Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] M. A. Uchida, C. Hunt, and J. Pasternak, “The Design and Implementation of The Radiation Monitors for the Protection of the MICE Tracker Detectors”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1559-1561. doi:10.18429/JACoW-IPAC2014-TUPRI004
[n] H. Reymond, O. Ø. Andreassen, M. Charrondiere, C. Charrondière, and P. D. Jankowski, “Enhancing Measurement Quality in HL-LHC Magnets Testing Using Software Techniques on Digital Multimeter Cards-Based System”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 729-734. doi:10.18429/JACoW-ICALEPCS2023-TUPDP087
[n] D. Bafia et al., “New Insights on Nitrogen Doping”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 347-354. doi:10.18429/JACoW-SRF2019-TUFUA4
[n] A. Voitier, P. Golonka, and M. Gonzalez-Berges, “Automated Coverage Tester for the Oracle Archiver of WinCC OA”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEPMS005, pp. 981-984.
[n] D. Bafia et al., “Investigation of Frequency Behavior Near Tc of Niobium Superconducting Radio-Frequency Cavities”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 112-117. doi:10.18429/JACoW-SRF2019-MOP031
[n] R. Wilson, “Medical Uses of the Harvard University Cyclotron: An Overall View (Invited Paper)”, in Proc. Cyclotrons'72, Vancouver, Canada, Jul. 1972, pp. 578-586.
[n] W. J. Hoffert, G. Donica, H. Herman, and H. J. Varga, “The Radio Frequency System for the Indiana University Isochronous Separated Sector Cyclotron”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1265-1269.
[n] C. R. Scorzato, S. R. Marques, A. R. D. Rodrigues, and P. F. Tavares, “Upgrade of the LNLS Synchrotron Light Source Timing System”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MPPH026, pp. 825-827.
[n] P. Bosland, M. Couach, F. Guemas, M. Juillard, and A. F. Khoder, “NbTiN Sperconducting Thin Films Prepared by Magnetron Sputtering”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1316-1319.
[n] P. Bosland, F. Guemas, M. Juillard, M. Couach, and A. F. Khoder, “NbTiN Superconducting Thin Films Prepared by Magnetron Sputtering”, in Proc. SRF'91, Hamburg, Germany, Aug. 1991, paper SRF91E13, pp. XX-XX.
[n] G. Guignard and E. T. d, “Experimental Insertions made of Two Symmetric Triplets”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper THP12A, pp. 894-896.
[n] P. Gladkikh, I. Karnaukhov, A. Mytsykov, and A. Shcherbakov, “The Injection System for the ISI-800 Storage Ring”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOP086G, pp. 2450-2452.
[n] G. Vignola et al., “CTF3: Design of Driving Beam Combiner Ring”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP6B07, pp. 450-452.
[n] X. Bian, H. Chen, D. Li, and S. Zheng, “Calculating of Coupling Factor of Microwave Electron Gun”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPPE065, pp. 3656-3658.
[n] I. Pogorelsky et al., “Laser Energy Conversion to Solitons and Monoenergetic Protons in Near-critical Hydrogen Plasma”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPD072, pp. 4446-4448.
[n] J. Choi, H.-S. Kang, J. W. Lee, B. R. Park, and J. C. Yoon, “Developing of SMS Mobile System for the PLS Control System”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper WPPA37, pp. 392-394.
[n] F. Dworschak, W. Kogler, G. Lucki, and W. Stellmacher, “An Improved Ion Source for a Compact Cyclotron”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1056-1059.
[n] E. Haebel, V. R?Âdel, F. Gerigk, and Z. T. Zhao, “The Higher-Order Mode Dampers of the 400 MHz Superconducting LHC Cavities”, in Proc. SRF'97, Padova, Italy, Oct. 1997, paper SRF97C33, pp. 701-708.
