Warning
Some papers titles are all uppercase, you must correct this before using this reference.
Some papers have malformed authors, please correct this before using these references.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] A. N. Ermakov et al., “Commissioning of High Efficiency Standing Wave Linac for Industrial Applications”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 99-101. doi:10.18429/JACoW-RUPAC2016-WECDMH01
[n] V. A. Puntus and G. V. Romanov, “Multipactoring in the Beam Phase Monitor at MMF”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP05D, pp. 1583-1585.
[n] L. E. Sakazaki, R. M. Littauer, R. H. Siemann, and R. M. Talman, “Anomalous"”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. -Nonlinearly-Current-Dependent-Damping-in-CESR".
[n] I. Lobov, A. Lutchev, M. N. Stolyarov, and S. A. Sukhov, “Software Service for Cryogenic Data Representation and Analysis”, in Proc. RuPAC'10, Protvino, Russia, Sep.-Oct. 2010, paper WEPSB040, pp. 263-265.
[n] C. Duncan, M. Kaemingk, M. Gordon, W. Li, A. Bartnik, and J. Maxson, “High angular magnification for accessing structural information in Ultrafast Electron Diffraction”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3140-3142. doi:10.18429/JACoW-IPAC2023-WEPL016
[n] M. Rabany, “Interfacing Industrial Process Control Systems to LEP/LHC”, in Proc. ICALEPCS'91, Tsukuba, Japan, Nov. 1991, pp. 269-273. doi:10.18429/JACoW-ICALEPCS1991-S07IC01
[n] C. Garino et al., “Intervention Management from Operation to Shutdown”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPWA035, pp. 3705-3707.
[n] E. Yamakawa et al., “Serpentine Acceleration in Scaling FFAG”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPS079, pp. 2691-2693.
[n] K. Saito et al., “L-Band Superconducting Cavities at KEK for TESLA”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1024-1027.
[n] P. Dolegieviez and R. Ferdinand, “Spiral2 Project Status”, in Proc. IPAC'20, Caen, France, May 2020, paper TUVIR12, pp. XX-XX.
[n] K. Howard, D. Bafia, W. Dziedzic-Misiewicz, Y.-K. Kim, and Z.-H. Sung, “Identifying the connections between grain growth and flux expulsion in low RRR niobium SRF cavities”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper WEPB017, unpublished.
[n] H. H. Lu, J. Dai, and J. J. Zhuang, “Research on the Undulator Used for PKU-FEL”, in Proc. FEL'04, Trieste, Italy, Aug.-Sep. 2004, paper TUPOS32, pp. XX-XX.
[n] D. Tong and X. Tao, “A Pass Band Performance Simulation Code of Coupled Cavities”, in Proc. LINAC'04, Lübeck, Germany, Aug. 2004, paper MOP70, pp. 183-185.
[n] S. Doebert et al., “High Power Test of an X-band Slotted-Iris Accelerator Structure at NLCTA”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEPMN070, pp. 2191-2193.
[n] M. Yoshimoto, “Development of the H0 Dump Branch Duct for the Additional Collimation System in J-PARC RCS”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper TUPS013, pp. 1545-1547.
[n] S. Hojo et al., “Present Status of Cyclotrons (NIRS-930, HM-18) at NIRS”, in Proc. Cyclotrons'13, Vancouver, Canada, Sep. 2013, paper MOPPT008, pp. 46-48.
[n] G. Franchetti and F. Zimmermann, “The Effect of Non-Zero Closed Orbit on Electron-Cloud Pinch Dynamics”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPR047, pp. 3033-3035.
[n] S. Shope et al., “RADLAC-II Upgrade Experiments”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper TH3-41, pp. 628-630.
[n] K. Howard, D. Bafia, Z.-H. Sung, W. Dziedzic-Misiewicz, and Y.-K. Kim, “Microscopic understanding of the effects of impurities in low RRR SRF cavities”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2829-2832. doi:10.18429/JACoW-IPAC2024-WEPS59
[n] V. G. Andreev et al., “Design Problems of High Energy CW Ion Linac”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper TH4-07, pp. 621-623.
