JaCoW Logo

Reference Search

Warning
Some papers titles are all uppercase, you must correct this before using this reference.

The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	I. I. Gadjev, G. Andonian, T. J. Campese, C. C. Hall, and M. Ruelas, “Design of Split Permanent Magnet Quadrupoles for Small Aperture Implementation”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 4247-4249. doi:10.18429/JACoW-IPAC2021-THPAB230
[n]	J. Kirchgessner et al., “Superconducting Cavities for Synchrotron Use”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1141-1144. 
[n]	M. Sawamura, R. Hajima, N. Kikuzawa, E. J. Minehara, R. Nagai, and N. Nishimori, “Performance and Upgrade of the JAERI ERL-FEL”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper FPAB079, pp. 3446-3448. 
[n]	C. Sun, G. J. Portmann, D. Robin, and C. Steier, “Realization of Pseudo Single Bunch Operation with Adjustable Frequency”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2396-2401. doi:10.18429/JACoW-IPAC2015-WEXB3
[n]	Z. Parsa and V. Zadorozhny, “ACCELERATION AND FOCUSING AS OPTIMAL CONTROL FOR DYNAMIC SYSTEMS”, in Proc. RuPAC'04, Dubna, Russia, Oct. 2004, paper THBP27, pp. XX-XX. 
[n]	S. Onuma et al., “The Spill Feedback Control Unit for J-PARC Slow Extraction”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEB038, pp. 2770-2772. 
[n]	C. Steier et al., “Status of the ALS Brightness Upgrade”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper TUPPP037, pp. 1692-1694. 
[n]	B. McDaniel, “The Commissioning and Performance Characteristics of CESR”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 1984-1989. 
[n]	J. Ungrin et al., “Construction of a High-Power RF Resonant Test Load”, in Proc. LINAC'81, Santa Fe, NM, USA, Oct. 1981, paper B12, pp. 68-70. 
[n]	A. V. Smirnov et al., “Characterization of a Sub-THz Radiation Source Based on a 3 MeV Electron Beam and Future Plans”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1892-1894. doi:10.18429/JACoW-IPAC2016-TUPOW054
[n]	D. Rice, “High  Luminosity Operation of the Cornell Electron Storage Ring”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 444-447. 
[n]	C. M. Warsop et al., “Simulation and Measurement of Half Integer Resonance in Coasting Beams in the ISIS Ring”, in Proc. HB'12, Beijing, China, Sep. 2012, paper WEO1C02, pp. 434-438. 
[n]	R. Sundelin, “Superconducting RF for Direct Acceleration in TeV Colliders”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper TU1-04, pp. 221-223. 
[n]	R. Hajima and E. J. Minehara, “Energy-Recovery Option for a Future X-ray Free-Electron Laser”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPPH114, pp. 2736-2738. 
[n]	Y. I. Levinsen, G. Giambelli, A. Latina, R. Tomas, H. Garcia, and J. Snuverink, “Tuning of the Compact Linear Collider Beam Delivery System”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3788-3790. doi:10.18429/JACoW-IPAC2014-THPRI012
[n]	V. Zadorozhny and Z. Parsa, “Acceleration and Self-Focused Particle Beam Drivers”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper RPAG059, pp. 3005-3007. 
[n]	M. Shirakata, H. Fujimori, and Y. Irie, “Beam Tracking Study for the Large Aperture Bump System”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper WEPRI039, pp. 1670-1672. 
[n]	C. M. Celata, F. M. Bieniosek, A. Friedman, D. P. Grote, L. R. Prost, and P. A. Seidl, “The Dynamic Aperture of an Electrostatic Quadrupole Lattice”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper FPAT026, pp. 1946-1948. 
[n]	J. B. Fitzgerald, B. G. Martlew, P. D. Quinn, and S. L. Smith, “An Analysis of the Operational Performance of the Automatic Global Horizontal Beam Position Control System on the SRS at Daresbury”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RAE10, pp. 2414-2416. 
[n]	Y. Han, M.-Y. Huang, Z. Li, A. Li, and J. Peng, “Study of energy jitter and energy spread compression for the CSNS-II linac”, presented at the IPAC'26, Deauville, France, May 2026, paper WEP4611, unpublished. 
[n]	Z. Parsa and V. Zadorozhny, “On Landau Scenario of Chaotization for Beam Distribution”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THA99, pp. 2820-2821. 
[n]	J. B. Fitzgerald, B. G. Martlew, C. Morrell, and S. L. Smith, “The Daresbury Global Horizontal Servo Feedback System: Status and Outlook”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper THP019L, pp. 1848-1850. 
[n]	P. Frigola et al., “Advance Additive Manufacturing Method for SRF Cavities of Various Geometries”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper THPB042, pp. 1181-1184. 
