Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] K. Endo, K. Irie, and F. Q. Zhang, “Feedback Control of 50 Hz Power Supply”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP080G, pp. 2343-2345.
[n] J. Boedewadt and N. Ekanayake, “Simulation of Optical Transport Beamlines for High-quality Optical Beams for Accelerator Applications”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1462-1465. doi:10.18429/JACoW-IPAC2015-TUPWA026
[n] V. Aleksandrov, A. A. Fateev, and A. Tuzikov, “The Nonsymmetrical Variant of the Nonferromagnetic Extraction Kicker Magnet of the NICA Booster”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 566-568. doi:10.18429/JACoW-RUPAC2016-THPSC013
[n] V. V. Bezuglov et al., “Magnetic Systems for Beam Transport at Extraction Channels of ILU Accelerators”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 556-558. doi:10.18429/JACoW-RUPAC2016-THPSC008
[n] W.-T. Weng et al., “Upgrading the SNS Compressor Ring to 3 MW”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper THPLE013, pp. 1070-1072.
[n] R. W. Shaw, R. Cutler, C. S. Feigerle, A. D. Herr, Y.-Y. Lee, and C. J. Liaw, “Thin Diamond Films for SNS H- Injection Stripping”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper ROPB004, pp. 617-619.
[n] F. Sannibale, “Luminosity Optimization in DANE”, in Proc. DIPAC'99, Chester, UK, May 1999, paper CT09, pp. XX-XX.
[n] J. Allard, O. Jonsson, F. Locci, and G. Mornacchi, “Rejuvenation of the Controls of the CERN ISOLDE Facility using Industrial Components”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper TUAP034, pp. XX-XX.
[n] L. Barbina et al., “The Design of the FERMI Personnel Access Control and Interlock System”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper TUP094L, pp. 1818-1820.
[n] M. Ferianis, “The ELETTRA Streak Camera: System Set-Up and First Results”, in Proc. DIPAC'99, Chester, UK, May 1999, paper CT07, pp. XX-XX.
[n] K. E. Hacker et al., “Echo Seeding Experiment at FLASH”, in Proc. FEL'11, Shanghai, China, Aug. 2011, paper TUPB10, pp. 279-282.
[n] G. Burtin, R. J. Colchester, G. Ferioli, J. J. Gras, R. Jung, and J. M. Vouillot Geneva, “Adaptive Optics for the LEP 2 Synchrotron Light Monitors”, in Proc. DIPAC'99, Chester, UK, May 1999, paper CT08, pp. XX-XX.
[n] D. Bulfone et al., “Exploitation of the Integrated Digital Processing and Analysis of the ELETTRA/SLS Transverse Multi-Bunch Feedback System”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPAH017, pp. 1267-1269.
[n] J. Altaber, F. Beck, M. C. Crowley-Milling, and R. Rausch, “Suggested Principles for the Control of Furture Accelerators”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3278-3281.
[n] K. E. Hacker et al., “Progress Towards HGHG and EEHG at FLASH”, in Proc. FEL'12, Nara, Japan, Aug. 2012, paper TUPD13, pp. 257-260.
[n] R. D?Âlling, “Determination of Radial Ion Beam Profile from the Energy Spectrum of Residual Gas Ions Accelerated in the Beam Potential”, in Proc. DIPAC'99, Chester, UK, May 1999, paper CT02, pp. XX-XX.
[n] K. E. Hacker et al., “Optical Replica Synthesizer to be Recommissioned with 270 nm Seed at FLASH”, in Proc. FEL'12, Nara, Japan, Aug. 2012, paper TUPD14, pp. 261-264.
[n] D. Bulfone et al., “First Commissioning Results of the ELETTRA Transverse Multi-Bunch Feedback”, in Proc. DIPAC'01, Grenoble, France, May 2001, paper CT02, pp. XX-XX.
[n] R. Auchettl, R. T. Dowd, and Y. E. Tan, “Beam Dynamics, Injection and Impedance Studies for the Proposed Single Pulsed Nonlinear Injection Kicker at the Australian Synchrotron”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1219-1222. doi:10.18429/JACoW-IPAC2019-TUZZPLS2
[n] T. Wijnands, C. Pignard, R. Rausch, and A. Tsoulou, “Radiation Constraints in the Design and Conception of LHC Control Systems”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper TU101, pp. XX-XX.
[n] P. Krejcik, “Nonlinear Beam Behaviour in the CERN Antiproton Collector”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 755-758.
[n] R. Bracco et al., “Construction and Testing of an Electromagnetic Elliptical Wiggler for ELETTRA”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOP31F, pp. 2255-2257.
[n] D. Bulfone, M. Lonza, P. Michelini, and L. Pasquali, “The Design of the Energy Ramping System for ELETTRA”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1809-1812.
[n] S. Khan et al., “Results from the Optical Replica Experiments at FLASH”, in Proc. FEL'08, Gyeongju, Korea, Aug. 2008, paper THBAU04, pp. 497-500.
