Favourites
For Word
[n] J. Juanhuix and M. Traveria, “Magnetic Design and light characteristics of the LLS Undulators”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOP23G, pp. 2252-2254.
[n] M. G. Gu, R. Chen, Z. H. Chen, B. Liu, and L. Ouyang, “Eddy Current Septum Magnets for Booster Injection and Extraction and Storage Ring Injection at SSRF”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPC078, pp. 2177-2179.
[n] W. R. Smythe, “Reducing Ferrite Tuner Power Loss by Bias Field Rotation”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2173-2176.
[n] K. Takayama et al., “Induction Acceleration of a Single RF Bunch in the KEK PS”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper FPAE020, pp. 1679-1681.
[n] E. A. Nanni et al., “Prototyping High-Gradient mm-Wave Accelerating Structures”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2902-2905. doi:10.18429/JACoW-IPAC2017-WEPAB138
[n] S. Yadav, A. C. Holikatti, C. P. Navathe, A. Ojha, T. A. Puntambekar, and Y. Tyagi, “Development of the System for Longitudinal Coupled Bunch Modes Measurement at Indus-2”, in Proc. IBIC'12, Tsukuba, Japan, Oct. 2012, paper MOPA38, pp. 146-149.
[n] W. R. Huang et al., “Demonstration of an All-Optically Driven Sub-keV THz Gun”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 503-505. doi:10.18429/JACoW-IPAC2017-MOPIK004
[n] M. Kwiatkowski, M. Alsdorf, B. Dehning, W. Vigano, and C. Zamantzas, “A Real-Time FPGA Based Algorithm for the Combination of Beam Loss Acquisition Methods used for Measurement Dynamic Range Expansion”, in Proc. IBIC'12, Tsukuba, Japan, Oct. 2012, paper TUPA31, pp. 419-423.
[n] E. Bondarchuk et al., “Normal Conducting QM Quadrupole for the HERA Luminosity Upgrade”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP50C, pp. 1972-1974.
[n] F. Havart, D. Chapuis, R. Nunes, and D. Vaxelaire, “Achieving a Highly Configurable Personnel Protection System for Experimental Areas”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOPPC061, pp. 238-241.
[n] J. M. Allen, G. Travish, H. Gong, and R. B. Yoder, “Progress on a Laser-driven Dielectric Structure for Use as a Short-period Undulator”, in Proc. FEL'12, Nara, Japan, Aug. 2012, paper THPD43, pp. 630-633.
[n] V. Nadot, A. Gaget, F. Gohier, F. Gougnaud, P. Lotrus, and S. Tzvetkov, “vscode-epics, a VSCode Module to Enlighten Your EPICS Code”, in Proc. ICALEPCS'21, Shanghai, China, Oct. 2021, pp. 179-180. doi:10.18429/JACoW-ICALEPCS2021-MOPV024
[n] E. I. Simakov et al., “Results of the New High Power Tests of Superconducting Photonic Band Gap Structure Cells”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper WEPAC33, pp. 850-852.
[n] L. K. Jensen et al., “Software Architecture for the LHC Beam-based Feedback System at CERN”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper THPPC119, pp. 1337-1340.
[n] R. Andersson, E. Bargall??, and A. Nordt, “Development of an Analysis Framework for the Beam Instrumentation Interface to the Beam Interlock System at ESS”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 4185-4188. doi:10.18429/JACoW-IPAC2016-THPOY039
[n] N. Yu. Kazarinov, T. Adam, I. A. Ivanenko, F. R. Osswald, and E. K. Traykov, “Simulation of Beam Extraction from TR24 Cyclotron at IPHC”, in Proc. Cyclotrons'19, Cape Town, South Africa, Sep. 2019, pp. 76-79. doi:10.18429/JACoW-CYCLOTRONS2019-MOP021
[n] G. Toby et al., “Multipacting analysis of the SNS drift tube linac (DTL) RF vacuum window using Spark3d”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2962-2965. doi:10.18429/JACoW-IPAC2023-WEPA127
[n] M. Tajima, T. Koseki, T. Nakaya, and T. Toyama, “Development of 16 Electrodes Beam-size Monitors for J-PARC MR”, in Proc. IBIC'19, Malmö, Sweden, Sep. 2019, pp. 347-350. doi:10.18429/JACoW-IBIC2019-TUPP021
[n] R. Benaroya and R. J. Dortwegt, “Vacuum Chamber of the Injector Synchrotron for the Advanced Photon Source”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2275-2278.
[n] K. Cerff, D. Haas, J. Jakel, and M. Schmitt, “Setup and Diagnostics of Motion Control at ANKA Beamlines”, in Proc. PCaPAC'14, Karlsruhe, Germany, Oct. 2014, paper FPO018, pp. 198-200.