[n] HE Chao-hui, YANG Hai-liang, GENG Bin, CHEN Xiao-hua, ZHANG Zheng-xuan, LI Guo-zheng, “EXPERIMENTAL STUDY ON SINGLE EVENT EFFECTS IN SEMICONDUCTOR DEVICES USING ACCELERATORS”, in Proc. APAC'01, Beijing, China, Sep. 2001, paper WEP081, pp. XX-XX.
[n] K. Hirosawa et al., “New RF Feedback System and Simulations for Suppression of Coupled-Bunch Instabilities at SuperKEKB”, in Proc. IBIC'17, Grand Rapids, MI, USA, Aug. 2017, pp. 292-294. doi:10.18429/JACoW-IBIC2017-TUPWC05
[n] D. J. Gibson, R. A. Marsh, and B. Rusnak, “Distributed Control Architecture for an Integrated Accelerator and Experimental System”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2268-2270. doi:10.18429/JACoW-IPAC2018-WEPAL043
[n] K. Ohmi, “Beam-beam Limit in a Hadron Collider”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THYB01, pp. 3208-3212.
[n] C. H. Huang, Y.-S. Cheng, P. C. Chiu, K. T. Hsu, K. H. Hu, and C. Y. Wu, “Methods to Detect Error Sources and Their Application at the TPS”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2305-2308. doi:10.18429/JACoW-IPAC2018-WEPAL057
[n] Y.-C. Chen, R. Agustsson, O. Chimalpopoca, and A. Schillaci, “Finalizing the multiphysics design of a high heat-load superconducting undulator”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper TUPM071, unpublished.
[n] R. J. Yang, P. Bambade, V. Kubytskyi, A. Faus-Golfe, N. Fuster-Martinez, and T. Naito, “Modeling and Experimental Studies of Beam Halo at ATF2”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 88-91. doi:10.18429/JACoW-IPAC2016-MOPMB008
[n] M. Yoshida et al., “Status of KEKB and Upgrade Plan to SuperKEKB”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper WEXMA01, pp. 280-284.
[n] D. M. Bacescu, L. Berman, S. Hulbert, B. Ocko, and Z. Yin, “A New Experimental Station for Liquid Interface X-Ray Scattering At NSLS-II Beamline 12-ID”, in Proc. MEDSI'20, Chicago, USA, Jul. 2021, pp. 330. doi:10.18429/JACoW-MEDSI2020-WEPC12
[n] R. M. Zwaska, S. E. Kopp, and W. Pellico, “Cycle-to-Cycle Extraction Synchronization of the Fermilab Booster for Multiple Batch Injection to the Main Injector”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper FPAE022, pp. 1802-1804.
[n] A. D. Ovsyannikov, D. A. Ovsyannikov, Y. A. Svistunov, and A. P. Durkin, “Acceleration of Deuterons and Protons in Single RFQ Strucrure”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 248-250. doi:10.18429/JACoW-RUPAC2016-TUPSA015
[n] D. Tronc, J. P. Georges, C. Perraudin, and A. Setty, “Electron Injector Designs for CERN-LEP, Rijksuniversiteit-Gent and Self-Focusing Linacs”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3246-3249.
[n] C. Meng et al., “Designs of High-intensity Proton Linacs with Non-equipartitioning”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3262-3264. doi:10.18429/JACoW-IPAC2014-THPME021
[n] S. Pokharel, A. S. Hofler, and G. A. Krafft, “Modeling a Nb?Sn Cryounit in GPT at UITF”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 576-579. doi:10.18429/JACoW-IPAC2022-MOPOTK051
[n] Z. Q. Li et al., “Design of the SSR021 Cavity for the Proton Accelerator Main Linac of China ADS”, in Proc. SRF'13, Paris, France, Sep. 2013, paper THP021, pp. 939-941.
[n] G. J. Waldschmidt et al., “High-Power Prototype Canon Coupler for APS-U Booster Cavities”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 3956-3958. doi:10.18429/JACoW-IPAC2021-THPAB081
[n] M. R. Shubaly, “High Current DC Ion Source Development at CNRL”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3065-3068.
[n] T. Aoki et al., “Development of an S-band Multi-cell Accelerating Cavity for RF Gun and Booster Linac”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPC020, pp. 110-112.
