Warning
Some papers titles are all uppercase, you must correct this before using this reference.
Some papers have malformed authors, please correct this before using these references.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] G. G. Gulbekyan et al., “The Project of the HV Axial Injection for the DC-280 Cyclotron at the FLNR JINR”, in Proc. RuPAC'14, Obninsk, Russia, Oct. 2014, paper THPSC08, pp. 333-335.
[n] W. Singer et al., “Hydro Forming of NbCu Clad Cavities at DESY”, in Proc. SRF'01, Tsukuba, Japan, Sep. 2001, paper PT006, pp. XX-XX.
[n] Daneels A., Salter W., “What is SCADA?”, in Proc. ICALEPCS'99, Trieste, Italy, Oct. 1999, paper MC1I01, pp. XX-XX.
[n] Y. B. Yan et al., “Data Acquisition System for Beam Instrumentation of SXFEL and DCLS”, in Proc. IBIC'18, Shanghai, China, Sep. 2018, pp. 137-139. doi:10.18429/JACoW-IBIC2018-MOPC11
[n] S. Bernal, B. L. Beaudoin, R. A. Kishek, P. G. O, M. Reiser, and D. F. Sutter, “Low-current, Space-Charge Dominated Beam Transport at the University of Maryland Electron Ring (UMER)”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPAS030, pp. 3561-3563.
[n] I. V. Agapov et al., “Status of the PETRA IV project”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1404-1407. doi:10.18429/JACoW-IPAC2019-TUPGW011
[n] H. Du, Q. Y. Kong, Z. S. Li, K. D. Wang, and X. Yin, “RF Design and Cold Model Measurement of an IH-DTL for HIMM Injector”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 329-331. doi:10.18429/JACoW-LINAC2018-TUPO004
[n] I. Ben-Zvi et al., “RHIC Electron Cooler”, in Proc. LINAC'04, Lübeck, Germany, Aug. 2004, paper MOP29, pp. 102-104.
[n] J. A. D. Flowerdew, D. J. Kelliher, S. Machida, and S. L. Sheehy, “Simulating Quasi-Integrable Optics with Space Charge in the IBEX Paul Trap”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 2040-2043. doi:10.18429/JACoW-IPAC2022-WEPOTK007
[n] J. M. Brennan and M. Blaskiewicz, “Stochastic Cooling in RHIC”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE3GRI01, pp. 1910-1914.
[n] H. Schlarb et al., “First Operation of the FLASH Machine Protection System with Long Bunch Trains”, in Proc. LINAC'06, Knoxville, TN, USA, Aug. 2006, paper TUP009, pp. 262-264.
[n] M. Tawada, M. Kikuchi, T. Mimashi, S. Nagahashi, and A. Ueda, “Development of Pulsed Bending Magnet for Simultaneous Top-Up Injection to KEKB and PF Ring”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper MO6PFP019, pp. 175-177.
[n] K. C. Harkay, A. Nassiri, J. J. Song, Y. W. Kang, and R. L. Kustom, “Compensation of Longitudinal Coupled-Bunch Instability in the Advanced Photon Source Storage Ring”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 2V001, pp. 1575-1577.
[n] A. Fabris et al., “Progress of the S-Band RF Systems of the FERMI@Elettra Linac”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE5PFP022, pp. 2039-2041.
[n] R. Risler et al., “25 Years of Continuous Operation of the Seattle Clinical Cyclotron Facility”, in Proc. Cyclotrons'10, Lanzhou, China, Sep. 2010, paper MOPCP011, pp. 66-68.
[n] K. Hosoyama et al., “Crab Cavity for KEKB”, in Proc. SRF'95, Gif-sur-Yvette, France, Oct. 1995, paper SRF95F25, pp. 671-675.
[n] P. Fernandez Carmona et al., “Development of a PXI Based Test Stand for Automatization of the Quality Assurance of the Patient Safety System in a Proton Therapy Centre”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1604-1607. doi:10.18429/JACoW-ICALEPCS2017-THPHA098
[n] N. J. Sammut et al., “A Demonstration Experiment for the Forecast of Magnetic Field and Field Errors in the Large Hadron Collider”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPD033, pp. 2482-2484.
