Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] S. G. Tantawi et al., “High-Power RF Pulse Compression with SLED-II at SLAC”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1196-1199.
[n] S. Yu. Taskaev et al., “Vacuum Insulation Tandem Accelerator: Progress and Prospects”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 147-149. doi:10.18429/JACoW-RUPAC2016-THCEMH01
[n] M. Boscolo et al., “Challenges for the Interaction Region Design of the Future Circular Collider FCC-ee”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2668-2671. doi:10.18429/JACoW-IPAC2021-WEPAB029
[n] S. Jadlovska et al., “Frontend Control System for the ALICE Detectors”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, paper WEPHA070, pp. XX-XX.
[n] V. Toivanen, J. O. Huovila, H. A. Koivisto, and O. A. Tarvainen, “Time-resolved measurement of ion beam energy spread variation due to kinetic plasma instabilities in CW and pulsed operation of an ECRIS”, in Proc. ECRIS'24, Darmstadt, Germany, Sep. 2024, pp. 86-90. doi:10.18429/JACoW-ECRIS2024-TUD1
[n] E. Renner et al., “Optimised Transverse Painting Schemes for the New 160 MeV H⁻ Injection System at CERN”, in Proc. HB'21, Batavia, IL, USA, Oct. 2021, pp. 118-123. doi:10.18429/JACoW-HB2021-MOP19
[n] S. Nagaitsev et al., “Noise in Intense Electron Bunches”, in Proc. NAPAC'22, Albuquerque, NM, USA, Aug. 2022, pp. 128-131. doi:10.18429/JACoW-NAPAC2022-MOPA34
[n] L. T. Sun et al., “FECR Ion Source Development and Challenges”, in Proc. ECRIS'20, East Lansing, MI, USA, Sep. 2020, pp. 1-5. doi:10.18429/JACoW-ECRIS2020-MOWZO01
[n] E. M. Mei, “A novel design of superconducting magnet for ECR ion source”, presented at the ECRIS'24, Darmstadt, Germany, Sep. 2024, paper TUP12, unpublished.
[n] R. Liang, F. S. Chen, and Q. Li, “Automatic Collimation Device For A Long coil Magnet Measurement System”, presented at the MEDSI'23, Beijing, China, Nov. 2023, paper THPPP032, unpublished.
[n] N. Patel, J. S. Diamond, N. Eddy, C. R. McClure, P. S. Prieto, and D. C. Voy, “Beam Position Monitoring System for FermilabÔÇÖs Muon Campus”, in Proc. IBIC'19, Malmö, Sweden, Sep. 2019, pp. 648-650. doi:10.18429/JACoW-IBIC2019-WEPP044
[n] J. Angot, P. Chauveau, A. Galatà, O. A. Tarvainen, and T. Thuillier, “The electrostatic deceleration of ions injected into an ECRIS CB plasma”, presented at the ECRIS'24, Darmstadt, Germany, Sep. 2024, paper TUA3, unpublished.
[n] S. Niang et al., “Shower Simulations for the CERN Proton Synchrotron Internal Dump and Comparison with Beam Loss Monitor Data”, in Proc. HB'23, Geneva, Switzerland, Oct. 2023, pp. 389-392. doi:10.18429/JACoW-HB2023-THC2C1
[n] A. S. Kuznetsov, V. I. Aleynik, I. M. Shchudlo, I. N. Sorokin, S. Yu. Taskaev, and M. A. Tiunov, “Calibration Testing of the Stripping Target of the Vacuum Insulated Tandem Accelerator”, in Proc. RuPAC'12, Saint Petersburg, Russia, Sep. 2012, paper WEPPC057, pp. 560-562.
[n] D. DI FRANCESCA et al., “A radiation-resistant distributed temperature sensor for CERN’s accelerators”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 2583-2586. doi:10.18429/JACoW-IPAC2025-THPB034
[n] A. France, M. Desmons, O. Piquet, and C. Rossi, “RF Design and Tuning of Linac4 RFQ”, in Proc. RuPAC'12, Saint Petersburg, Russia, Sep. 2012, paper WEPPC002, pp. 448-450.
[n] M. Schedler, P. Haenisch, W. Hillert, D. Proft, and J. Zappai, “A New High Current and Single Bunch Injector at ELSA”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper THPP005, pp. 847-849.
[n] R. M. Thurman-Keup et al., “Observation of Polarization-Dependent Changes in Higher-Order Mode Responses as a Function of Transverse Beam Position in Tesla-Type Cavities at FAST”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 756-759. doi:10.18429/JACoW-IPAC2021-MOPAB232
For LaTeX
Use Complete Form
For BibTeX
References
- S. G. Tantawi et al., “High-Power RF Pulse Compression with SLED-II at SLAC”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 1196-1199.
