in Recirculator SALO”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPPE050, pp. 3109-3110.
[n] C. Boffo, D. Connolly, L. Elementi, and Y. Tereshkin, “Control System for the BCP Processing Facility at FNAL”, in Proc. SRF'03, Lübeck, Germany, Sep. 2003, paper TUP04, pp. 278-281.
[n] V. Kamerdzhiev et al., “Beam Instrumentation for the COSY Electron Cooler”, in Proc. IBIC'12, Tsukuba, Japan, Oct. 2012, paper TUPB48, pp. 468-470.
[n] F. D. Dziuba et al., “Measurements on the Superconducting 217 MHz CH Cavity During the Manufacturing Phase”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper TUPB075, pp. 757-759.
[n] D. Castronovo, A. Fabris, C. Pasotti, P. Pittana, and M. Svandrlik, “Design of a 3rd Harmonic Superconducting Cavity for Bunch Lengthening in ELETTRA”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP16C, pp. 1879-1881.
[n] P.-C. Chiu, Y.-S. Cheng, K.-T. Hsu, C.-H. Huang, and C. Wu, “TLS orbit feedback upgrade”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4798-4801. doi:10.18429/JACoW-IPAC2023-THPL141
[n] V. Toivanen, P. Jardin, L. Maunoury, and C. Michel, “Redesign of the GANIL GTS ECRIS for 1+/n+ Studies”, in Proc. ECRIS'18, Catania, Italy, Sep. 2018, pp. 39-43. doi:10.18429/JACoW-ECRIS2018-MOC6
[n] N. Delerue, D. Auguste, J. Bonis, F. Gauthier, S. Jenzer, and A. M. Moutardier, “Tests of a 3D Printed BPM with a Stretched Wire and with a Particle Beam”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 4368-4371. doi:10.18429/JACoW-IPAC2019-FRXXPLS1
[n] B. E. Schultz, F. Ames, S. B. Beale, M. Cavenaile, and C. R. J. Charles, “Status of the CANREB EBIS at TRIUMF”, presented at the EBIST2022, Whistler, BC, Canada, Jun. 2022, paper TH2WH02, unpublished.
[n] R. M. Zwaska, “The Sinuous Target”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2630-2632. doi:10.18429/JACoW-IPAC2015-WEPWA056
[n] F. Li et al., “Progress Towards X-ray Free-electron Laser Driven by Plasma Wakefield Accelerator at SXFEL”, presented at the FLS'23, Luzern, Switzerland, Aug.-Sep. 2023, paper TH4A1, unpublished.
[n] G. Guignard and C. Fischer, “Optimizing Energy Spread in the CLIC Main Linac”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 3231-3234.
[n] K. Beckert et al., “Efficient Collection and Cooling of Radioactive Ion Beams in a Collector Ring CR”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper MOP4B04, pp. 536-538.
[n] C. Chu et al., “Application Programming Structure and Physics Applications”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPPE015, pp. 2360-2362.
[n] T. P. Wangler, R. W. Garnett, W. P. Lysenko, and J. Qiang, “Challenge of Benchmarking Simulation Codes for the LANL Beam-Halo Experiment”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPPG011, pp. 2613-2615.
[n] K. Aulenbacher et al., “Results from the CLIC Test Facility”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper TUY01T, pp. 42-46.
[n] J. Rossbach, “New Linac Based Free Electron Laser Projects using Bright Electron Beams”, in Proc. LINAC'96, Geneva, Switzerland, Aug. 1996, paper TU103, pp. 275-282.
[n] R. D. Ryne, “Linac Beam Dynamics Codes: State of the Art and Perspectives”, in Proc. HB'08, Nashville, TN, USA, Aug. 2008, paper WGB03, pp. 194-194.
[n] F. Furuta, D. J. Bice, A. C. Crawford, R. L. Geng, T. Konomi, and K. Saito, “S0 Tight Loop Studies on ICHIRO 9-Cell Cavities”, in Proc. SRF'09, Berlin, Germany, Sep. 2009, paper THPPO082, pp. 814-817.
[n] M. Tobiyama and E. Kikutani, “Study of Bunch by Bunch Feedback System in TRISTAN-AR”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 4P063, pp. 2335-2337.
[n] S. K. Barber et al., “Quasi Nonlinear Plasma Wakefield Acceleration Experiments”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper TUPP110, pp. 680-682.
[n] G. A. Westenskow et al., “RTA Gun Performance”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TH4022, pp. 815-817.
[n] Y. C. Chae et al., “A 10-GeV, 5-MW Pulsed Proton Source for a Spallation Source and a Muon Collider”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper TUP003G, pp. 524-526.
