Warning
Some papers titles are all uppercase, you must correct this before using this reference.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] D. H. Ha et al., “Design and Manufacture of 10 kW, 83.2 MHz 4-way Power Combiner for Solid State Amplifier”, in Proc. Cyclotrons'19, Cape Town, South Africa, Sep. 2019, pp. 97-99. doi:10.18429/JACoW-CYCLOTRONS2019-MOP029
[n] J. Berg, “Choosing Cavity Voltages and Phases for the CBETA Multi-Pass Energy Recovery Linac”, presented at the IPAC'23, Venice, Italy, May 2023, paper MOPL161, unpublished.
[n] S. C. Hartman, T. Shintake, and N. Akasaka, “Nanometer Resolution BPM Using Damped Slot Resonator”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TPC29, pp. 2655-2657.
[n] M. Abbaslou et al., “Beam dynamics design for alternating phase focusing proton linac for a compact accelerator based neutron source”, presented at the HIAT'25, East Lansing, MI, USA, Jun. 2025, paper MOP13, unpublished.
[n] J. Peng et al., “Beam Commissioning Results of the CSNS Linac”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1223-1225. doi:10.18429/JACoW-IPAC2017-TUOBA1
[n] P. Piminov et al., “Y(1S)-meson rest mass measurement on the VEPP-4M collider”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 582-584. doi:10.18429/JACoW-IPAC2025-MOPM115
[n] T. Knuth, D. Krämer, E. Weihreter, I. Chertok, S. Michailov, and B. Sukhina, “The Magnet System for the BESSY II Injector Synchrotron”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TPE09, pp. 1316-1318.
[n] O. Meshkov et al., “Development and testing of an autocorrelator for measuring the duration of picosecond pulses of near infrared radiation”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 3174-3176. doi:10.18429/JACoW-IPAC2025-THPS104
[n] J. S. L. Yap et al., “Tracking and LET Measurements with the MiniPIX-TimePIX Detector for 60 MeV Clinical Protons”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 1260-1263. doi:10.18429/JACoW-IPAC2021-MOPAB418
[n] V. H. Hardion, M. Lindberg, and D. P. Spruce, “The MAX IV Way of Agile Project Management for the Control System”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 1021. doi:10.18429/JACoW-ICALEPCS2019-WEMPL008
[n] A. Wrulich, “Optimization of the Accelerating Structures for the Superconducting Linear Accelerator of the Energy Amplifier”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 5W034, pp. 1188-1190.
[n] M. Checchin, A. Grassellino, M. Martinello, A. Romanenko, and J. Zasadzinski, “Mean Free Path Dependence of the Trapped Flux Surface Resistance”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper MOPB020, pp. 129-134.
[n] R. W. Thomae et al., “Low beta Ion Acceleration with the FOM-MEQALAC-System”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3172-3175.
[n] M. Xiao, V. P. Nagaslaev, V. Sajaev, and A. Valishev, “Linear Lattice Modeling of the Recycler Ring at Fermilab”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPCH059, pp. 2056-2058.
[n] M. Parise, P. Duchesne, D. Longuevergne, D. Passarelli, and V. Roger, “Fabrication Experience of the Pre-Production PIP-II SSR2 Cavities at Fermilab”, in Proc. LINAC'22, Liverpool, UK, Aug.-Sep. 2022, pp. 529-532. doi:10.18429/JACoW-LINAC2022-TUPOGE17
[n] D. E. Suddeth and G. J. Volk, “Intense Pulsed Neutron Source (IPNS-I) Accelerator 500 MeV Fast Kickers”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3024-3026.
[n] M. Xiao, R. Ainsworth, K. J. Hazelwood, and M.-J. Yang, “Linear Modelling and Lattice Correction from Betatron Phase Measurements at the Fermilab Recycler NOvA Ring”, in Proc. HB'23, Geneva, Switzerland, Oct. 2023, pp. 534-537. doi:10.18429/JACoW-HB2023-THBP30
[n] J. E. Spencer, “High Brightness Sources for Colliders”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 3270-3273.