[n] N. Ekanayake, S. Ackermann, C. Lechner, Th. Maltezopoulos, T. Plath, and K. E. Hacker, “Indirect Measurements of NIR and UV Ultrashort Seed Laser Pulses using a Transverse Deflecting RF-Structure”, in Proc. FEL'14, Basel, Switzerland, Aug. 2014, paper MOP094, pp. 272-274.
[n] J. Altaber and R. Rausch, “A Multiprocessor Bus Architecture for the LEP Control System”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2281-2284.
[n] L. Barbina et al., “Design and Development of a New Control System for the ELETTRA Linac”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper TUP093L, pp. 1815-1817.
[n] J. Altaber, M. C. Crowley-Milling, P. G. Innocenti, and R. Rausch, “Replacing Mini-Computers by Multi-Microprocessors for the LEP Control System”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2287-2290.
[n] P. van der Meulen et al., “Technical Aspects of the Integration of the Optical Replica Synthesizer for the Diagnostics of Ultra-short Bunches into FLASH at DESY”, in Proc. FEL'06, Berlin, Germany, Aug.-Sep. 2006, paper TUBAU05, pp. 296-299.
[n] R. Auchettl and R. T. Dowd, “Applications of Online Optimization Algorithms for Injection at the Australian Synchrotron”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3795-3798. doi:10.18429/JACoW-IPAC2019-THPRB001
[n] R. Auchettl, R. T. Dowd, and Y. E. Tan, “Optimization of the Lattice Replacement Options for the Next Generation Australian Synchrotron”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 269-271. doi:10.18429/JACoW-IPAC2021-MOPAB065
[n] K. E. Hacker et al., “Measurements and Simulations of Seeded Electron Microbunches with Collective Effects”, in Proc. FEL'15, Daejeon, Korea, Aug. 2015, pp. 650-653. doi:10.18429/JACoW-FEL2015-WEP031
[n] E. Magory, N. Balal, E. Bamberg, V. Bratman, and J. Ciplis, “Permanent hybrid helical micro-undulators for FELs and inverse FELs”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 1595-1597. doi:10.18429/JACoW-IPAC2025-TUPS093
[n] A. Campbell et al., “A VME-based Measurement System for RF Parameters in the CERN PS”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper TUP017L, pp. 1760-1762.
[n] A. Bland and R. Rausch, “The Controls Achitecture and Equipment Access of LEP”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 860-863.
For LaTeX
Use Complete Form
For BibTeX
References
- K. Endo, K. Irie, and F. Q. Zhang, “Feedback Control of 50 Hz Power Supply”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper MOP080G, pp. 2343-2345.
- J. Boedewadt and N. Ekanayake, “Simulation of Optical Transport Beamlines for High-quality Optical Beams for Accelerator Applications”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1462-1465.
- V. Aleksandrov, A. A. Fateev, and A. Tuzikov, “The Nonsymmetrical Variant of the Nonferromagnetic Extraction Kicker Magnet of the NICA Booster”, in Proc. 25th Russian Particle Accelerator Conf. (RuPAC'16), Saint Petersburg, Russia, Nov. 2016, pp. 566-568.
- V. V. Bezuglov et al., “Magnetic Systems for Beam Transport at Extraction Channels of ILU Accelerators”, in Proc. 25th Russian Particle Accelerator Conf. (RuPAC'16), Saint Petersburg, Russia, Nov. 2016, pp. 556-558.
- W.-T. Weng et al., “Upgrading the SNS Compressor Ring to 3 MW”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper THPLE013, pp. 1070-1072.
- R. W. Shaw, R. Cutler, C. S. Feigerle, A. D. Herr, Y.-Y. Lee, and C. J. Liaw, “Thin Diamond Films for SNS H- Injection Stripping”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper ROPB004, pp. 617-619.
- F. Sannibale, “Luminosity Optimization in DANE”, in Proc. 4th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'99), Chester, UK, May 1999, paper CT09, pp. XX-XX.
- J. Allard, O. Jonsson, F. Locci, and G. Mornacchi, “Rejuvenation of the Controls of the CERN ISOLDE Facility using Industrial Components”, in Proc. 8th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'01), San Jose, CA, USA, Nov. 2001, paper TUAP034, pp. XX-XX.
- L. Barbina et al., “The Design of the FERMI Personnel Access Control and Interlock System”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper TUP094L, pp. 1818-1820.
- M. Ferianis, “The ELETTRA Streak Camera: System Set-Up and First Results”, in Proc. 4th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'99), Chester, UK, May 1999, paper CT07, pp. XX-XX.
- K. E. Hacker et al., “Echo Seeding Experiment at FLASH”, in Proc. 33rd Int. Free Electron Laser Conf. (FEL'11), Shanghai, China, Aug. 2011, paper TUPB10, pp. 279-282.
