Warning
Some papers have malformed authors, please correct this before using these references.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] R. Bartolini et al., “Novel Lattice Upgrade Studies for Diamond Light Source”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPEA068, pp. 240-242.
[n] J. M. Brennan and M. Blaskiewicz, “Stochastic Cooling in RHIC”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE3GRI01, pp. 1910-1914.
[n] R. P. Walker, N. P. Hammond, J. Kay, S. P. Mhaskar, B. Singh, and R. Bartolini, “Study of the Possibility of Implementing a Superbend in the Diamond Light Source”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPC071, pp. 3059-3061.
[n] N. Cook et al., “An online analysis platform to facilitate analysis at X-ray light source”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper THPG83, unpublished.
[n] M. T. Heron, K. A. R. Baker, S. Lay, and P. D. Woods, “Use of Industrial Control Solutions in the Diamond Project”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper WP548, pp. XX-XX.
[n] D. P. Missiaen, J.-P. Quesnel, and R. J. Steinhagen, “The Alignment of the LHC”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE4GRC04, pp. 1973-1975.
[n] Y. Honda, “Development of CW Laser Wire in Storage Ring and Pulsed Laser Wire”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE3GRI03, pp. 1920-1924.
[n] A. C. Araujo Martinez, R. Agustsson, S. Kutsaev, A. Moro, A. Smirnov, and A. Aleksandrov, “First testing results of an improved multi-dimensional bunch shape monitor”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper MOCN3, unpublished.
[n] S. V. Kutsaev et al., “High-Gradient Accelerating Structure for Hadron Therapy Linac, Operating at kHz Repetition Rates”, in Proc. LINAC'22, Liverpool, UK, Aug.-Sep. 2022, pp. 126-129. doi:10.18429/JACoW-LINAC2022-MOPOPA22
[n] K. Wootton et al., “A laser plasma wakefield electron accelerator for the Advanced Photon Source and Low-Energy Accelerator Facility”, presented at the LINAC'24, Chicago, IL, USA, Aug. 2024, paper THPB002, unpublished.
[n] V. Komarova, L. Sevryukova, M. Tchernov, and I. Zvonarev, “The Influence of the Injection Energy on the Acceleration RF Structure Geometry and the Beam Dynamics of SVAAP”, in Proc. SRF'97, Padova, Italy, Oct. 1997, paper SRF97A31, pp. 269-275.
[n] F. Furuta et al., “Progress and challenges in traveling-wave (TW) SRF cavity”, in Proc. LINAC'24, Chicago, IL, USA, Aug. 2024, pp. 621-624. doi:10.18429/JACoW-LINAC2024-THAA009
[n] S. I. Bibko, I. K. Sedlyarov, and V. G. Veshtcherevich, “Superconducting RF Cavity for Factory”, in Proc. SRF'91, Hamburg, Germany, Aug. 1991, paper SRF91E06, pp. XX-XX.
[n] M. Ferianis, “State of the Art in High-Stability Timing, Phase Reference Distribution and Synchronization Systems”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE3GRI02, pp. 1915-1919.
[n] M. Jaski, C. Doose, J. Humbert, K. Thompson, and R. Wright, “New Synchrotron Injection Septum Magnet at the APS”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPPH007, pp. 3230-3232.
[n] V. Sajaev et al., “First injection and lattice commissioning of APS upgrade storage ring”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper TUPG08, unpublished.
[n] A. V. Burov, “Head-Tail Modes for Strong Space Charge”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE3PBI01, pp. 1889-1893.
[n] M. Borland, C. Doose, A. Jain, M. Jaski, and R. Lindberg, “Use of two- and three-dimensional magnetic measurement data to refine the APS upgrade model”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper THPC03, unpublished.
[n] Y. Verma, M. Aggarwal, V. J. Joshi, and A. Sharma, “Characterization Study of a Button BPM with an Approach to Automated Measurements”, in Proc. IBIC'20, Santos, Brazil, Sep. 2020, pp. 233-236. doi:10.18429/JACoW-IBIC2020-THPP12
[n] T. Nakagawa, “ECR Ion Sources: A Brief History and Look into the Next Generation”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE2GRI01, pp. 1861-1865.
[n] K. ?¢agar, Cosylab, Ljubljana, “Longevity of Accelerator Control Systems Middleware”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE1RAC04, pp. 1795-1797.
