Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] D. A. Kogut, S. Fadeev, and N. K. Kuksanov, “Improving of Uniformity of the Electron-Beam Treatment of Materials by ELV Accelerators”, in Proc. RuPAC'12, Saint Petersburg, Russia, Sep. 2012, paper WEPPC056, pp. 557-559.
[n] M. Ben Abdillah, P. Blache, F. Fournier, and H. Kraft, “Development of a Low-beta BPM for MYRTE Project”, in Proc. IBIC'19, Malmö, Sweden, Sep. 2019, pp. 504-507. doi:10.18429/JACoW-IBIC2019-WEPP002
[n] D. A. Kogut, S. Fadeev, N. K. Kuksanov, P. I. Nemytov, and R. A. Salimov, “Extended Scope of Application of Industrial ELV Accelerator”, in Proc. RuPAC'14, Obninsk, Russia, Oct. 2014, paper WECA06, pp. 137-139.
[n] V. Maior, V. Dorokhov, O. Meshkov, and M. Timoshenko, “Measurement of the radiation damping time via optical methods”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 2766-2769. doi:10.18429/JACoW-IPAC2025-THPM038
[n] D. Gamba, A. Rossi, G. Russo, and P. Kruyt, “Specifications for a new electron cooler of the antiproton decelerator at CERN”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2241-2244. doi:10.18429/JACoW-IPAC2023-TUPM027
[n] A. G. Valentinov et al., “Status of the Kurchatov Synchrotron Radiation Source”, in Proc. RuPAC2021, Alushta, Crimea, Sep.-Oct. 2021, pp. 55-57. doi:10.18429/JACoW-RuPAC2021-TUC01
[n] J. Wieland and A. Romanov, “Sextupole misalignment and defect identification and remediation in IOTA”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1527-1530. doi:10.18429/JACoW-IPAC2024-TUPR48
[n] A. Pires, A.-S. Chauchat, M. Collet, V. Le Flanchec, and N. Delerue, “Emittance growth study of an electron beam in a double-alpha magnet compressor used in an Inverse Compton Scattering X-ray source”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2154-2157. doi:10.18429/JACoW-IPAC2023-TUPL172
[n] C. Pillai et al., “The LANSCE Low Momentum Beam Monitor”, in Proc. LINAC'04, Lübeck, Germany, Aug. 2004, paper TUP68, pp. 423-425.
[n] A. Malyzhenkov et al., “Experimental generation of the transversely uniform electron bunches at the CLEAR facility at CERN”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2009-2012. doi:10.18429/JACoW-IPAC2023-TUPL119
[n] O. Belikov, V. Kozak, and A. Medvedko, “FOUR-QUADRANT POWER SUPPLIES FOR STEERING ELECTROMAGNETS FOR ELECTRON-POSITRON COLLIDERS”, in Proc. RuPAC'08, Zvenigorod, Russia, Sep.-Oct. 2008, paper WEBAU03, pp. XX-XX.
[n] R. D?Âlling and J. Brutscher, “Fast Recharging of Electrostatic Injection and Extraction Septa After Breakdown”, in Proc. Cyclotrons'19, Cape Town, South Africa, Sep. 2019, pp. 90-93. doi:10.18429/JACoW-CYCLOTRONS2019-MOP025
[n] R. P. Nunes, A. Bonatto, E. P. Maldonado, R. E. Samad, and N. D. Vieira, “Laser Pulse Dynamics in the Self-Modulated Regime”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 1721-1724. doi:10.18429/JACoW-IPAC2021-TUPAB143
[n] X. Wu et al., “Installation, operations, and upgrade of a CS-30 cyclotron for the production of alpha emitters At-211 and Ac-225 at the Ionetix TAT facility”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 1075-1078. doi:10.18429/JACoW-IPAC2025-TUPB048
[n] T. Raubenheimer et al., “Collective Effects in the NLC Damping Ring Designs”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TPQ16, pp. 2986-2988.
[n] M. Boscolo, M. Antonelli, and S. Guiducci, “Simulations and Measurements of the Touschek Background at DAFNE”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper WEPLE030, pp. 1238-1240.
