Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] M. Xu et al., “Progress in the development of the cryomodules for CSNS-II superconducting linac”, in Proc. LINAC'24, Chicago, IL, USA, Aug. 2024, pp. 212-215. doi:10.18429/JACoW-LINAC2024-MOPB077
[n] X. Ge et al., “Design study of distributed pumping system using NEG strips for HALF”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper THPB048, unpublished.
[n] N. Banerjee et al., “Electron Cooling Experiment for Proton Beams with Intense Space-Charge in IOTA”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 2395-2398. doi:10.18429/JACoW-IPAC2022-THOXGD2
[n] S. C. Alverson, D. K. Gill, and S. Saraf, “LCLS-II Cryomodule Isolation Vacuum Pump System”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 1551-1555. doi:10.18429/JACoW-ICALEPCS2023-THPDP086
[n] M. Krasilnikov et al., “Electron Beam Asymmetry Compensation with Gun Quadrupoles at PITZ”, in Proc. FEL'17, Santa Fe, NM, USA, Aug. 2017, pp. 429-431. doi:10.18429/JACoW-FEL2017-WEP007
[n] M. McCallum et al., “Towards real-time calibration of CBPMs using synchronous RF injection”, in Proc. NAPAC'25, Sacramento, California, USA, Aug. 2025, pp. 92-96. doi:10.18429/JACoW-NAPAC2025-MOP020
[n] K. Kruchinin, G. Boorman, A. Lyapin, and M. McCallum, “Design, characterization, and validation of a pulsed RF burst source for in-situ cavity beam position monitor calibration”, in Proc. NAPAC'25, Sacramento, California, USA, Aug. 2025, pp. 98-102. doi:10.18429/JACoW-NAPAC2025-MOP025
[n] Y. Luo, N. P. Abreu, W. Fischer, and G. Robert-Demolaize, “Multi-Particle Weak-Strong Simulations of RHIC Head-on Beam-Beam Compensation”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPC062, pp. 3125-3127.
[n] C. Zhang et al., “Large-Scale Dewar Testing of FRIB Production Cavities: Statistical Analysis”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 41-43. doi:10.18429/JACoW-NAPAC2019-MOYBB4
[n] Y. Ivanyushenkov et al., “Status of the Development of Superconducting Undulators at the Advanced Photon Source”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2499-2502. doi:10.18429/JACoW-IPAC2017-WEOCA3
[n] L. Hendrickson et al., “Generalized Fast Feedback System in the SLC”, in Proc. ICALEPCS'91, Tsukuba, Japan, Nov. 1991, pp. 414-419. doi:10.18429/JACoW-ICALEPCS1991-S12FC02
[n] H. Lee, I. V. Bazarov, and L. Cultrera, “A Cryogenically Cooled High Voltage DC Photogun”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1618-1621. doi:10.18429/JACoW-IPAC2017-TUPAB127
[n] M. A. Plum et al., “SNS Proton Power Upgrade Status”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1120-1122. doi:10.18429/JACoW-IPAC2018-TUPAL049
[n] J. Schaffran, S. Aderhold, D. Reschke, L. Steder, N. Walker, and L. Monaco, “Analysis of the Test Rate for European XFEL Series Cavities”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper MOPB079, pp. 316-318.
[n] D. Winters et al., “Laser cooling taken to the extreme: cold relativistic intense beams of highly-charged heavy ions”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1314-1318. doi:10.18429/JACoW-IPAC2023-TUOGA2
[n] W. M. Yue et al., “DEVELOPMENT OF THE SUPERCONDUCTING HALF WAVE RESONATOR FOR INJECTOR II IN C-ADS”, in Proc. SRF'13, Paris, France, Sep. 2013, paper THP016, pp. 923-925.
[n] A. V. Bogomyagkov et al., “Study of the Energy Stability in the VEPP-4M Storage Ring”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper MOPRI015, pp. 386-388.
[n] V. Roger, S. Cheban, T. H. Nicol, Y. O. Orlov, D. Passarelli, and P. Vecchiolla, “Design Update of the SSR1 Cryomodule for PIP-II Project”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2721-2723. doi:10.18429/JACoW-IPAC2018-WEPML019
[n] S. M. Cousineau, “Accelerator R&D as a Driver for Science”, in Proc. IPAC'20, Caen, France, May 2020, paper MOVIRO04, pp. XX-XX.
[n] P. Krejcik, M. L. Campell, N. W. Fong, J. C. Frisch, and H. Loos, “Evaluation of New, Fast Wire Scanner Designs for the LCLS”, in Proc. BIW'12, Newport News, VA, USA, Apr. 2012, paper TUPG035, pp. 210-212.