[n]	P. Dickenson, S. A. Griffiths, S. J. Hands, and R. J. Smith, “Upgrade to the SRS 10Hz Booster Power Supply”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP4A02, pp. 2205-2207. 
[n]	A. V. Demyanov, “Application of 235U+ Ion Beams for Increasing the Safety of Operation in Nuclear Reactors for Atomic Power Station (APS)”, in Proc. Cyclotrons'95, Cape Town, South Africa, Oct. 1995, paper D-03, pp. 148-149. 
[n]	M. Ikegami, T. Morishita, T. Ohkawa, and H. Sako, “Beam Dynamics Design of Debuncher System for J-PARC Linac Energy Upgrade”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH6PFP054, pp. 3829-3831. 
[n]	D. J. Adams et al., “Ring Simulation and Beam Dynamics Studies for ISIS Upgrades 0.5 to 10 MW”, in Proc. HB'14, East Lansing, MI, USA, Nov. 2014, paper THO3LR02, pp. 374-378. 
[n]	S. Kwiatkowski, K. M. Baptiste, J. Julian, M. E. Kennedy, and J. Miszczak, “Final Layout and Test Results of the Disconnect Switch for ALS Storage Ring RF System Power Supply”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPO036, pp. 3421-3423. 
[n]	S. A. Kahn, A. Dudas, R. P. Johnson, M. L. Neubauer, R. A. Rimmer, and H. Wang, “Eddy Current Analysis for a 1.495 GHz Injection-Locked Magnetron”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4383-4385. doi:10.18429/JACoW-IPAC2017-THPIK121
[n]	B. Keil and K. Wille, “Control of a Ramped 1.5 GeV Electron Storage Ring by a Multiprocessor DSP Network”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper THPRI087, pp. 2079-2081. 
[n]	M. L. Neubauer, A. Dudas, S. A. Kahn, R. A. Rimmer, and H. Wang, “Magnetron Design for Amplitude Modulation”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4389-4391. doi:10.18429/JACoW-IPAC2017-THPIK123
[n]	C. M. Warsop et al., “High Intensity Loss Mechanisms on the ISIS Rapid Cycling Synchrotron”, in Proc. HB'14, East Lansing, MI, USA, Nov. 2014, paper TUO3LR03, pp. 203-207. 
[n]	A. Kalinin, “Beam-Based Methods of BPM Center Offset and Resolution Measurements”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper THPRI091, pp. 1909-1911. 
[n]	R. Sundelin et al., “CESR RF System”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2844-2847. 
[n]	M. Sawamura, R. Hajima, N. Kikuzawa, E. J. Minehara, R. Nagai, and N. Nishimori, “Cost Estimation of an Energy Recovery Linac Light Source”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper FPAB080, pp. 3449-3451. 
[n]	S. Henderson et al., “Investigation of the Mobius Accelerator at CESR”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEDR8, pp. 410-412. 
[n]	A. Styervoyedov and Y. Shashel, “Microprocessor Based Pulse Synchronization System for Linear Electron Accelerator”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper THPRI105, pp. 1978-1979. 
[n]	M. L. Neubauer et al., “Beam Pipe HOM Absorber for 750 MHz RF Cavities”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPEC060, pp. 3028-3030. 
[n]	A. Styervoyedov, M. Silkin, A. Yatskov, and V. Farenik, “Accelerator Control System Based on Radiation-Acoustic Effects”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper THPRI104, pp. 1975-1977. 
[n]	K. Furuya et al., “Positive-ion Multi-turn Injection with Bi-Waveform Fast Orbit-Bump Magnets”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP083G, pp. 2444-2446. 
[n]	R. Soliday, “Proliferation of SDDS Support for Various Platforms and Languages”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper THAP031, pp. XX-XX. 
[n]	T. Adachi et al., “Development of a Signal Processing Board for Spill Digital Servo System for Proton Synchrotron”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper WPPB14, pp. 430-432. 
[n]	W. J. DeHope, K. L. Griffin, R. Kihara, M. M. Ong, and O. Ross, “An Improved SF6 System for the FXR Induction Linac Blumlein Switches”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEPMS015, pp. 2361-2363. 
[n]	T. Ohkawa, H. Ao, K. Hasegawa, M. Ikegami, H. Sako, and A. Ueno, “Comparison of Trajectory Between Modeling and Experiment for J-PARC Linac”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPAN043, pp. 3324-3326. 
[n]	A. V. Demyanov, S. L. Bogomolov, and V. B. Kutner, “Injector of Multiply Charged Ions for Acclerators and Implanters”, in Proc. Cyclotrons'98, Caen, France, Jun. 1998, paper F-11, pp. 433-434. 