[n] N. Hiller et al., “Single-Shot Electro-Optical Diagnostics at the ANKA Storage Ring”, in Proc. IBIC'14, Monterey, CA, USA, Sep. 2014, paper MOPD17, pp. 182-186.
[n] S. Wang et al., “Evolution of realistic beam distributions in space-charge-dominated electron beams”, presented at the NAPAC'25, Sacramento, California, USA, Aug. 2025, paper SUP038, unpublished.
[n] Y. Kobayashi et al., “Recent Progress of the Operation at PF-Ring and PF-AR”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU5RFP031, pp. 1165-1167.
[n] Y. Funakoshi et al., “Recent Progress of KEKB”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE6PFP043, pp. 2588-2590.
[n] R. Monroy-Villa, F. Hug, T. Stengler, and I. Ben-Zvi, “Design of a fast reactive tuner for 1.3 GHz TESLA cavities at MESA”, in Proc. SRF'25, Tokyo, Japan, Sep. 2025, pp. 797-803. doi:10.18429/JACoW-SRF2025-THP81
[n] A. A. Litvinov, I. K. Sedlyarov, and A. G. Tribendis, “Set-up for Nb Surface Quality Checking Using HC3”, in Proc. SRF'87, Lemont, IL, USA, Sep. 1987, paper SRF87F02, pp. XX-XX.
[n] M. T. F. Pivi, “Detailed Electron-Cloud Modeling with CMAD”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE1PBI01, pp. 1801-1801.
[n] A. Sharma, K. Åhnberg, L. Roslund, A. Andersson, P. Tavares, and A. Vorozhtsov, “Design overview and project status of the PM gradient dipole at MAX IV”, presented at the IPAC'26, Deauville, France, May 2026, paper MOP7164, unpublished.
[n] S. Naknaimueang et al., “Design Studies for FLUTE, A Linac-based Source of Terahertz Radiation”, in Proc. FEL'13, New York, NY, USA, Aug. 2013, paper WEPSO44, pp. 598-601.
[n] R. Kumar et al., “Exploring the potential of accelerator-based neutron generators in modern research”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 1088-1090. doi:10.18429/JACoW-IPAC2025-TUPB055
[n] E. Todesco et al., “The Magnetic Model of the LHC in the Early Phase of Beam Commissioning”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOOCRA01, pp. 55-57.
[n] A. Schaller, J. Fitzek, D. Lorenz, and F. Wolf, “Optimized Calculation of Timing for Parallel Beam Operation at the FAIR Accelerator Complex”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 411-415. doi:10.18429/JACoW-ICALEPCS2017-TUPHA019
[n] M. Borland, M. Jaski, and A. Jain, “Estimates of cross-talk effects for magnets of the Advanced Photon Source upgrade lattice”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper THPC02, unpublished.
[n] A. Sharma, R. K. Gangwar, and B. K. Sahu, “Design and Development of a Novel Stripline Fast Faraday Cup to Measure Ion Beam Profile”, in Proc. IBIC'20, Santos, Brazil, Sep. 2020, pp. 246-249. doi:10.18429/JACoW-IBIC2020-THPP21
[n] D. Blanc, “Integration of the Process Control Systems for the Automation of the LHC Cooling and Ventilation Plants”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper TU214, pp. XX-XX.
[n] J. K. Jones, D. J. Dunning, F. Jackson, J. W. McKenzie, and P. H. Williams, “Simulations of the ALICE ERL”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPWA064, pp. 2265-2267.
[n] K. ?àhnberg, M. A. G. Johansson, P. F. Tavares, and L. Th, “MAX IV Storage Ring Magnet Installation Procedure”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 1234-1236. doi:10.18429/JACoW-NAPAC2016-THPOA64
[n] M. Jaski, “Eight-piece quadrupole magnet allows precise pole tip positioning”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper TUPR41, unpublished.
[n] K. Fujii et al., “25-70 MeV Variable Energy Cyclotron for Radio-Isotope Production”, in Proc. Cyclotrons'86, Tokyo, Japan, Oct. 1986, paper K-08, pp. 626-629.