For LaTeX
Use Complete Form
For BibTeX
References
- A. N. Ermakov et al., “Commissioning of High Efficiency Standing Wave Linac for Industrial Applications”, in Proc. 25th Russian Particle Accelerator Conf. (RuPAC'16), Saint Petersburg, Russia, Nov. 2016, pp. 99-101.
- V. A. Puntus and G. V. Romanov, “Multipactoring in the Beam Phase Monitor at MMF”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper WEP05D, pp. 1583-1585.
- L. E. Sakazaki, R. M. Littauer, R. H. Siemann, and R. M. Talman, “Anomalous"”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. -Nonlinearly-Current-Dependent-Damping-in-CESR".
- I. Lobov, A. Lutchev, M. N. Stolyarov, and S. A. Sukhov, “Software Service for Cryogenic Data Representation and Analysis”, in Proc. 22nd Russian Particle Accelerator Conf. (RuPAC'10), Protvino, Russia, Sep.-Oct. 2010, paper WEPSB040, pp. 263-265.
- C. Duncan, M. Kaemingk, M. Gordon, W. Li, A. Bartnik, and J. Maxson, “High angular magnification for accessing structural information in Ultrafast Electron Diffraction”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPL016, pp. 3140-3142.
- M. Rabany, “Interfacing Industrial Process Control Systems to LEP/LHC”, in Proc. 3rd International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'91), Tsukuba, Japan, Nov. 1991, paper S07IC01, pp. 269-273.
- C. Garino et al., “Intervention Management from Operation to Shutdown”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper THPWA035, pp. 3705-3707.
- E. Yamakawa et al., “Serpentine Acceleration in Scaling FFAG”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper WEPS079, pp. 2691-2693.
- K. Saito et al., “L-Band Superconducting Cavities at KEK for TESLA”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 1024-1027.
- P. Dolegieviez and R. Ferdinand, “Spiral2 Project Status”, in Proc. 11th Int. Particle Accelerator Conf. (IPAC'20), Caen, France, May 2020, paper TUVIR12, pp. XX-XX.
- K. Howard, D. Bafia, W. Dziedzic-Misiewicz, Y.-K. Kim, and Z.-H. Sung, “Identifying the connections between grain growth and flux expulsion in low RRR niobium SRF cavities”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper WEPB017, this conference.
- H. H. Lu, J. Dai, and J. J. Zhuang, “Research on the Undulator Used for PKU-FEL”, in Proc. 26th Int. Free Electron Laser Conf. & 11th FEL Users Workshop (FEL'04), Trieste, Italy, Aug.-Sep. 2004, paper TUPOS32, pp. XX-XX.
- D. Tong and X. Tao, “A Pass Band Performance Simulation Code of Coupled Cavities”, in Proc. 22nd Linear Accelerator Conf. (LINAC'04), Lübeck, Germany, Aug. 2004, paper MOP70, pp. 183-185.
- S. Doebert et al., “High Power Test of an X-band Slotted-Iris Accelerator Structure at NLCTA”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper WEPMN070, pp. 2191-2193.
- M. Yoshimoto, “Development of the H0 Dump Branch Duct for the Additional Collimation System in J-PARC RCS”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper TUPS013, pp. 1545-1547.
- S. Hojo et al., “Present Status of Cyclotrons (NIRS-930, HM-18) at NIRS”, in Proc. 20th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'13), Vancouver, Canada, Sep. 2013, paper MOPPT008, pp. 46-48.
- G. Franchetti and F. Zimmermann, “The Effect of Non-Zero Closed Orbit on Electron-Cloud Pinch Dynamics”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEPPR047, pp. 3033-3035.
- S. Shope et al., “RADLAC-II Upgrade Experiments”, in Proc. 1988 Linear Accelerator Conf. (LINAC'88), Williamsburg, VA, USA, Oct. 1988, paper TH3-41, pp. 628-630.
- K. Howard, D. Bafia, Z.-H. Sung, W. Dziedzic-Misiewicz, and Y.-K. Kim, “Microscopic understanding of the effects of impurities in low RRR SRF cavities”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper WEPS59, pp. 2829-2832.