[n]	J. B. Fitzgerald and G. Mrotzek, “Performance and Progress of the Daresbury Photon Beam Tungsten Vane Monitor System”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper THP020L, pp. 1851-1853. 
[n]	C. Montag, L. Ahrens, and P. Thieberger, “Tomographic Measurement of Longitudinal Emittance Growth Due to Stripping Foils”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPAT027, pp. 2000-2002. 
[n]	J. B. Fitzgerald, B. G. Martlew, and P. D. Quinn, “Operational Performance of the Local Vertical Servo System on the Daresbury SRS”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper THP021L, pp. 1854-1856. 
[n]	J. R. Roensch et al., “Longitudinal Phase Space Studies at PITZ”, in Proc. FEL'05, Palo Alto, CA, USA, Aug. 2005, paper THPP040, pp. XX-XX. 
[n]	M. Billing, “Controls in Use at CESR for Adjusting Horizontal to Vertical Coupling”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2246-2249. 
[n]	E. Young, S. Henderson, R. Littauer, B. McDaniel, T. Pelaia, and R. Talman, “Collisions of Resonantly Coupled Round Beams at the Cornell Electron-Positron Storage Ring (CESR)”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 3B003, pp. 1542-1544. 
[n]	S. Igarashi, E. Nakamura, Y. Shimosaki, M. Shirakata, K. Takayama, and T. Toyama, “An Experimental Study of the Intensity Dependent Beam Loss Mechanisms during the Injection Period of the KEK PS 12 GeV Main Ring”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP1A08, pp. 1300-1302. 
[n]	S. Nikiforov, D. V. Efremov, A. Solnyshkov, D. Solnyshkov, and G. Voronin, “Development of an ECR Ion Source for Accelerators and Plasma Processing Applications”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1427-1430. 
[n]	S. Greenwald, Z. Greenwald, D. Hartill, J. Kirchgessner, D. Morse, and D. Rice, “RF Cavity Design for High Current Operation of the Cornell Electron Storage Ring”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 226-229. 
[n]	F. M. Bieniosek, E. Henestroza, J. W. Kwan, L. R. Prost, and P. A. Seidl, “2-MV Injector for HCX”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPAH011, pp. 2099-2101. 
[n]	K. Yonehara, Y. S. Derbenev, R. P. Johnson, and M. L. Neubauer, “A Helical Cooling Channel System for Muon Colliders”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPD076, pp. 870-872. 
[n]	A. Galimberti et al., “Improvements on the Photon Beam Diagnostics at ELETTRA”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper THPRI109, pp. 1891-1893. 
[n]	G. Voronin, V. Kovalchuk, A. Solnyshkov, and M. Svinin, “Development of the Intense Neutron Generator SNEG-13”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2678-2681. 
[n]	F. Asvesta, H. Bartosik, A. Huschauer, Y. Papaphilippou, and G. Sterbini, “Resonance Identification Studies at the CERN PS”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3350-3353. doi:10.18429/JACoW-IPAC2018-THPAK056
[n]	M. L. Neubauer, A. Dudas, and F. Marhauser, “Using Conductive Nanoparticles to Reduce the Surface Charging of Ceramics”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4392-4394. doi:10.18429/JACoW-IPAC2017-THPIK124
[n]	Y. Li et al., “Design and Implementation of CESRTA Superconducting Wiggler Beampipes with Thin Retarding Field Analyzers”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH5RFP029, pp. 3507-3509. 
[n]	T. J. Campese et al., “Multi-Diagnostic Transverse Profile Monitor Chamber for Extreme Ultraviolet Lithography”, in Proc. IBIC'15, Melbourne, Australia, Sep. 2015, pp. 554-556. doi:10.18429/JACoW-IBIC2015-TUPB085
[n]	R. Losito and E. Métral, “CERN accelerates sustainability”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2906-2908. doi:10.18429/JACoW-IPAC2024-WEPS84
[n]	N. Rider et al., “Bunch-By-Bunch Instrumentation Upgrades For CESR, Based On Requirements For The CESR Test Accelerator Research Program”, in Proc. ECLOUD'10, Ithaca, NY, USA, Oct. 2010, paper PST02, pp. 88-90. 
[n]	P. R. Carriere, P. Frigola, D. Gamzina, T. Horn, and A. Y. Murokh, “Additive Manufacturing of Electrical and Thermal Devices: Challenges and Opportunities”, presented at the NAPAC'19, Lansing, MI, USA, Sep. 2019, paper THYBB2, unpublished. 