[n] T. L. Larter et al., “Design and Implementation of a Production Model Bias Tee”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2339-2341. doi:10.18429/JACoW-IPAC2021-TUPAB355
[n] M. Nagase, K. Shimizu, H. Takebe, and T. Wada, “Program for Controlling Magnet Power Supplies of the RIKEN Ring Cyclotron”, in Proc. Cyclotrons'86, Tokyo, Japan, Oct. 1986, paper I4-02, pp. 410-413.
[n] J. Dilly, M. Giovannozzi, R. Tom?ís Garc?¡a, and F. F. Van der Veken, “Corrections of Systematic Normal Decapole Field Errors in the HL-LHC Separation/Recombination Dipoles”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 1991-1994. doi:10.18429/JACoW-IPAC2022-WEPOPT059
[n] S. A. Macdonell, “Application of Industry Recognised Development Tools and Methodologies, such as Six Sigma to Facilitate the Efficient Delivery of Innovative and Robust Engineering Solutions at Synchrotron Facilities”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 184-188. doi:10.18429/JACoW-MEDSI2018-WEOPMA05
[n] A. Deshpande, K. Anderson, and V. Sidorov, “Optimization of a welding procedure for making critical aluminum welds on the LBNF absorber core block”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1754-1757. doi:10.18429/JACoW-IPAC2024-TUPS43
[n] L. Giannessi et al., “Analysis of the Process of Amplification in a Single Pass FEL of High Order Harmonics Generated in a Gas Jet”, in Proc. FEL'06, Berlin, Germany, Aug.-Sep. 2006, paper MOCAU05, pp. 248-251.
[n] P. J. Chou et al., “Reduction of Beam Induced RF-Heating in the Horizontal Stripline Kicker at the TPS”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 4035-4038. doi:10.18429/JACoW-IPAC2019-THPRB092
[n] Y. Funakoshi, “A Machine Study on the No-Interleaved Sextupole Scheme”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1045-1048.
[n] H. Harada, H. Hotchi, S. I. Meigo, P. K. Saha, and F. Tamura, “Dynamic Correction of Extraction Beam Displacement by Field Ringing of Extraction Pulsed Kicker Magnets in the J-PARC 3-GeV RCS”, in Proc. HB'14, East Lansing, MI, USA, Nov. 2014, paper THO3AB02, pp. 389-393.
[n] V. Andreev, H. Ao, G. Bisoffi, and K. W. Shepard, “Design of the Fast Tuner Loop for Superconducting RFQs at INFN-LNL”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP6B10, pp. 2013-2015.
[n] A. N. Didenko et al., “Neutron Accelerating Tubes with Microwave Deuterons Source Using Electron-cyclotron Resonance Effect”, in Proc. RuPAC'14, Obninsk, Russia, Oct. 2014, paper THPSC50, pp. 441-443.
[n] P. M. Strubin and N. Fietier, “Using Distributed Intelligence to Control the Vacuum System of a Very Large Accelerator”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 863-866.
[n] K. Escherich, N. Krupka, A. Matheisen, B. Petersen, and M. Schm?Âkel, “Clean-Room Facilities for High Gradient Resonator Preparation”, in Proc. SRF'05, Ithaca, NY, USA, Jul. 2005, paper THP14, pp. 486-488.
[n] Q. Chen et al., “SSPA upgrade plan design for CiADS”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 990-993. doi:10.18429/JACoW-IPAC2019-MOPTS057
[n] P. Briand et al., “Production of High Current-High Charge States Ion Beams with the Superconducting ECR Ion Source SERSE”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUO01B, pp. 287-289.
[n] R. A. Marsh, S. G. Anderson, D. J. Gibson, J. Hall, and B. Rusnak, “Fluorescence-Based Imaging Diagnostic for High Average Power Deuteron Beam”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2777-2779. doi:10.18429/JACoW-IPAC2019-WEPGW120
[n] D. Jeon and J. Galambos, “Phase Law of a High Intensity Superconducting Linac”, in Proc. LINAC'08, Victoria, Canada, Sep.-Oct. 2008, paper MOP108, pp. 328-330.
[n] S. Bilgen, “Electron stimulated desorption using a Compton electron beam on PHIL facility”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper TUPR67, unpublished.