[n] M. Kasa et al., “Measurement Results of the First Scape Prototype”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 3872-3874. doi:10.18429/JACoW-IPAC2021-THPAB054
For LaTeX
Use Complete Form
For BibTeX
References
- R. Bartolini et al., “Novel Lattice Upgrade Studies for Diamond Light Source”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPEA068, pp. 240-242.
- J. M. Brennan and M. Blaskiewicz, “Stochastic Cooling in RHIC”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE3GRI01, pp. 1910-1914.
- R. P. Walker, N. P. Hammond, J. Kay, S. P. Mhaskar, B. Singh, and R. Bartolini, “Study of the Possibility of Implementing a Superbend in the Diamond Light Source”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPC071, pp. 3059-3061.
- N. Cook et al., “An online analysis platform to facilitate analysis at X-ray light source”, presented at the 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPG83, unpublished.
- M. T. Heron, K. A. R. Baker, S. Lay, and P. D. Woods, “Use of Industrial Control Solutions in the Diamond Project”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper WP548, pp. XX-XX.
- D. P. Missiaen, J.-P. Quesnel, and R. J. Steinhagen, “The Alignment of the LHC”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE4GRC04, pp. 1973-1975.
- Y. Honda, “Development of CW Laser Wire in Storage Ring and Pulsed Laser Wire”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE3GRI03, pp. 1920-1924.
- A. C. Araujo Martinez, R. Agustsson, S. Kutsaev, A. Moro, A. Smirnov, and A. Aleksandrov, “First testing results of an improved multi-dimensional bunch shape monitor”, presented at the 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper MOCN3, unpublished.
- S. V. Kutsaev et al., “High-Gradient Accelerating Structure for Hadron Therapy Linac, Operating at kHz Repetition Rates”, in Proc. 31st Linear Accelerator Conf. (LINAC'22), Liverpool, UK, Aug.-Sep. 2022, pp. 126-129.
- K. Wootton et al., “A laser plasma wakefield electron accelerator for the Advanced Photon Source and Low-Energy Accelerator Facility”, presented at the 32nd Linear Accelerator Conf. (LINAC'24), Chicago, IL, USA, Aug. 2024, paper THPB002, unpublished.
- V. Komarova, L. Sevryukova, M. Tchernov, and I. Zvonarev, “The Influence of the Injection Energy on the Acceleration RF Structure Geometry and the Beam Dynamics of SVAAP”, in Proc. 8th Int. Conf. RF Superconductivity (SRF'97), Padova, Italy, Oct. 1997, paper SRF97A31, pp. 269-275.
- F. Furuta et al., “Progress and challenges in traveling-wave (TW) SRF cavity”, in Proc. 32nd Linear Accelerator Conf. (LINAC'24), Chicago, IL, USA, Aug. 2024, pp. 621-624.
- S. I. Bibko, I. K. Sedlyarov, and V. G. Veshtcherevich, “Superconducting RF Cavity for Factory”, in Proc. 5th Int. Conf. RF Superconductivity (SRF'91), Hamburg, Germany, Aug. 1991, paper SRF91E06, pp. XX-XX.
- M. Ferianis, “State of the Art in High-Stability Timing, Phase Reference Distribution and Synchronization Systems”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE3GRI02, pp. 1915-1919.
- M. Jaski, C. Doose, J. Humbert, K. Thompson, and R. Wright, “New Synchrotron Injection Septum Magnet at the APS”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPPH007, pp. 3230-3232.
- V. Sajaev et al., “First injection and lattice commissioning of APS upgrade storage ring”, presented at the 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPG08, unpublished.
- A. V. Burov, “Head-Tail Modes for Strong Space Charge”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE3PBI01, pp. 1889-1893.
- M. Borland, C. Doose, A. Jain, M. Jaski, and R. Lindberg, “Use of two- and three-dimensional magnetic measurement data to refine the APS upgrade model”, presented at the 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPC03, unpublished.
- Y. Verma, M. Aggarwal, V. J. Joshi, and A. Sharma, “Characterization Study of a Button BPM with an Approach to Automated Measurements”, in Proc. 9th Int. Beam Instrumentation Conf. (IBIC'20), Santos, Brazil, Sep. 2020, pp. 233-236.
- T. Nakagawa, “ECR Ion Sources: A Brief History and Look into the Next Generation”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE2GRI01, pp. 1861-1865.