[n] S. Makimura et al., “Muon production target at J-PARC”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1941-1944. doi:10.18429/JACoW-IPAC2024-WECN1
[n] J. C. Lee et al., “RF measurement of SKKUCY-10 RF Cavity for Impedance Matching”, in Proc. Cyclotrons'19, Cape Town, South Africa, Sep. 2019, pp. 100-102. doi:10.18429/JACoW-CYCLOTRONS2019-MOP030
[n] J. Wang and H. Yin, “Design and optimization of diffraction-limited storage ring lattices based on many-objective evolutionary algorithms”, presented at the IPAC'23, Venice, Italy, May 2023, paper WEPL085, unpublished.
[n] T. Xu et al., “Low-emittance SRF photo-injector prototype cryomodule for the LCLS-II high-energy upgrade: design and fabrication”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1396-1399. doi:10.18429/JACoW-IPAC2023-TUPA028
[n] H. M. Milcent and F. B. Bernard, “LHC Powering Circuit Overview: A Mixed Industrial and Classic Accelerator Control Application”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper TPPB23, pp. 211-213.
[n] G. S. Bauer, “Development of High Power Targets”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper FRXCH01, pp. 276-280.
[n] Y. Y. Guo, H. F. Ji, Y. Jiao, and N. Li, “Preliminary study of the fringe field effects and cross talk between magnets in the HEPS storage ring”, presented at the SAP'23, Xichang, China, Jul. 2023, paper TUPB030, unpublished.
[n] P. Pizzol, D. Vandygriff, J. Mammosser, R. Afanador, and S. Gold, “First results of the sXmap cavity field emission detection system from inside a cryomodule”, in Proc. NAPAC'25, Sacramento, California, USA, Aug. 2025, pp. 287-290. doi:10.18429/JACoW-NAPAC2025-MOP100
[n] T. Itahashi, M. Kondo, and T. Yamagata, “Feasibility Study for Acceleration of Fission Fragments with AVF Cyclotron”, in Proc. Cyclotrons'89, Berlin, Germany, May 1989, paper J-12, pp. 608-611.
[n] C. Christou, K. Dunkel, C. Piel, and V. Kempson, “The Pre-Injector Linac for the Diamond Light Source”, in Proc. LINAC'04, Lübeck, Germany, Aug. 2004, paper MOP21, pp. 84-86.
[n] K. C. D. Chan and S. O. Schriber, “Characteristics of Large Beam Hole Biperiodic Accelerator Structures”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2766-2769.
[n] A. H. Botha et al., “An Injector Cyclotron for Acceleration of Polarised and Heavy Ions at the NAC”, in Proc. Cyclotrons'86, Tokyo, Japan, Oct. 1986, paper I6-13, pp. 515-518.
[n] D. Xu, J. Berg, S. Peggs, and V. Ptitsyn, “Lattice design for Low Energy Cooling in EIC HSR-IR2”, in Proc. NAPAC'25, Sacramento, California, USA, Aug. 2025, pp. 496-499. doi:10.18429/JACoW-NAPAC2025-TUP059
[n] V. Maior, V. Dorokhov, O. Meshkov, and M. Timoshenko, “Measurement of the radiation damping time via optical methods”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 2766-2769. doi:10.18429/JACoW-IPAC2025-THPM038
[n] S. Krave, V. Marinozzi, and R. Jayathilaka, “Bi-filar coil winding for fast quench protection”, presented at the NAPAC'25, Sacramento, California, USA, Aug. 2025, paper SUP059, unpublished.
[n] M. Abbaslou et al., “Design considerations for a proton linac for a compact accelerator based neutron source for Canada”, presented at the HIAT'25, East Lansing, MI, USA, Jun. 2025, paper MOC02, unpublished.
[n] O. Kester, D. Marquardt, M. Abbaslou, A. Gottberg, and R. Laxdal, “Development of compact accelerator based neutron sources for Canada, the PC-CANS project”, in Proc. HIAT'25, East Lansing, MI, USA, Jun. 2025, pp. 323-326. doi:10.18429/JACoW-HIAT2025-FRB02
[n] D. D. Bhawalkar, “RECENT AND FUTURE ACCELERATOR ACTIVITIES IN INDIA”, in Proc. APAC'01, Beijing, China, Sep. 2001, paper MOA04, pp. XX-XX.