[n] N. G. Reshetnyak, N. Aizatsky, A. Dovbnya, N. A. Dovbnya, V. V. Mytrochenko, and V. Zakutin, “Characteristics of Electron Beam Produced by Magnetron Diode with a Secondary-Emission Cathode”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPPE052, pp. 3197-3199.
[n] M. Castellano, L. Catani, A. Cianchi, M. Geitz, G. Orlandi, and V. Verzilov, “Bunch Length Measurements at TTF using Coherent Diffraction Radiation”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP5B05, pp. 1699-1701.
[n] L. G. Yan, D. R. Deng, and J. Wang, “The Mini-Period Permanent Magnet Staggered Undulator for Compact X-Ray Free Electron Laser”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1797-1800. doi:10.18429/JACoW-IPAC2019-TUPRB052
[n] K. Hwang, C. E. Mitchell, and R. D. Ryne, “Analysis of the Chromatic Vertical Focusing Effect of Dipole Fringe Fields”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 760-762. doi:10.18429/JACoW-IPAC2021-MOPAB234
[n] D. Leitner, “FIRST RESULTS FOR THE 28 GHZ OPERATION OF THE SUPERCONDUCTING ECR ION SOURCE VENUS”, in Proc. Cyclotrons'04, Tokyo, Japan, Oct. 2004, paper 19A6, pp. XX-XX.
[n] A. D. Kovalenko et al., “Design of a Fast Cycled Low Loss 6 T Model Dipole Cooling at 1.9 K”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 4221-4223. doi:10.18429/JACoW-IPAC2019-THPTS053
[n] L. K. Nguyen, “Pointing Stabilization Algorithms Explored and Implemented with the Low Energy RHIC Electron Cooling Laser”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 3336-3339. doi:10.18429/JACoW-IPAC2021-WEPAB290
[n] F. Meot, “High Brightness Low Frequency SR From a 2/g Deviation ID”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP03B, pp. 2324-2326.
[n] A. Sessler and J. S. Wurtele, “Constraints on Laser-Driven Accelerators for a High Energy Linear Collider”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEP083G, pp. 845-847.
[n] X. Serra-Gallifa et al., “Fast Orbit Feedback Implementation at Alba Synchrotron”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper THPPC115, pp. 1328-1330.
[n] N. Nakamura et al., “Specifications and Performance of a Chicane Magnet for the cERL IR-FEL”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 1512-1514. doi:10.18429/JACoW-IPAC2021-TUPAB064
For LaTeX
Use Complete Form
For BibTeX
References
- G. G. Gulbekyan et al., “The Project of the HV Axial Injection for the DC-280 Cyclotron at the FLNR JINR”, in Proc. 24th Russian Particle Accelerator Conf. (RuPAC'14), Obninsk, Russia, Oct. 2014, paper THPSC08, pp. 333-335.
- W. Singer et al., “Hydro Forming of NbCu Clad Cavities at DESY”, in Proc. 10th Workshop RF Superconductivity (SRF'01), Tsukuba, Japan, Sep. 2001, paper PT006, pp. XX-XX.
- Daneels A., Salter W., “What is SCADA?”, in Proc. 7th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'99), Trieste, Italy, Oct. 1999, paper MC1I01, pp. XX-XX.
- Y. B. Yan et al., “Data Acquisition System for Beam Instrumentation of SXFEL and DCLS”, in Proc. 7th Int. Beam Instrumentation Conf. (IBIC'18), Shanghai, China, Sep. 2018, pp. 137-139.
- S. Bernal, B. L. Beaudoin, R. A. Kishek, P. G. O, M. Reiser, and D. F. Sutter, “Low-current, Space-Charge Dominated Beam Transport at the University of Maryland Electron Ring (UMER)”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPAS030, pp. 3561-3563.
- I. V. Agapov et al., “Status of the PETRA IV project”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1404-1407.
- H. Du, Q. Y. Kong, Z. S. Li, K. D. Wang, and X. Yin, “RF Design and Cold Model Measurement of an IH-DTL for HIMM Injector”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 329-331.
- I. Ben-Zvi et al., “RHIC Electron Cooler”, in Proc. 22nd Linear Accelerator Conf. (LINAC'04), Lübeck, Germany, Aug. 2004, paper MOP29, pp. 102-104.