[n] H. G. Blosser, D. A. Johnson, R. J. Burleigh, R. C. Niemann, and J. R. Purcell, “Superconducting Cyclotrons (Invited paper)”, in Proc. Cyclotrons'75, Zurich, Switzerland, Aug. 1975, paper I-03, pp. 584-594.
[n] T. Hattori et al., “Design of an 80-MHz RFQ Linac for Heavy Ions”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 3115-3118.
[n] M. Cavenago, T. Kulevoy, and S. Petrenko, “Operation Experience of the Alice Ion Source”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper THPRI010, pp. 1694-1696.
[n] D. Samoilenko et al., “First beam heating with the laser heater for FLASH2020+”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1950-1953. doi:10.18429/JACoW-IPAC2023-TUPL098
[n] J. Wieland and A. Romanov, “Injection simulations of space charge dominated proton beams in IOTA”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 995-998. doi:10.18429/JACoW-IPAC2025-TUPB020
[n] S. J. Huang, Y. H. Chang, Y. W. Chen, and T. Y. Chung, “Using Linear Regression to Model the Parameters of the Flat Wires in TLS-EPU56”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 4399-4402. doi:10.18429/JACoW-IPAC2021-THPAB311
[n] S. Mohanty et al., “Development and operational performance of multi-alkali antimonide photocathodes”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 1578-1581. doi:10.18429/JACoW-IPAC2025-TUPS067
[n] B. Leblond, C. Travier, P. Georges, and P. Thomas, “CANDELA Photo-injector: The Drive Laser”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 3053-3055.
[n] X. Wu et al., “Design and Manufacture of Solenoid Center Deviation Measurement Device”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 4366-4369. doi:10.18429/JACoW-IPAC2021-THPAB289
[n] I. Makarov et al., “First Test of the X-Band Pulsed Magnicon”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2650-2653.
[n] X. Rao, N. Bultman, S. Miller, P. Ostroumov, and A. Plastun, “Design and fabrication of FRIB normal conducting cavities”, in Proc. HIAT'25, East Lansing, MI, USA, Jun. 2025, pp. 16-19. doi:10.18429/JACoW-HIAT2025-MOB03
[n] A. Pietryla, W. Berg, and R. Merl, “A Cerenkov Radiation Detection System for the Advanced Photon Source Storage Ring”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPAH304, pp. 1622-1624.
For LaTeX
Use Complete Form
For BibTeX
References
- D. A. Kogut, S. Fadeev, and N. K. Kuksanov, “Improving of Uniformity of the Electron-Beam Treatment of Materials by ELV Accelerators”, in Proc. 23rd Russian Particle Accelerator Conf. (RuPAC'12), Saint Petersburg, Russia, Sep. 2012, paper WEPPC056, pp. 557-559.
- M. Ben Abdillah, P. Blache, F. Fournier, and H. Kraft, “Development of a Low-beta BPM for MYRTE Project”, in Proc. 8th Int. Beam Instrumentation Conf. (IBIC'19), Malmö, Sweden, Sep. 2019, pp. 504-507.
- D. A. Kogut, S. Fadeev, N. K. Kuksanov, P. I. Nemytov, and R. A. Salimov, “Extended Scope of Application of Industrial ELV Accelerator”, in Proc. 24th Russian Particle Accelerator Conf. (RuPAC'14), Obninsk, Russia, Oct. 2014, paper WECA06, pp. 137-139.
- V. Maior, V. Dorokhov, O. Meshkov, and M. Timoshenko, “Measurement of the radiation damping time via optical methods”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper THPM038, pp. 2766-2769.
- D. Gamba, A. Rossi, G. Russo, and P. Kruyt, “Specifications for a new electron cooler of the antiproton decelerator at CERN”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPM027, pp. 2241-2244.
- A. G. Valentinov et al., “Status of the Kurchatov Synchrotron Radiation Source”, in Proc. 27th Russian Particle Accelerator Conference (RuPAC2021), Alushta, Crimea, Sep.-Oct. 2021, pp. 55-57.
- J. Wieland and A. Romanov, “Sextupole misalignment and defect identification and remediation in IOTA”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPR48, pp. 1527-1530.