[n] S. Kersten et al., “Detector Control System of the ATLAS Insertable B-Layer”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper MOPMS021, pp. 364-367.
[n] R. Sobbia, S. Dementjevs, S. Joray, and M. Wohlmuther, “Thermo-mechanical Investigations of the SINQ Cannelloni" Target"”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPFI065, pp. 3445-3447.
[n] D. Sertore et al., “Recent Update on ESS Medium Beta Cavities at INFN LASA”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 1245-1248. doi:10.18429/JACoW-IPAC2022-TUPOTK021
[n] A. C. Araujo Martinez, A. Moro, A. Aleksandrov, A. Smirnov, R. Agustsson, and S. Kutsaev, “Test results of an improved multi-dimensional Bunch Shape Monitor”, presented at the LINAC'24, Chicago, IL, USA, Aug. 2024, paper TUPB102, unpublished.
[n] A. A. Khan and C. A. Preissner, “Bringing the Ground Up (When Is Two Less Than One?)”, in Proc. MEDSI'20, Chicago, USA, Jul. 2021, pp. 182. doi:10.18429/JACoW-MEDSI2020-TUPC02
[n] Y. Jiang, M. Gai, J. Hirshfield, M. Palmer, and S. Shchelkunov, “Novel deuteron accelerator for nuclear waste transmutation”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper TUPS059, unpublished.
[n] V. A. Andreev et al., “Development of RFQ Accelerator for the MMF Linac”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 3109-3111.
[n] S.-W. Lee, C. Barbier, Y. Kang, A. Menshov, and J. Moss, “Design and fabrication of the waveguide Iris couplers for the Spallation Neutron Source drift tube linac”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 873-875. doi:10.18429/JACoW-IPAC2023-MOPL140
[n] R. Andersson, E. Bargall??, A. Nordt, and E. Adli, “Machine Protection Systems and their Impact on Beam Availability and Accelerator Reliability”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1029-1032. doi:10.18429/JACoW-IPAC2015-MOPTY044
[n] C. Tennant et al., “Superconducting Radio-Frequency Cavity Fault Classification Using Machine Learning at Jefferson Laboratory”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 4535-4539. doi:10.18429/JACoW-IPAC2021-FRXC01
[n] B. Gao, H. J. Chen, J. Chen, Y. B. Leng, and K. R. Ye, “Beam Size Monitor Based on Multi-Silt Interferometer at SSRF”, in Proc. IBIC'17, Grand Rapids, MI, USA, Aug. 2017, pp. 408-410. doi:10.18429/JACoW-IBIC2017-WEPCC21
[n] M. Giovannozzi, F. Franchi, and M. George, “First Results of Space Charge Simulations for the Novel Multi-turn Injection”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPE081, pp. 4710-4712.
For LaTeX
Use Complete Form
For BibTeX
References
- J. Juanhuix and M. Traveria, “Magnetic Design and light characteristics of the LLS Undulators”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper MOP23G, pp. 2252-2254.
- M. G. Gu, R. Chen, Z. H. Chen, B. Liu, and L. Ouyang, “Eddy Current Septum Magnets for Booster Injection and Extraction and Storage Ring Injection at SSRF”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPC078, pp. 2177-2179.
- W. R. Smythe, “Reducing Ferrite Tuner Power Loss by Bias Field Rotation”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2173-2176.
- K. Takayama et al., “Induction Acceleration of a Single RF Bunch in the KEK PS”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper FPAE020, pp. 1679-1681.
- E. A. Nanni et al., “Prototyping High-Gradient mm-Wave Accelerating Structures”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 2902-2905.
- S. Yadav, A. C. Holikatti, C. P. Navathe, A. Ojha, T. A. Puntambekar, and Y. Tyagi, “Development of the System for Longitudinal Coupled Bunch Modes Measurement at Indus-2”, in Proc. 1st Int. Beam Instrumentation Conf. (IBIC'12), Tsukuba, Japan, Oct. 2012, paper MOPA38, pp. 146-149.
- W. R. Huang et al., “Demonstration of an All-Optically Driven Sub-keV THz Gun”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 503-505.
- M. Kwiatkowski, M. Alsdorf, B. Dehning, W. Vigano, and C. Zamantzas, “A Real-Time FPGA Based Algorithm for the Combination of Beam Loss Acquisition Methods used for Measurement Dynamic Range Expansion”, in Proc. 1st Int. Beam Instrumentation Conf. (IBIC'12), Tsukuba, Japan, Oct. 2012, paper TUPA31, pp. 419-423.
- E. Bondarchuk et al., “Normal Conducting QM Quadrupole for the HERA Luminosity Upgrade”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper TUP50C, pp. 1972-1974.
- F. Havart, D. Chapuis, R. Nunes, and D. Vaxelaire, “Achieving a Highly Configurable Personnel Protection System for Experimental Areas”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper MOPPC061, pp. 238-241.