[n] A. Wagner, “International Collaboration with High Energy Accelerators”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOXAMH01, pp. XX-XX.
[n] A. H. Lumpkin et al., “Spatial Resolution Limits of YAG:Ce Powder Beam-Profile Monitors at the Fermilab A0 Photoinjector”, in Proc. FEL'09, Liverpool, UK, Aug. 2009, paper TUPC46, pp. 348-351.
[n] B. Li and J. Qiang, “Suppression of Microbunching Instability Using a Quadrupole Inserted Chicane in Free-Electron-Laser Linacs”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4267-4270. doi:10.18429/JACoW-IPAC2018-THPMF082
[n] A. Neto et al., “MARTe Framework: a Middleware for Real-time Applications Development”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper THDAULT06, pp. 1277-1280.
[n] C. Montag, “RHIC Progress and Future”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR1PBI01, pp. 4216-4220.
[n] J. P. Lidestri, “A Synchrotron Design for Macromolecular Structure Determination”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPPH127, pp. 2772-2774.
[n] H. Wang, T. E. Plawski, and R. A. Rimmer, “Simulation Study Using an Injection Phase-locked Magnetron as an Alternative Source for SRF Accelerators”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3544-3547. doi:10.18429/JACoW-IPAC2015-WEPWI028
[n] P. Morton, “Free Electron Lasers”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 3125-3130.
[n] W. Schappert et al., “Adaptive Lorentz Force Detuning Compensation in the ILC S1-G Cryomodule at KEK”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper MOPO064, pp. 254-257.
[n] J. Keil and K. Balewski, “Correction of the Linear Optics at PETRA III”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPD085, pp. 4482-4484.
[n] B. D. Muratori, J. K. Jones, S. L. Smith, and S. I. Tzenov, “EMMA Diagnostic Line”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR5REP108, pp. 5026-5028.
[n] K. Fuchsberger et al., “Operational Experience during the LHC Injection Tests”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEC007, pp. 468-470.
[n] J. R. Chen, C. K. Kuan, K. Y. Kuo, and D. J. Wang, “The Mechanical Stability of the Electron Beam Position Monitor at the Taiwan Light Source”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP4B16, pp. 2429-2431.
[n] M. A. Fraser et al., “A Beam-based Measurement of the LHC Beam Dump Kicker Waveform”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3911-3913. doi:10.18429/JACoW-IPAC2016-THPOR052
[n] M. Liepe et al., “CW RF Systems of the Cornell ERL Injector”, in Proc. LINAC'08, Victoria, Canada, Sep.-Oct. 2008, paper THP034, pp. 857-859.
[n] M. Bossi, G. D'Auria, M. Ferianis, and C. Rossi, “An Improved Beam Position Monitor System for the ELETTRA Linac and Transfer Line”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper TUP088L, pp. 1722-1724.
[n] M. W. Bruker, K. Aulenbacher, J. Dietrich, S. Friederich, A. Hofmann, and T. Weilbach, “Operational Experience with the HESR Electron Cooler Test Set-up”, in Proc. COOL'13, Mürren, Switzerland, Jun. 2013, paper WEPPO03, pp. 100-102.
[n] T. Mastorides, J. D. Fox, C. H. Rivetta, D. Teytelman, and D. Van Winkle, “Analysis of the Longitudinal Low-order Mode Beam Dynamics in PEP-II Rings at High Current Beams”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper MOPAS062, pp. 575-577.
[n] L. Laurent, R. E. Kirby, and S. G. Tantawi, “SEM Field Emission Probe Surface Science Study”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPC043, pp. 1096-1098.
[n] Y. D. Ding, Z. J. Ma, Q. B. Wang, M. Y. Yan, and Q. J. Zhang, “HPGe Detector Application on Monitoring Environmental Samples around the Accelerator”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2725-2728. doi:10.18429/JACoW-IPAC2016-WEPOR024
[n] A. Kalinin and S. Artinian, “Investigation of Precise Pipeline-Type ADCs in a Burst Regime for a Single-Shot BPM”, in Proc. DIPAC'09, Basel, Switzerland, May 2009, paper MOPD11, pp. 68-70.
For LaTeX
Use Complete Form
For BibTeX
References
- M. Ha, S. H. Han, H. Jeong, S. H. Nam, H. Suh, and M. Yoon, “Magnet Power Supplies of PLS 2 GeV Storage Ring”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper MOP104G, pp. 2361-2363.
- C. Kuhn, J. Bahrdt, A. Gaupp, M. Scheer, and B. Schulz, “Developing of Advanced Magnet Structures for Cryogenic in Vacuum Permanent Magnet Undulators”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2004-2006.