- S. Yu. Taskaev et al., “Vacuum Insulation Tandem Accelerator: Progress and Prospects”, in Proc. 25th Russian Particle Accelerator Conf. (RuPAC'16), Saint Petersburg, Russia, Nov. 2016, pp. 147-149.
- M. Boscolo et al., “Challenges for the Interaction Region Design of the Future Circular Collider FCC-ee”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 2668-2671.
- S. Jadlovska et al., “Frontend Control System for the ALICE Detectors”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, paper WEPHA070, pp. XX-XX.
- V. Toivanen, J. O. Huovila, H. A. Koivisto, and O. A. Tarvainen, “Time-resolved measurement of ion beam energy spread variation due to kinetic plasma instabilities in CW and pulsed operation of an ECRIS”, in Proc. 26th International Workshop on ECR Ion Sources (ECRIS'24), Darmstadt, Germany, Sep. 2024, pp. 86-90.
- E. Renner et al., “Optimised Transverse Painting Schemes for the New 160 MeV H⁻ Injection System at CERN”, in Proc. 64th Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'21), Batavia, IL, USA, Oct. 2021, paper MOP19, pp. 118-123.
- S. Nagaitsev et al., “Noise in Intense Electron Bunches”, in Proc. North American Particle Accelerator Conf. (NAPAC'22), Albuquerque, NM, USA, Aug. 2022, pp. 128-131.
- L. T. Sun et al., “FECR Ion Source Development and Challenges”, in Proc. 24th International Workshop on ECR Ion Sources (ECRIS'20), East Lansing, MI, USA, Sep. 2020, paper MOWZO01, pp. 1-5.
- E. M. Mei, “A novel design of superconducting magnet for ECR ion source”, presented at the 26th International Workshop on ECR Ion Sources (ECRIS'24), Darmstadt, Germany, Sep. 2024, paper TUP12, unpublished.
- R. Liang, F. S. Chen, and Q. Li, “Automatic Collimation Device For A Long coil Magnet Measurement System”, presented at the MEDSI (MEDSI'23), Beijing, China, Nov. 2023, paper THPPP032, unpublished.
- N. Patel, J. S. Diamond, N. Eddy, C. R. McClure, P. S. Prieto, and D. C. Voy, “Beam Position Monitoring System for FermilabÔÇÖs Muon Campus”, in Proc. 8th Int. Beam Instrumentation Conf. (IBIC'19), Malmö, Sweden, Sep. 2019, pp. 648-650.
- J. Angot, P. Chauveau, A. Galatà, O. A. Tarvainen, and T. Thuillier, “The electrostatic deceleration of ions injected into an ECRIS CB plasma”, presented at the 26th International Workshop on ECR Ion Sources (ECRIS'24), Darmstadt, Germany, Sep. 2024, paper TUA3, unpublished.
- S. Niang et al., “Shower Simulations for the CERN Proton Synchrotron Internal Dump and Comparison with Beam Loss Monitor Data”, in Proc. HB'23 (HB), Geneva, Switzerland, Oct. 2023, paper THC2C1, pp. 389-392.
- A. S. Kuznetsov, V. I. Aleynik, I. M. Shchudlo, I. N. Sorokin, S. Yu. Taskaev, and M. A. Tiunov, “Calibration Testing of the Stripping Target of the Vacuum Insulated Tandem Accelerator”, in Proc. 23rd Russian Particle Accelerator Conf. (RuPAC'12), Saint Petersburg, Russia, Sep. 2012, paper WEPPC057, pp. 560-562.
- D. DI FRANCESCA et al., “A radiation-resistant distributed temperature sensor for CERN’s accelerators”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, pp. 2583-2586.
- A. France, M. Desmons, O. Piquet, and C. Rossi, “RF Design and Tuning of Linac4 RFQ”, in Proc. 23rd Russian Particle Accelerator Conf. (RuPAC'12), Saint Petersburg, Russia, Sep. 2012, paper WEPPC002, pp. 448-450.
- M. Schedler, P. Haenisch, W. Hillert, D. Proft, and J. Zappai, “A New High Current and Single Bunch Injector at ELSA”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper THPP005, pp. 847-849.
- R. M. Thurman-Keup et al., “Observation of Polarization-Dependent Changes in Higher-Order Mode Responses as a Function of Transverse Beam Position in Tesla-Type Cavities at FAST”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 756-759.
Back to search