[n]	S. M. Lynam, R. B. Agustsson, I. I. Gadjev, F. H. O, and A. Yu. Smirnov, “Fabrication Progress of a Superconducting Helical Undulator with Superimposed Focusing Gradient for High Efficiency Tapered X-Ray FELs”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 509-511. doi:10.18429/JACoW-NAPAC2019-TUPLH10
[n]	A. Tikhomirov, M. El-Shazly, G. Gulbekian, and R. Oganessian, “Modeling of the Beam Transmission Efficiency Dependent on the Charge Exchange with the Residual Gas for the CI-100 Cyclotron”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPAH086, pp. 3042-3044. 
[n]	E. J. Minehara, “The JAERI Superconducting RF Linac-based FELs and their Cryogenics”, in Proc. SRF'01, Tsukuba, Japan, Sep. 2001, paper PZ008, pp. XX-XX. 
[n]	K. W. Shepard, Z. A. Conway, J. D. Fuerst, M. P. Kelly, A. M. Porcellato, and G. J. Waldschmidt, “Variable CW RF Power Coupler for 345 MHz Superconducting Cavities”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEPMN087, pp. 2230-2232. 
[n]	J. B. Fitzgerald and M. W. Poole, “A Full-Energy Booster for DIAMOND”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper TUP024G, pp. 539-541. 
[n]	K. Takayama et al., “KEK Digital Accelerator for Material and Biological Sciences”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEC052, pp. 576-578. 
[n]	D. C. Kiselev, D. Schumann, S. Teichmann, and M. Wohlmuther, “Activation of Targets and Accelerator Components at PSI -- A Comparison of Simulation and Measurement”, in Proc. HB'08, Nashville, TN, USA, Aug. 2008, paper WGD09, pp. 363-370. 
[n]	Z. Parsa and V. Zadorozhny, “Dynamic Behavior  of Charged Particle Beams in Curvilinear Magnetic Field”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper WEPLE043, pp. 1279-1280. 
[n]	K. Takayama et al., “Induction Synchrotron (3): Rapid Cycle Synchrotron and Slow Cycle Synchrotron (Hardware Components for the Upgrade of KEK 12 GeV-PS)”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPPH028, pp. 3287-3289. 
[n]	K. Zhou, M.-Y. Huang, X. Lu, and S. Xu, “Simulation of bent crystal collimators in RCS using G4PyORBIT”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper MOPS125, unpublished. 
[n]	M. H. Rashid, C. Mallik And R, and K. Bhandari, “Simulated New Cusp Field Created By Permanent Magnet For An 18 Ghz Ecris”, in Proc. Cyclotrons'07, Giardini-Naxos, Italy, Oct. 2007, pp. 286-288. 
[n]	F. W. Cropp V et al., “Toward Machine Learning-Based Adaptive Control and Global Feedback for Compact Accelerators”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 991-994. doi:10.18429/JACoW-IPAC2022-TUPOST055
[n]	R. P. Wells et al., “Development of a Compact Permanent Magnet Cyclotron for Accelerator Mass Spectrometry”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1727-1730. 
[n]	M.-Y. Huang, “Key issues in the high intensity beam commissioning for the CSNS RCS”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper TUPS057, unpublished. 
[n]	R. Sundelin, J. Kirchgessner, D. Rice, M. Tigner, and E. von Borstel, “3 GHz Superconducting Accelerator Cavity for Use in an Electron Synchrotron”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 98-101. 
[n]	N. S. Sudar et al., “Results from the Nocibur Experiment at Brookhaven National Laboratory's Accelerator Test Facility”, in Proc. FEL'15, Daejeon, Korea, Aug. 2015, pp. 540-542. doi:10.18429/JACoW-FEL2015-TUP074
[n]	T. L. Houck et al., “Design of a High Field Stress, Velvet Cathode for the Flash X-Ray (FXR) Induction Accelerator”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPMS014, pp. 3023-3025. 
[n]	R. Losito, “Report on Superconducting RF Activities at CERN”, in Proc. SRF'01, Tsukuba, Japan, Sep. 2001, paper TL004, pp. XX-XX. 
[n]	K. Zhou, M.-Y. Huang, X. Li, B. Wu, and S. Xu, “Design of an isochronous FFAG from 3 to 150 MeV”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper MOPS124, unpublished. 
[n]	G. Wang et al., “A pulser R&D for the HEPS booster bumper magnet”, presented at the IPAC'23, Venice, Italy, May 2023, paper MOPA066, unpublished. 
[n]	J. P. Farmer, E. Gschwendtner, L. Liang, P. Muggli, and M. S. Weidl, “Electron Witness Constraints for AWAKE”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 1753-1756. doi:10.18429/JACoW-IPAC2021-TUPAB158
[n]	C. Lingwood, G. Burt, K. Gunn, and J. D. A. Smith, “Evolutionary Algorithms in the Design of Crab Cavities”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPEC056, pp. 1850-1852. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search