- A. Topaloudis and C. Rachex, “Visualisation of Real-Time Front-End Software Architecture (FESA) Developments at CERN”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1853-1856.
- A. S. Alexandrova et al., “Optical Beam Loss Monitors Based on Fibres for the CLARA Phase 1 Beam-Line”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4869-4872.
- C. Goffing, J. Keintzel, A.-S. Mueller, M. Reissig, and F. Zimmermann, “Beam-based alignment techniques for the FCC-ee”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper MOPM109, this conference.
- I. S. Guk et al., “Beam Injection in Recirculator SALO”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TPPE050, pp. 3109-3110.
- C. Boffo, D. Connolly, L. Elementi, and Y. Tereshkin, “Control System for the BCP Processing Facility at FNAL”, in Proc. 11th Workshop RF Superconductivity (SRF'03), Lübeck, Germany, Sep. 2003, paper TUP04, pp. 278-281.
- V. Kamerdzhiev et al., “Beam Instrumentation for the COSY Electron Cooler”, in Proc. 1st Int. Beam Instrumentation Conf. (IBIC'12), Tsukuba, Japan, Oct. 2012, paper TUPB48, pp. 468-470.
- F. D. Dziuba et al., “Measurements on the Superconducting 217 MHz CH Cavity During the Manufacturing Phase”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper TUPB075, pp. 757-759.
- D. Castronovo, A. Fabris, C. Pasotti, P. Pittana, and M. Svandrlik, “Design of a 3rd Harmonic Superconducting Cavity for Bunch Lengthening in ELETTRA”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper TUP16C, pp. 1879-1881.
- P.-C. Chiu, Y.-S. Cheng, K.-T. Hsu, C.-H. Huang, and C. Wu, “TLS orbit feedback upgrade”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPL141, pp. 4798-4801.
- V. Toivanen, P. Jardin, L. Maunoury, and C. Michel, “Redesign of the GANIL GTS ECRIS for 1+/n+ Studies”, in Proc. 23th International Workshop on ECR Ion Sources (ECRIS'18), Catania, Italy, Sep. 2018, pp. 39-43.
- N. Delerue, D. Auguste, J. Bonis, F. Gauthier, S. Jenzer, and A. M. Moutardier, “Tests of a 3D Printed BPM with a Stretched Wire and with a Particle Beam”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 4368-4371.
- B. E. Schultz, F. Ames, S. B. Beale, M. Cavenaile, and C. R. J. Charles, “Status of the CANREB EBIS at TRIUMF”, presented at the 14th International Symposium of EBIS/T (EBIST2022), Whistler, BC, Canada, Jun. 2022, paper TH2WH02, unpublished.
- R. M. Zwaska, “The Sinuous Target”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2630-2632.
- F. Li et al., “Progress Towards X-ray Free-electron Laser Driven by Plasma Wakefield Accelerator at SXFEL”, presented at the 67th ICFA Advanced Beam Dynamics Workshop on Future Light Sources (FLS'23), Luzern, Switzerland, Aug.-Sep. 2023, paper TH4A1, unpublished.
- G. Guignard and C. Fischer, “Optimizing Energy Spread in the CLIC Main Linac”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 3231-3234.
- K. Beckert et al., “Efficient Collection and Cooling of Radioactive Ion Beams in a Collector Ring CR”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper MOP4B04, pp. 536-538.
- C. Chu et al., “Application Programming Structure and Physics Applications”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPPE015, pp. 2360-2362.
- T. P. Wangler, R. W. Garnett, W. P. Lysenko, and J. Qiang, “Challenge of Benchmarking Simulation Codes for the LANL Beam-Halo Experiment”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPPG011, pp. 2613-2615.
- K. Aulenbacher et al., “Results from the CLIC Test Facility”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper TUY01T, pp. 42-46.
- J. Rossbach, “New Linac Based Free Electron Laser Projects using Bright Electron Beams”, in Proc. 18th Int. Linear Accelerator Conf. (LINAC'96), Geneva, Switzerland, Aug. 1996, paper TU103, pp. 275-282.
- R. D. Ryne, “Linac Beam Dynamics Codes: State of the Art and Perspectives”, in Proc. 42nd ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'08), Nashville, TN, USA, Aug. 2008, paper WGB03, pp. 194-194.
- F. Furuta, D. J. Bice, A. C. Crawford, R. L. Geng, T. Konomi, and K. Saito, “S0 Tight Loop Studies on ICHIRO 9-Cell Cavities”, in Proc. 14th Int. Conf. RF Superconductivity (SRF'09), Berlin, Germany, Sep. 2009, paper THPPO082, pp. 814-817.