- J. A. D. Flowerdew, D. J. Kelliher, S. Machida, and S. L. Sheehy, “Simulating Quasi-Integrable Optics with Space Charge in the IBEX Paul Trap”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 2040-2043.
- J. M. Brennan and M. Blaskiewicz, “Stochastic Cooling in RHIC”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE3GRI01, pp. 1910-1914.
- H. Schlarb et al., “First Operation of the FLASH Machine Protection System with Long Bunch Trains”, in Proc. 23rd Linear Accelerator Conf. (LINAC'06), Knoxville, TN, USA, Aug. 2006, paper TUP009, pp. 262-264.
- M. Tawada, M. Kikuchi, T. Mimashi, S. Nagahashi, and A. Ueda, “Development of Pulsed Bending Magnet for Simultaneous Top-Up Injection to KEKB and PF Ring”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper MO6PFP019, pp. 175-177.
- K. C. Harkay, A. Nassiri, J. J. Song, Y. W. Kang, and R. L. Kustom, “Compensation of Longitudinal Coupled-Bunch Instability in the Advanced Photon Source Storage Ring”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 2V001, pp. 1575-1577.
- A. Fabris et al., “Progress of the S-Band RF Systems of the FERMI@Elettra Linac”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE5PFP022, pp. 2039-2041.
- R. Risler et al., “25 Years of Continuous Operation of the Seattle Clinical Cyclotron Facility”, in Proc. 19th Int. Conf. on Cyclotrons and their Applications (Cyclotrons'10), Lanzhou, China, Sep. 2010, paper MOPCP011, pp. 66-68.
- K. Hosoyama et al., “Crab Cavity for KEKB”, in Proc. 7th Int. Conf. RF Superconductivity (SRF'95), Gif-sur-Yvette, France, Oct. 1995, paper SRF95F25, pp. 671-675.
- P. Fernandez Carmona et al., “Development of a PXI Based Test Stand for Automatization of the Quality Assurance of the Patient Safety System in a Proton Therapy Centre”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1604-1607.
- N. J. Sammut et al., “A Demonstration Experiment for the Forecast of Magnetic Field and Field Errors in the Large Hadron Collider”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPD033, pp. 2482-2484.
- T. L. Larter et al., “Design and Implementation of a Production Model Bias Tee”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 2339-2341.
- M. Nagase, K. Shimizu, H. Takebe, and T. Wada, “Program for Controlling Magnet Power Supplies of the RIKEN Ring Cyclotron”, in Proc. 11th Int. Cyclotron Conf. and Their Applications (Cyclotrons'86), Tokyo, Japan, Oct. 1986, paper I4-02, pp. 410-413.
- J. Dilly, M. Giovannozzi, R. Tom?ís Garc?¡a, and F. F. Van der Veken, “Corrections of Systematic Normal Decapole Field Errors in the HL-LHC Separation/Recombination Dipoles”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 1991-1994.
- S. A. Macdonell, “Application of Industry Recognised Development Tools and Methodologies, such as Six Sigma to Facilitate the Efficient Delivery of Innovative and Robust Engineering Solutions at Synchrotron Facilities”, in Proc. 10th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'18), Paris, France, Jun. 2018, pp. 184-188.
- A. Deshpande, K. Anderson, and V. Sidorov, “Optimization of a welding procedure for making critical aluminum welds on the LBNF absorber core block”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPS43, pp. 1754-1757.
- L. Giannessi et al., “Analysis of the Process of Amplification in a Single Pass FEL of High Order Harmonics Generated in a Gas Jet”, in Proc. 28th Int. Free Electron Laser Conf. (FEL'06), Berlin, Germany, Aug.-Sep. 2006, paper MOCAU05, pp. 248-251.
- P. J. Chou et al., “Reduction of Beam Induced RF-Heating in the Horizontal Stripline Kicker at the TPS”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 4035-4038.
- Y. Funakoshi, “A Machine Study on the No-Interleaved Sextupole Scheme”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1045-1048.