[n] P. N. Ostroumov et al., “Advanced Beam-Dynamics Simulation Tools for RIA”, in Proc. LINAC'04, Lübeck, Germany, Aug. 2004, paper MOP71, pp. 186-188.
[n] M. H. Donald, T. M. Himel, and S. Zelazny, “Diagnosis of Coupling and Beta Function Errors in the PEP-II B-Factory”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper THPLT162, pp. 2840-2842.
[n] Z. Sun, M. Liepe, and T. E. Oseroff, “First Demonstration of a ZrNb Alloyed Surface for Superconducting Radio-Frequency Cavities”, in Proc. NAPAC'22, Albuquerque, NM, USA, Aug. 2022, pp. 881-884. doi:10.18429/JACoW-NAPAC2022-THYE6
[n] S. A. Kheifets and S. A. Heifets, “Study of a Detuned Accelerating Section With the Computer Program PROGON”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 3462-3464.
[n] D. Berkovits et al., “Simulations of Ion Beam Loss in RF Linacs with Emphasis on Tails of Particle Distributions”, in Proc. LINAC'10, Tsukuba, Japan, Sep. 2010, paper THP091, pp. 956-958.
[n] G. Spalek et al., “Studies of Coupled Cavity Linac (CCL) Accelerating Structures with 3-D Codes”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper THD18, pp. 950-952.
[n] Y. Y. Guo, Y. Jiao, and N. Li, “Effect of Different Models of Combined-function Dipoles on the HEPS Parameters”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 335-338. doi:10.18429/JACoW-IPAC2021-MOPAB089
[n] A. Perin, B. Bradu, J. Bremer, S. Claudet, D. Delikaris, and F. Ferrand, “Cryogenic eficiency and sustainability aspects for particle accelerators & detectors”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 1691-1694. doi:10.18429/JACoW-IPAC2025-WEBD1
[n] J. E. Spencer, “Tests and Analysis for SLC Damping Ring Data”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 396-399.
[n] X. Shen, L. O. Dallin, R. M. Silzer, T. Summers, and M. S. de Jong, “Status and Upgrade Plan of 250 MeV Linac at CLS”, in Proc. LINAC'08, Victoria, Canada, Sep.-Oct. 2008, paper TUP001, pp. 380-382.
For LaTeX
Use Complete Form
For BibTeX
References
- D. H. Ha et al., “Design and Manufacture of 10 kW, 83.2 MHz 4-way Power Combiner for Solid State Amplifier”, in Proc. 22nd Int. Conf. on Cyclotrons and their Applications (Cyclotrons'19), Cape Town, South Africa, Sep. 2019, pp. 97-99.
- J. Berg, “Choosing Cavity Voltages and Phases for the CBETA Multi-Pass Energy Recovery Linac”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPL161, unpublished.
- S. C. Hartman, T. Shintake, and N. Akasaka, “Nanometer Resolution BPM Using Damped Slot Resonator”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper TPC29, pp. 2655-2657.
- M. Abbaslou et al., “Beam dynamics design for alternating phase focusing proton linac for a compact accelerator based neutron source”, presented at the 16th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'25), East Lansing, MI, USA, Jun. 2025, paper MOP13, unpublished.
- J. Peng et al., “Beam Commissioning Results of the CSNS Linac”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1223-1225.
- P. Piminov et al., “Y(1S)-meson rest mass measurement on the VEPP-4M collider”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper MOPM115, pp. 582-584.
- T. Knuth, D. Krämer, E. Weihreter, I. Chertok, S. Michailov, and B. Sukhina, “The Magnet System for the BESSY II Injector Synchrotron”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper TPE09, pp. 1316-1318.
- O. Meshkov et al., “Development and testing of an autocorrelator for measuring the duration of picosecond pulses of near infrared radiation”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper THPS104, pp. 3174-3176.
- J. S. L. Yap et al., “Tracking and LET Measurements with the MiniPIX-TimePIX Detector for 60 MeV Clinical Protons”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 1260-1263.
- V. H. Hardion, M. Lindberg, and D. P. Spruce, “The MAX IV Way of Agile Project Management for the Control System”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 1021.