- J. M. Allen, G. Travish, H. Gong, and R. B. Yoder, “Progress on a Laser-driven Dielectric Structure for Use as a Short-period Undulator”, in Proc. 34th Int. Free Electron Laser Conf. (FEL'12), Nara, Japan, Aug. 2012, paper THPD43, pp. 630-633.
- V. Nadot, A. Gaget, F. Gohier, F. Gougnaud, P. Lotrus, and S. Tzvetkov, “vscode-epics, a VSCode Module to Enlighten Your EPICS Code”, in Proc. 18th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'21), Shanghai, China, Oct. 2021, pp. 179-180.
- E. I. Simakov et al., “Results of the New High Power Tests of Superconducting Photonic Band Gap Structure Cells”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper WEPAC33, pp. 850-852.
- L. K. Jensen et al., “Software Architecture for the LHC Beam-based Feedback System at CERN”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper THPPC119, pp. 1337-1340.
- R. Andersson, E. Bargall??, and A. Nordt, “Development of an Analysis Framework for the Beam Instrumentation Interface to the Beam Interlock System at ESS”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 4185-4188.
- N. Yu. Kazarinov, T. Adam, I. A. Ivanenko, F. R. Osswald, and E. K. Traykov, “Simulation of Beam Extraction from TR24 Cyclotron at IPHC”, in Proc. 22nd Int. Conf. on Cyclotrons and their Applications (Cyclotrons'19), Cape Town, South Africa, Sep. 2019, pp. 76-79.
- G. Toby et al., “Multipacting analysis of the SNS drift tube linac (DTL) RF vacuum window using Spark3d”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPA127, pp. 2962-2965.
- M. Tajima, T. Koseki, T. Nakaya, and T. Toyama, “Development of 16 Electrodes Beam-size Monitors for J-PARC MR”, in Proc. 8th Int. Beam Instrumentation Conf. (IBIC'19), Malmö, Sweden, Sep. 2019, pp. 347-350.
- R. Benaroya and R. J. Dortwegt, “Vacuum Chamber of the Injector Synchrotron for the Advanced Photon Source”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2275-2278.
- K. Cerff, D. Haas, J. Jakel, and M. Schmitt, “Setup and Diagnostics of Motion Control at ANKA Beamlines”, in Proc. 10th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'14), Karlsruhe, Germany, Oct. 2014, paper FPO018, pp. 198-200.
- S. Kersten et al., “Detector Control System of the ATLAS Insertable B-Layer”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper MOPMS021, pp. 364-367.
- R. Sobbia, S. Dementjevs, S. Joray, and M. Wohlmuther, “Thermo-mechanical Investigations of the SINQ Cannelloni" Target"”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPFI065, pp. 3445-3447.
- D. Sertore et al., “Recent Update on ESS Medium Beta Cavities at INFN LASA”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 1245-1248.
- A. C. Araujo Martinez, A. Moro, A. Aleksandrov, A. Smirnov, R. Agustsson, and S. Kutsaev, “Test results of an improved multi-dimensional Bunch Shape Monitor”, presented at the 32nd Linear Accelerator Conf. (LINAC'24), Chicago, IL, USA, Aug. 2024, paper TUPB102, unpublished.
- A. A. Khan and C. A. Preissner, “Bringing the Ground Up (When Is Two Less Than One?)”, in Proc. 11th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'20), Chicago, USA, Jul. 2021, pp. 182.
- Y. Jiang, M. Gai, J. Hirshfield, M. Palmer, and S. Shchelkunov, “Novel deuteron accelerator for nuclear waste transmutation”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper TUPS059, this conference.
- V. A. Andreev et al., “Development of RFQ Accelerator for the MMF Linac”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 3109-3111.
- S.-W. Lee, C. Barbier, Y. Kang, A. Menshov, and J. Moss, “Design and fabrication of the waveguide Iris couplers for the Spallation Neutron Source drift tube linac”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPL140, pp. 873-875.
- R. Andersson, E. Bargall??, A. Nordt, and E. Adli, “Machine Protection Systems and their Impact on Beam Availability and Accelerator Reliability”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1029-1032.
- C. Tennant et al., “Superconducting Radio-Frequency Cavity Fault Classification Using Machine Learning at Jefferson Laboratory”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 4535-4539.
- B. Gao, H. J. Chen, J. Chen, Y. B. Leng, and K. R. Ye, “Beam Size Monitor Based on Multi-Silt Interferometer at SSRF”, in Proc. 6th Int. Beam Instrumentation Conf. (IBIC'17), Grand Rapids, MI, USA, Aug. 2017, pp. 408-410.
- M. Giovannozzi, F. Franchi, and M. George, “First Results of Space Charge Simulations for the Novel Multi-turn Injection”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPE081, pp. 4710-4712.
Back to search