- M. Tobiyama and E. Kikutani, “Study of Bunch by Bunch Feedback System in TRISTAN-AR”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 4P063, pp. 2335-2337.
- S. K. Barber et al., “Quasi Nonlinear Plasma Wakefield Acceleration Experiments”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper TUPP110, pp. 680-682.
- G. A. Westenskow et al., “RTA Gun Performance”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper TH4022, pp. 815-817.
- Y. C. Chae et al., “A 10-GeV, 5-MW Pulsed Proton Source for a Spallation Source and a Muon Collider”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper TUP003G, pp. 524-526.
- A. Wagner, “International Collaboration with High Energy Accelerators”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOXAMH01, pp. XX-XX.
- A. H. Lumpkin et al., “Spatial Resolution Limits of YAG:Ce Powder Beam-Profile Monitors at the Fermilab A0 Photoinjector”, in Proc. 31st Int. Free Electron Laser Conf. (FEL'09), Liverpool, UK, Aug. 2009, paper TUPC46, pp. 348-351.
- B. Li and J. Qiang, “Suppression of Microbunching Instability Using a Quadrupole Inserted Chicane in Free-Electron-Laser Linacs”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4267-4270.
- A. Neto et al., “MARTe Framework: a Middleware for Real-time Applications Development”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper THDAULT06, pp. 1277-1280.
- C. Montag, “RHIC Progress and Future”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper FR1PBI01, pp. 4216-4220.
- J. P. Lidestri, “A Synchrotron Design for Macromolecular Structure Determination”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPPH127, pp. 2772-2774.
- H. Wang, T. E. Plawski, and R. A. Rimmer, “Simulation Study Using an Injection Phase-locked Magnetron as an Alternative Source for SRF Accelerators”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3544-3547.
- P. Morton, “Free Electron Lasers”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 3125-3130.
- W. Schappert et al., “Adaptive Lorentz Force Detuning Compensation in the ILC S1-G Cryomodule at KEK”, in Proc. 15th Int. Conf. RF Superconductivity (SRF'11), Chicago, IL, USA, Jul. 2011, paper MOPO064, pp. 254-257.
- J. Keil and K. Balewski, “Correction of the Linear Optics at PETRA III”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPD085, pp. 4482-4484.
- B. D. Muratori, J. K. Jones, S. L. Smith, and S. I. Tzenov, “EMMA Diagnostic Line”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper FR5REP108, pp. 5026-5028.
- K. Fuchsberger et al., “Operational Experience during the LHC Injection Tests”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPEC007, pp. 468-470.
- J. R. Chen, C. K. Kuan, K. Y. Kuo, and D. J. Wang, “The Mechanical Stability of the Electron Beam Position Monitor at the Taiwan Light Source”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper THP4B16, pp. 2429-2431.
- M. A. Fraser et al., “A Beam-based Measurement of the LHC Beam Dump Kicker Waveform”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3911-3913.
- M. Liepe et al., “CW RF Systems of the Cornell ERL Injector”, in Proc. 24th Linear Accelerator Conf. (LINAC'08), Victoria, Canada, Sep.-Oct. 2008, paper THP034, pp. 857-859.
- M. Bossi, G. D'Auria, M. Ferianis, and C. Rossi, “An Improved Beam Position Monitor System for the ELETTRA Linac and Transfer Line”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper TUP088L, pp. 1722-1724.
- M. W. Bruker, K. Aulenbacher, J. Dietrich, S. Friederich, A. Hofmann, and T. Weilbach, “Operational Experience with the HESR Electron Cooler Test Set-up”, in Proc. 9th Workshop on Beam Cooling and Related Topics (COOL'13), Mürren, Switzerland, Jun. 2013, paper WEPPO03, pp. 100-102.
- T. Mastorides, J. D. Fox, C. H. Rivetta, D. Teytelman, and D. Van Winkle, “Analysis of the Longitudinal Low-order Mode Beam Dynamics in PEP-II Rings at High Current Beams”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper MOPAS062, pp. 575-577.
- L. Laurent, R. E. Kirby, and S. G. Tantawi, “SEM Field Emission Probe Surface Science Study”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPC043, pp. 1096-1098.
- Y. D. Ding, Z. J. Ma, Q. B. Wang, M. Y. Yan, and Q. J. Zhang, “HPGe Detector Application on Monitoring Environmental Samples around the Accelerator”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2725-2728.
- A. Kalinin and S. Artinian, “Investigation of Precise Pipeline-Type ADCs in a Burst Regime for a Single-Shot BPM”, in Proc. 9th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'09), Basel, Switzerland, May 2009, paper MOPD11, pp. 68-70.
Back to search