- H. Harada, H. Hotchi, S. I. Meigo, P. K. Saha, and F. Tamura, “Dynamic Correction of Extraction Beam Displacement by Field Ringing of Extraction Pulsed Kicker Magnets in the J-PARC 3-GeV RCS”, in Proc. 54th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'14), East Lansing, MI, USA, Nov. 2014, paper THO3AB02, pp. 389-393.
- V. Andreev, H. Ao, G. Bisoffi, and K. W. Shepard, “Design of the Fast Tuner Loop for Superconducting RFQs at INFN-LNL”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper THP6B10, pp. 2013-2015.
- A. N. Didenko et al., “Neutron Accelerating Tubes with Microwave Deuterons Source Using Electron-cyclotron Resonance Effect”, in Proc. 24th Russian Particle Accelerator Conf. (RuPAC'14), Obninsk, Russia, Oct. 2014, paper THPSC50, pp. 441-443.
- P. M. Strubin and N. Fietier, “Using Distributed Intelligence to Control the Vacuum System of a Very Large Accelerator”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 863-866.
- K. Escherich, N. Krupka, A. Matheisen, B. Petersen, and M. Schm?Âkel, “Clean-Room Facilities for High Gradient Resonator Preparation”, in Proc. 12th Int. Conf. RF Superconductivity (SRF'05), Ithaca, NY, USA, Jul. 2005, paper THP14, pp. 486-488.
- Q. Chen et al., “SSPA upgrade plan design for CiADS”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 990-993.
- P. Briand et al., “Production of High Current-High Charge States Ion Beams with the Superconducting ECR Ion Source SERSE”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper TUO01B, pp. 287-289.
- R. A. Marsh, S. G. Anderson, D. J. Gibson, J. Hall, and B. Rusnak, “Fluorescence-Based Imaging Diagnostic for High Average Power Deuteron Beam”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2777-2779.
- D. Jeon and J. Galambos, “Phase Law of a High Intensity Superconducting Linac”, in Proc. 24th Linear Accelerator Conf. (LINAC'08), Victoria, Canada, Sep.-Oct. 2008, paper MOP108, pp. 328-330.
- S. Bilgen, “Electron stimulated desorption using a Compton electron beam on PHIL facility”, presented at the 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPR67, unpublished.
- N. G. Reshetnyak, N. Aizatsky, A. Dovbnya, N. A. Dovbnya, V. V. Mytrochenko, and V. Zakutin, “Characteristics of Electron Beam Produced by Magnetron Diode with a Secondary-Emission Cathode”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TPPE052, pp. 3197-3199.
- M. Castellano, L. Catani, A. Cianchi, M. Geitz, G. Orlandi, and V. Verzilov, “Bunch Length Measurements at TTF using Coherent Diffraction Radiation”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper WEP5B05, pp. 1699-1701.
- L. G. Yan, D. R. Deng, and J. Wang, “The Mini-Period Permanent Magnet Staggered Undulator for Compact X-Ray Free Electron Laser”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1797-1800.
- K. Hwang, C. E. Mitchell, and R. D. Ryne, “Analysis of the Chromatic Vertical Focusing Effect of Dipole Fringe Fields”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 760-762.
- D. Leitner, “FIRST RESULTS FOR THE 28 GHZ OPERATION OF THE SUPERCONDUCTING ECR ION SOURCE VENUS”, in Proc. 17th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'04), Tokyo, Japan, Oct. 2004, paper 19A6, pp. XX-XX.
- A. D. Kovalenko et al., “Design of a Fast Cycled Low Loss 6 T Model Dipole Cooling at 1.9 K”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 4221-4223.
- L. K. Nguyen, “Pointing Stabilization Algorithms Explored and Implemented with the Low Energy RHIC Electron Cooling Laser”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 3336-3339.
- F. Meot, “High Brightness Low Frequency SR From a 2/g Deviation ID”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper TUP03B, pp. 2324-2326.
- A. Sessler and J. S. Wurtele, “Constraints on Laser-Driven Accelerators for a High Energy Linear Collider”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper WEP083G, pp. 845-847.
- X. Serra-Gallifa et al., “Fast Orbit Feedback Implementation at Alba Synchrotron”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper THPPC115, pp. 1328-1330.
- N. Nakamura et al., “Specifications and Performance of a Chicane Magnet for the cERL IR-FEL”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 1512-1514.
Back to search