- V. G. Andreev et al., “Design Problems of High Energy CW Ion Linac”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper TH4-07, pp. 621-623.
- HE Chao-hui, YANG Hai-liang, GENG Bin, CHEN Xiao-hua, ZHANG Zheng-xuan, LI Guo-zheng, “EXPERIMENTAL STUDY ON SINGLE EVENT EFFECTS IN SEMICONDUCTOR DEVICES USING ACCELERATORS”, in Proc. 2nd Asian Particle Accelerator Conf. (APAC'01), Beijing, China, Sep. 2001, paper WEP081, pp. XX-XX.
- K. Hirosawa et al., “New RF Feedback System and Simulations for Suppression of Coupled-Bunch Instabilities at SuperKEKB”, in Proc. 6th Int. Beam Instrumentation Conf. (IBIC'17), Grand Rapids, MI, USA, Aug. 2017, pp. 292-294.
- D. J. Gibson, R. A. Marsh, and B. Rusnak, “Distributed Control Architecture for an Integrated Accelerator and Experimental System”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2268-2270.
- K. Ohmi, “Beam-beam Limit in a Hadron Collider”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THYB01, pp. 3208-3212.
- C. H. Huang, Y.-S. Cheng, P. C. Chiu, K. T. Hsu, K. H. Hu, and C. Y. Wu, “Methods to Detect Error Sources and Their Application at the TPS”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2305-2308.
- Y.-C. Chen, R. Agustsson, O. Chimalpopoca, and A. Schillaci, “Finalizing the multiphysics design of a high heat-load superconducting undulator”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper TUPM071, this conference.
- R. J. Yang, P. Bambade, V. Kubytskyi, A. Faus-Golfe, N. Fuster-Martinez, and T. Naito, “Modeling and Experimental Studies of Beam Halo at ATF2”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 88-91.
- M. Yoshida et al., “Status of KEKB and Upgrade Plan to SuperKEKB”, in Proc. 4th Asian Particle Accelerator Conf. (APAC'07), Indore, India, Jan.-Feb. 2007, paper WEXMA01, pp. 280-284.
- D. M. Bacescu, L. Berman, S. Hulbert, B. Ocko, and Z. Yin, “A New Experimental Station for Liquid Interface X-Ray Scattering At NSLS-II Beamline 12-ID”, in Proc. 11th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'20), Chicago, USA, Jul. 2021, pp. 330.
- R. M. Zwaska, S. E. Kopp, and W. Pellico, “Cycle-to-Cycle Extraction Synchronization of the Fermilab Booster for Multiple Batch Injection to the Main Injector”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper FPAE022, pp. 1802-1804.
- A. D. Ovsyannikov, D. A. Ovsyannikov, Y. A. Svistunov, and A. P. Durkin, “Acceleration of Deuterons and Protons in Single RFQ Strucrure”, in Proc. 25th Russian Particle Accelerator Conf. (RuPAC'16), Saint Petersburg, Russia, Nov. 2016, pp. 248-250.
- D. Tronc, J. P. Georges, C. Perraudin, and A. Setty, “Electron Injector Designs for CERN-LEP, Rijksuniversiteit-Gent and Self-Focusing Linacs”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 3246-3249.
- C. Meng et al., “Designs of High-intensity Proton Linacs with Non-equipartitioning”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3262-3264.
- S. Pokharel, A. S. Hofler, and G. A. Krafft, “Modeling a Nb?Sn Cryounit in GPT at UITF”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 576-579.
- Z. Q. Li et al., “Design of the SSR021 Cavity for the Proton Accelerator Main Linac of China ADS”, in Proc. 16th Int. Conf. RF Superconductivity (SRF'13), Paris, France, Sep. 2013, paper THP021, pp. 939-941.
- G. J. Waldschmidt et al., “High-Power Prototype Canon Coupler for APS-U Booster Cavities”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 3956-3958.
- M. R. Shubaly, “High Current DC Ion Source Development at CNRL”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3065-3068.
- T. Aoki et al., “Development of an S-band Multi-cell Accelerating Cavity for RF Gun and Booster Linac”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper MOPC020, pp. 110-112.
Back to search