- A. Wrulich, “Optimization of the Accelerating Structures for the Superconducting Linear Accelerator of the Energy Amplifier”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 5W034, pp. 1188-1190.
- M. Checchin, A. Grassellino, M. Martinello, A. Romanenko, and J. Zasadzinski, “Mean Free Path Dependence of the Trapped Flux Surface Resistance”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper MOPB020, pp. 129-134.
- R. W. Thomae et al., “Low beta Ion Acceleration with the FOM-MEQALAC-System”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 3172-3175.
- M. Xiao, V. P. Nagaslaev, V. Sajaev, and A. Valishev, “Linear Lattice Modeling of the Recycler Ring at Fermilab”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper WEPCH059, pp. 2056-2058.
- M. Parise, P. Duchesne, D. Longuevergne, D. Passarelli, and V. Roger, “Fabrication Experience of the Pre-Production PIP-II SSR2 Cavities at Fermilab”, in Proc. 31st Linear Accelerator Conf. (LINAC'22), Liverpool, UK, Aug.-Sep. 2022, pp. 529-532.
- D. E. Suddeth and G. J. Volk, “Intense Pulsed Neutron Source (IPNS-I) Accelerator 500 MeV Fast Kickers”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3024-3026.
- M. Xiao, R. Ainsworth, K. J. Hazelwood, and M.-J. Yang, “Linear Modelling and Lattice Correction from Betatron Phase Measurements at the Fermilab Recycler NOvA Ring”, in Proc. HB'23 (HB), Geneva, Switzerland, Oct. 2023, paper THBP30, pp. 534-537.
- J. E. Spencer, “High Brightness Sources for Colliders”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 3270-3273.
- S. Makimura et al., “Muon production target at J-PARC”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper WECN1, pp. 1941-1944.
- J. C. Lee et al., “RF measurement of SKKUCY-10 RF Cavity for Impedance Matching”, in Proc. 22nd Int. Conf. on Cyclotrons and their Applications (Cyclotrons'19), Cape Town, South Africa, Sep. 2019, pp. 100-102.
- J. Wang and H. Yin, “Design and optimization of diffraction-limited storage ring lattices based on many-objective evolutionary algorithms”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPL085, unpublished.
- T. Xu et al., “Low-emittance SRF photo-injector prototype cryomodule for the LCLS-II high-energy upgrade: design and fabrication”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPA028, pp. 1396-1399.
- H. M. Milcent and F. B. Bernard, “LHC Powering Circuit Overview: A Mixed Industrial and Classic Accelerator Control Application”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper TPPB23, pp. 211-213.
- G. S. Bauer, “Development of High Power Targets”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper FRXCH01, pp. 276-280.
- Y. Y. Guo, H. F. Ji, Y. Jiao, and N. Li, “Preliminary study of the fringe field effects and cross talk between magnets in the HEPS storage ring”, presented at the 14th Symposium on Accelerator Physics (SAP'23), Xichang, China, Jul. 2023, paper TUPB030, unpublished.
- P. Pizzol, D. Vandygriff, J. Mammosser, R. Afanador, and S. Gold, “First results of the sXmap cavity field emission detection system from inside a cryomodule”, in Proc. 6th North American Particle Accelerator Conference (NAPAC'25), Sacramento, California, USA, Aug. 2025, pp. 287-290.
- T. Itahashi, M. Kondo, and T. Yamagata, “Feasibility Study for Acceleration of Fission Fragments with AVF Cyclotron”, in Proc. 12th Int. Cyclotron Conf. and Their Applications (Cyclotrons'89), Berlin, Germany, May 1989, paper J-12, pp. 608-611.
- C. Christou, K. Dunkel, C. Piel, and V. Kempson, “The Pre-Injector Linac for the Diamond Light Source”, in Proc. 22nd Linear Accelerator Conf. (LINAC'04), Lübeck, Germany, Aug. 2004, paper MOP21, pp. 84-86.
- K. C. D. Chan and S. O. Schriber, “Characteristics of Large Beam Hole Biperiodic Accelerator Structures”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2766-2769.