- G. Burtin, R. J. Colchester, G. Ferioli, J. J. Gras, R. Jung, and J. M. Vouillot Geneva, “Adaptive Optics for the LEP 2 Synchrotron Light Monitors”, in Proc. 4th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'99), Chester, UK, May 1999, paper CT08, pp. XX-XX.
- D. Bulfone et al., “Exploitation of the Integrated Digital Processing and Analysis of the ELETTRA/SLS Transverse Multi-Bunch Feedback System”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TPAH017, pp. 1267-1269.
- J. Altaber, F. Beck, M. C. Crowley-Milling, and R. Rausch, “Suggested Principles for the Control of Furture Accelerators”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3278-3281.
- K. E. Hacker et al., “Progress Towards HGHG and EEHG at FLASH”, in Proc. 34th Int. Free Electron Laser Conf. (FEL'12), Nara, Japan, Aug. 2012, paper TUPD13, pp. 257-260.
- R. D?Âlling, “Determination of Radial Ion Beam Profile from the Energy Spectrum of Residual Gas Ions Accelerated in the Beam Potential”, in Proc. 4th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'99), Chester, UK, May 1999, paper CT02, pp. XX-XX.
- K. E. Hacker et al., “Optical Replica Synthesizer to be Recommissioned with 270 nm Seed at FLASH”, in Proc. 34th Int. Free Electron Laser Conf. (FEL'12), Nara, Japan, Aug. 2012, paper TUPD14, pp. 261-264.
- D. Bulfone et al., “First Commissioning Results of the ELETTRA Transverse Multi-Bunch Feedback”, in Proc. 5th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'01), Grenoble, France, May 2001, paper CT02, pp. XX-XX.
- R. Auchettl, R. T. Dowd, and Y. E. Tan, “Beam Dynamics, Injection and Impedance Studies for the Proposed Single Pulsed Nonlinear Injection Kicker at the Australian Synchrotron”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1219-1222.
- T. Wijnands, C. Pignard, R. Rausch, and A. Tsoulou, “Radiation Constraints in the Design and Conception of LHC Control Systems”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper TU101, pp. XX-XX.
- P. Krejcik, “Nonlinear Beam Behaviour in the CERN Antiproton Collector”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 755-758.
- R. Bracco et al., “Construction and Testing of an Electromagnetic Elliptical Wiggler for ELETTRA”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper MOP31F, pp. 2255-2257.
- D. Bulfone, M. Lonza, P. Michelini, and L. Pasquali, “The Design of the Energy Ramping System for ELETTRA”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1809-1812.
- S. Khan et al., “Results from the Optical Replica Experiments at FLASH”, in Proc. 30th Int. Free Electron Laser Conf. (FEL'08), Gyeongju, Korea, Aug. 2008, paper THBAU04, pp. 497-500.
- N. Ekanayake, S. Ackermann, C. Lechner, Th. Maltezopoulos, T. Plath, and K. E. Hacker, “Indirect Measurements of NIR and UV Ultrashort Seed Laser Pulses using a Transverse Deflecting RF-Structure”, in Proc. 36th Int. Free Electron Laser Conf. (FEL'14), Basel, Switzerland, Aug. 2014, paper MOP094, pp. 272-274.
- J. Altaber and R. Rausch, “A Multiprocessor Bus Architecture for the LEP Control System”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2281-2284.
- L. Barbina et al., “Design and Development of a New Control System for the ELETTRA Linac”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper TUP093L, pp. 1815-1817.
- J. Altaber, M. C. Crowley-Milling, P. G. Innocenti, and R. Rausch, “Replacing Mini-Computers by Multi-Microprocessors for the LEP Control System”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2287-2290.
- P. van der Meulen et al., “Technical Aspects of the Integration of the Optical Replica Synthesizer for the Diagnostics of Ultra-short Bunches into FLASH at DESY”, in Proc. 28th Int. Free Electron Laser Conf. (FEL'06), Berlin, Germany, Aug.-Sep. 2006, paper TUBAU05, pp. 296-299.
- R. Auchettl and R. T. Dowd, “Applications of Online Optimization Algorithms for Injection at the Australian Synchrotron”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 3795-3798.
- R. Auchettl, R. T. Dowd, and Y. E. Tan, “Optimization of the Lattice Replacement Options for the Next Generation Australian Synchrotron”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 269-271.
- K. E. Hacker et al., “Measurements and Simulations of Seeded Electron Microbunches with Collective Effects”, in Proc. 37th Int. Free Electron Laser Conf. (FEL'15), Daejeon, Korea, Aug. 2015, pp. 650-653.
- E. Magory, N. Balal, E. Bamberg, V. Bratman, and J. Ciplis, “Permanent hybrid helical micro-undulators for FELs and inverse FELs”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper TUPS093, pp. 1595-1597.
- A. Campbell et al., “A VME-based Measurement System for RF Parameters in the CERN PS”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper TUP017L, pp. 1760-1762.
- A. Bland and R. Rausch, “The Controls Achitecture and Equipment Access of LEP”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 860-863.
Back to search