[n] J. J. Tan, Z. H. Bai, Z. L. Ren, J. H. Xu, and Q. Zhang, “Preliminary Study of Design Method for Hybrid MBA Lattice”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 297-299. doi:10.18429/JACoW-IPAC2021-MOPAB074
For LaTeX
Use Complete Form
For BibTeX
References
- M. Xu et al., “Progress in the development of the cryomodules for CSNS-II superconducting linac”, in Proc. 32nd Linear Accelerator Conf. (LINAC'24), Chicago, IL, USA, Aug. 2024, pp. 212-215.
- X. Ge et al., “Design study of distributed pumping system using NEG strips for HALF”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper THPB048, unpublished.
- N. Banerjee et al., “Electron Cooling Experiment for Proton Beams with Intense Space-Charge in IOTA”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 2395-2398.
- S. C. Alverson, D. K. Gill, and S. Saraf, “LCLS-II Cryomodule Isolation Vacuum Pump System”, in Proc. 19th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'23), Cape Town, South Africa, Oct. 2023, paper THPDP086, pp. 1551-1555.
- M. Krasilnikov et al., “Electron Beam Asymmetry Compensation with Gun Quadrupoles at PITZ”, in Proc. 38th Int. Free Electron Laser Conf. (FEL'17), Santa Fe, NM, USA, Aug. 2017, pp. 429-431.
- M. McCallum et al., “Towards real-time calibration of CBPMs using synchronous RF injection”, in Proc. 6th North American Particle Accelerator Conference (NAPAC'25), Sacramento, California, USA, Aug. 2025, pp. 92-96.
- K. Kruchinin, G. Boorman, A. Lyapin, and M. McCallum, “Design, characterization, and validation of a pulsed RF burst source for in-situ cavity beam position monitor calibration”, in Proc. 6th North American Particle Accelerator Conference (NAPAC'25), Sacramento, California, USA, Aug. 2025, pp. 98-102.
- Y. Luo, N. P. Abreu, W. Fischer, and G. Robert-Demolaize, “Multi-Particle Weak-Strong Simulations of RHIC Head-on Beam-Beam Compensation”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THPC062, pp. 3125-3127.
- C. Zhang et al., “Large-Scale Dewar Testing of FRIB Production Cavities: Statistical Analysis”, in Proc. North American Particle Accelerator Conf. (NAPAC'19), Lansing, MI, USA, Sep. 2019, pp. 41-43.
- Y. Ivanyushenkov et al., “Status of the Development of Superconducting Undulators at the Advanced Photon Source”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 2499-2502.
- L. Hendrickson et al., “Generalized Fast Feedback System in the SLC”, in Proc. 3rd International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'91), Tsukuba, Japan, Nov. 1991, paper S12FC02, pp. 414-419.
- H. Lee, I. V. Bazarov, and L. Cultrera, “A Cryogenically Cooled High Voltage DC Photogun”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1618-1621.
- M. A. Plum et al., “SNS Proton Power Upgrade Status”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 1120-1122.
- J. Schaffran, S. Aderhold, D. Reschke, L. Steder, N. Walker, and L. Monaco, “Analysis of the Test Rate for European XFEL Series Cavities”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper MOPB079, pp. 316-318.
- D. Winters et al., “Laser cooling taken to the extreme: cold relativistic intense beams of highly-charged heavy ions”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUOGA2, pp. 1314-1318.
- W. M. Yue et al., “DEVELOPMENT OF THE SUPERCONDUCTING HALF WAVE RESONATOR FOR INJECTOR II IN C-ADS”, in Proc. 16th Int. Conf. RF Superconductivity (SRF'13), Paris, France, Sep. 2013, paper THP016, pp. 923-925.
- A. V. Bogomyagkov et al., “Study of the Energy Stability in the VEPP-4M Storage Ring”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper MOPRI015, pp. 386-388.
- V. Roger, S. Cheban, T. H. Nicol, Y. O. Orlov, D. Passarelli, and P. Vecchiolla, “Design Update of the SSR1 Cryomodule for PIP-II Project”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2721-2723.
- S. M. Cousineau, “Accelerator R&D as a Driver for Science”, in Proc. 11th Int. Particle Accelerator Conf. (IPAC'20), Caen, France, May 2020, paper MOVIRO04, pp. XX-XX.
- P. Krejcik, M. L. Campell, N. W. Fong, J. C. Frisch, and H. Loos, “Evaluation of New, Fast Wire Scanner Designs for the LCLS”, in Proc. 15th Beam Instrumentation Workshop (BIW'12), Newport News, VA, USA, Apr. 2012, paper TUPG035, pp. 210-212.
- J. J. Tan, Z. H. Bai, Z. L. Ren, J. H. Xu, and Q. Zhang, “Preliminary Study of Design Method for Hybrid MBA Lattice”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 297-299.
Back to search