- A. Pires, A.-S. Chauchat, M. Collet, V. Le Flanchec, and N. Delerue, “Emittance growth study of an electron beam in a double-alpha magnet compressor used in an Inverse Compton Scattering X-ray source”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPL172, pp. 2154-2157.
- C. Pillai et al., “The LANSCE Low Momentum Beam Monitor”, in Proc. 22nd Linear Accelerator Conf. (LINAC'04), Lübeck, Germany, Aug. 2004, paper TUP68, pp. 423-425.
- A. Malyzhenkov et al., “Experimental generation of the transversely uniform electron bunches at the CLEAR facility at CERN”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPL119, pp. 2009-2012.
- O. Belikov, V. Kozak, and A. Medvedko, “FOUR-QUADRANT POWER SUPPLIES FOR STEERING ELECTROMAGNETS FOR ELECTRON-POSITRON COLLIDERS”, in Proc. 21st Russian Particle Accelerator Conf. (RuPAC'08), Zvenigorod, Russia, Sep.-Oct. 2008, paper WEBAU03, pp. XX-XX.
- R. D?Âlling and J. Brutscher, “Fast Recharging of Electrostatic Injection and Extraction Septa After Breakdown”, in Proc. 22nd Int. Conf. on Cyclotrons and their Applications (Cyclotrons'19), Cape Town, South Africa, Sep. 2019, pp. 90-93.
- R. P. Nunes, A. Bonatto, E. P. Maldonado, R. E. Samad, and N. D. Vieira, “Laser Pulse Dynamics in the Self-Modulated Regime”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 1721-1724.
- X. Wu et al., “Installation, operations, and upgrade of a CS-30 cyclotron for the production of alpha emitters At-211 and Ac-225 at the Ionetix TAT facility”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper TUPB048, pp. 1075-1078.
- T. Raubenheimer et al., “Collective Effects in the NLC Damping Ring Designs”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper TPQ16, pp. 2986-2988.
- M. Boscolo, M. Antonelli, and S. Guiducci, “Simulations and Measurements of the Touschek Background at DAFNE”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper WEPLE030, pp. 1238-1240.
- H. G. Blosser, D. A. Johnson, R. J. Burleigh, R. C. Niemann, and J. R. Purcell, “Superconducting Cyclotrons (Invited paper)”, in Proc. 7th Int. Cyclotron Conf. (Cyclotrons'75), Zurich, Switzerland, Aug. 1975, paper I-03, pp. 584-594.
- T. Hattori et al., “Design of an 80-MHz RFQ Linac for Heavy Ions”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 3115-3118.
- M. Cavenago, T. Kulevoy, and S. Petrenko, “Operation Experience of the Alice Ion Source”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper THPRI010, pp. 1694-1696.
- D. Samoilenko et al., “First beam heating with the laser heater for FLASH2020+”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPL098, pp. 1950-1953.
- J. Wieland and A. Romanov, “Injection simulations of space charge dominated proton beams in IOTA”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper TUPB020, pp. 995-998.
- S. J. Huang, Y. H. Chang, Y. W. Chen, and T. Y. Chung, “Using Linear Regression to Model the Parameters of the Flat Wires in TLS-EPU56”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 4399-4402.
- S. Mohanty et al., “Development and operational performance of multi-alkali antimonide photocathodes”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper TUPS067, pp. 1578-1581.
- B. Leblond, C. Travier, P. Georges, and P. Thomas, “CANDELA Photo-injector: The Drive Laser”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 3053-3055.
- X. Wu et al., “Design and Manufacture of Solenoid Center Deviation Measurement Device”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 4366-4369.
- I. Makarov et al., “First Test of the X-Band Pulsed Magnicon”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 2650-2653.
- X. Rao, N. Bultman, S. Miller, P. Ostroumov, and A. Plastun, “Design and fabrication of FRIB normal conducting cavities”, in Proc. 16th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'25), East Lansing, MI, USA, Jun. 2025, paper MOB03, pp. 16-19.
- A. Pietryla, W. Berg, and R. Merl, “A Cerenkov Radiation Detection System for the Advanced Photon Source Storage Ring”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TPAH304, pp. 1622-1624.
Back to search