- A. H. Botha et al., “An Injector Cyclotron for Acceleration of Polarised and Heavy Ions at the NAC”, in Proc. 11th Int. Cyclotron Conf. and Their Applications (Cyclotrons'86), Tokyo, Japan, Oct. 1986, paper I6-13, pp. 515-518.
- D. Xu, J. Berg, S. Peggs, and V. Ptitsyn, “Lattice design for Low Energy Cooling in EIC HSR-IR2”, in Proc. 6th North American Particle Accelerator Conference (NAPAC'25), Sacramento, California, USA, Aug. 2025, pp. 496-499.
- V. Maior, V. Dorokhov, O. Meshkov, and M. Timoshenko, “Measurement of the radiation damping time via optical methods”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper THPM038, pp. 2766-2769.
- S. Krave, V. Marinozzi, and R. Jayathilaka, “Bi-filar coil winding for fast quench protection”, presented at the 6th North American Particle Accelerator Conference (NAPAC'25), Sacramento, California, USA, Aug. 2025, paper SUP059, unpublished.
- M. Abbaslou et al., “Design considerations for a proton linac for a compact accelerator based neutron source for Canada”, presented at the 16th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'25), East Lansing, MI, USA, Jun. 2025, paper MOC02, unpublished.
- O. Kester, D. Marquardt, M. Abbaslou, A. Gottberg, and R. Laxdal, “Development of compact accelerator based neutron sources for Canada, the PC-CANS project”, in Proc. 16th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'25), East Lansing, MI, USA, Jun. 2025, paper FRB02, pp. 323-326.
- D. D. Bhawalkar, “RECENT AND FUTURE ACCELERATOR ACTIVITIES IN INDIA”, in Proc. 2nd Asian Particle Accelerator Conf. (APAC'01), Beijing, China, Sep. 2001, paper MOA04, pp. XX-XX.
- P. N. Ostroumov et al., “Advanced Beam-Dynamics Simulation Tools for RIA”, in Proc. 22nd Linear Accelerator Conf. (LINAC'04), Lübeck, Germany, Aug. 2004, paper MOP71, pp. 186-188.
- M. H. Donald, T. M. Himel, and S. Zelazny, “Diagnosis of Coupling and Beta Function Errors in the PEP-II B-Factory”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper THPLT162, pp. 2840-2842.
- Z. Sun, M. Liepe, and T. E. Oseroff, “First Demonstration of a ZrNb Alloyed Surface for Superconducting Radio-Frequency Cavities”, in Proc. North American Particle Accelerator Conf. (NAPAC'22), Albuquerque, NM, USA, Aug. 2022, pp. 881-884.
- S. A. Kheifets and S. A. Heifets, “Study of a Detuned Accelerating Section With the Computer Program PROGON”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 3462-3464.
- D. Berkovits et al., “Simulations of Ion Beam Loss in RF Linacs with Emphasis on Tails of Particle Distributions”, in Proc. 25th Linear Accelerator Conf. (LINAC'10), Tsukuba, Japan, Sep. 2010, paper THP091, pp. 956-958.
- G. Spalek et al., “Studies of Coupled Cavity Linac (CCL) Accelerating Structures with 3-D Codes”, in Proc. 20th Linear Accelerator Conf. (LINAC'00), Monterey, CA, USA, Aug. 2000, paper THD18, pp. 950-952.
- Y. Y. Guo, Y. Jiao, and N. Li, “Effect of Different Models of Combined-function Dipoles on the HEPS Parameters”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 335-338.
- A. Perin, B. Bradu, J. Bremer, S. Claudet, D. Delikaris, and F. Ferrand, “Cryogenic eficiency and sustainability aspects for particle accelerators & detectors”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper WEBD1, pp. 1691-1694.
- J. E. Spencer, “Tests and Analysis for SLC Damping Ring Data”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 396-399.
- X. Shen, L. O. Dallin, R. M. Silzer, T. Summers, and M. S. de Jong, “Status and Upgrade Plan of 250 MeV Linac at CLS”, in Proc. 24th Linear Accelerator Conf. (LINAC'08), Victoria, Canada, Sep.-Oct. 2008, paper TUP001, pp. 380-382.
Back to search