- K. ?¢agar, Cosylab, Ljubljana, “Longevity of Accelerator Control Systems Middleware”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE1RAC04, pp. 1795-1797.
- N. Hiller et al., “Single-Shot Electro-Optical Diagnostics at the ANKA Storage Ring”, in Proc. 3rd Int. Beam Instrumentation Conf. (IBIC'14), Monterey, CA, USA, Sep. 2014, paper MOPD17, pp. 182-186.
- S. Wang et al., “Evolution of realistic beam distributions in space-charge-dominated electron beams”, presented at the 6th North American Particle Accelerator Conference (NAPAC'25), Sacramento, California, USA, Aug. 2025, paper SUP038, unpublished.
- Y. Kobayashi et al., “Recent Progress of the Operation at PF-Ring and PF-AR”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU5RFP031, pp. 1165-1167.
- Y. Funakoshi et al., “Recent Progress of KEKB”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE6PFP043, pp. 2588-2590.
- R. Monroy-Villa, F. Hug, T. Stengler, and I. Ben-Zvi, “Design of a fast reactive tuner for 1.3 GHz TESLA cavities at MESA”, in Proc. 22st International Conference on RF Superconductivity (SRF'25), Tokyo, Japan, Sep. 2025, paper THP81, pp. 797-803.
- A. A. Litvinov, I. K. Sedlyarov, and A. G. Tribendis, “Set-up for Nb Surface Quality Checking Using HC3”, in Proc. 3rd Int. Conf. RF Superconductivity (SRF'87), Lemont, IL, USA, Sep. 1987, paper SRF87F02, pp. XX-XX.
- M. T. F. Pivi, “Detailed Electron-Cloud Modeling with CMAD”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE1PBI01, pp. 1801-1801.
- A. Sharma, K. Åhnberg, L. Roslund, A. Andersson, P. Tavares, and A. Vorozhtsov, “Design overview and project status of the PM gradient dipole at MAX IV”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper MOP7164, this conference.
- S. Naknaimueang et al., “Design Studies for FLUTE, A Linac-based Source of Terahertz Radiation”, in Proc. 35th Int. Free Electron Laser Conf. (FEL'13), New York, NY, USA, Aug. 2013, paper WEPSO44, pp. 598-601.
- R. Kumar et al., “Exploring the potential of accelerator-based neutron generators in modern research”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper TUPB055, pp. 1088-1090.
- E. Todesco et al., “The Magnetic Model of the LHC in the Early Phase of Beam Commissioning”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOOCRA01, pp. 55-57.
- A. Schaller, J. Fitzek, D. Lorenz, and F. Wolf, “Optimized Calculation of Timing for Parallel Beam Operation at the FAIR Accelerator Complex”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 411-415.
- M. Borland, M. Jaski, and A. Jain, “Estimates of cross-talk effects for magnets of the Advanced Photon Source upgrade lattice”, presented at the 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPC02, unpublished.
- A. Sharma, R. K. Gangwar, and B. K. Sahu, “Design and Development of a Novel Stripline Fast Faraday Cup to Measure Ion Beam Profile”, in Proc. 9th Int. Beam Instrumentation Conf. (IBIC'20), Santos, Brazil, Sep. 2020, pp. 246-249.
- D. Blanc, “Integration of the Process Control Systems for the Automation of the LHC Cooling and Ventilation Plants”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper TU214, pp. XX-XX.
- J. K. Jones, D. J. Dunning, F. Jackson, J. W. McKenzie, and P. H. Williams, “Simulations of the ALICE ERL”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper WEPWA064, pp. 2265-2267.
- K. ?àhnberg, M. A. G. Johansson, P. F. Tavares, and L. Th, “MAX IV Storage Ring Magnet Installation Procedure”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 1234-1236.
- M. Jaski, “Eight-piece quadrupole magnet allows precise pole tip positioning”, presented at the 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPR41, unpublished.
- K. Fujii et al., “25-70 MeV Variable Energy Cyclotron for Radio-Isotope Production”, in Proc. 11th Int. Cyclotron Conf. and Their Applications (Cyclotrons'86), Tokyo, Japan, Oct. 1986, paper K-08, pp. 626-629.
- M. Kasa et al., “Measurement Results of the First Scape Prototype”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 3872-3874.
Back to search