[n] G. R. Rovigatti de Oliveira, H. Geraissate, and R. Junqueira Leao, “Alignment Strategies and First Results on Sirius Beamlines”, in Proc. MEDSI'20, Chicago, USA, Jul. 2021, pp. 349. doi:10.18429/JACoW-MEDSI2020-THOA03
[n] D. Darvas, E. Blanco Vinuela, and I. Majzik, “A Formal Specification Method for PLC-based Applications”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 907-910. doi:10.18429/JACoW-ICALEPCS2015-WEPGF091
[n] D. Darvas, I. Majzik, and E. Blanco Vinuela, “What is Special About PLC Software Model Checking?”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1781-1786. doi:10.18429/JACoW-ICALEPCS2017-THPHA159
[n] C. Hunt, J.-B. Lagrange, and J. Pasternak, “Layout of the MICE Demonstration of Muon Ionization Cooling”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2881-2884. doi:10.18429/JACoW-IPAC2017-WEPAB131
[n] J. E. Petersson, T. Bögershausen, N. Holmberg, M. Olsson, T. S. Richter, and F. Rojas, “Characterizing Motion Control Systems to Enable Accurate Continuous and Event-Based Scans”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 1431-1434. doi:10.18429/JACoW-ICALEPCS2023-THPDP052
[n] H. J. Choi et al., “PAL-XFEL's Turbo-ICT for Beam Charge Monitoring”, in Proc. IBIC'15, Melbourne, Australia, Sep. 2015, pp. 118-120. doi:10.18429/JACoW-IBIC2015-MOPB036
[n] J.-B. Lagrange et al., “FETS-FFA Ring Study”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 1901-1904. doi:10.18429/JACoW-IPAC2021-TUPAB208
[n] J. R. Piton et al., “Control and Diagnostic Systems for the LNLS 500-MeV Booster Synchrotron”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MPPH025, pp. 822-824.
[n] T. Kramer et al., “Feasibility of kicker systems for FCC-ee and injectors”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 470-473. doi:10.18429/JACoW-IPAC2025-MOPM065
For LaTeX
Use Complete Form
For BibTeX
References
- M. A. Uchida, C. Hunt, and J. Pasternak, “The Design and Implementation of The Radiation Monitors for the Protection of the MICE Tracker Detectors”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1559-1561.
- H. Reymond, O. Ø. Andreassen, M. Charrondiere, C. Charrondière, and P. D. Jankowski, “Enhancing Measurement Quality in HL-LHC Magnets Testing Using Software Techniques on Digital Multimeter Cards-Based System”, in Proc. 19th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'23), Cape Town, South Africa, Oct. 2023, paper TUPDP087, pp. 729-734.
- D. Bafia et al., “New Insights on Nitrogen Doping”, in Proc. 19th Int. Conf. RF Superconductivity (SRF'19), Dresden, Germany, Jun.-Jul. 2019, pp. 347-354.
- A. Voitier, P. Golonka, and M. Gonzalez-Berges, “Automated Coverage Tester for the Oracle Archiver of WinCC OA”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper WEPMS005, pp. 981-984.
- D. Bafia et al., “Investigation of Frequency Behavior Near Tc of Niobium Superconducting Radio-Frequency Cavities”, in Proc. 19th Int. Conf. RF Superconductivity (SRF'19), Dresden, Germany, Jun.-Jul. 2019, pp. 112-117.
- R. Wilson, “Medical Uses of the Harvard University Cyclotron: An Overall View (Invited Paper)”, in Proc. 6th Int. Cyclotron Conf. (Cyclotrons'72), Vancouver, Canada, Jul. 1972, pp. 578-586.
- W. J. Hoffert, G. Donica, H. Herman, and H. J. Varga, “The Radio Frequency System for the Indiana University Isochronous Separated Sector Cyclotron”, in Proc. 6th Particle Accelerator Conf. (PAC'75), Washington D.C., USA, Mar. 1975, pp. 1265-1269.
- C. R. Scorzato, S. R. Marques, A. R. D. Rodrigues, and P. F. Tavares, “Upgrade of the LNLS Synchrotron Light Source Timing System”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper MPPH026, pp. 825-827.
- P. Bosland, M. Couach, F. Guemas, M. Juillard, and A. F. Khoder, “NbTiN Sperconducting Thin Films Prepared by Magnetron Sputtering”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 1316-1319.
- P. Bosland, F. Guemas, M. Juillard, M. Couach, and A. F. Khoder, “NbTiN Superconducting Thin Films Prepared by Magnetron Sputtering”, in Proc. 5th Int. Conf. RF Superconductivity (SRF'91), Hamburg, Germany, Aug. 1991, paper SRF91E13, pp. XX-XX.
- G. Guignard and E. T. d, “Experimental Insertions made of Two Symmetric Triplets”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper THP12A, pp. 894-896.
- P. Gladkikh, I. Karnaukhov, A. Mytsykov, and A. Shcherbakov, “The Injection System for the ISI-800 Storage Ring”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper MOP086G, pp. 2450-2452.
- G. Vignola et al., “CTF3: Design of Driving Beam Combiner Ring”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper THP6B07, pp. 450-452.
- X. Bian, H. Chen, D. Li, and S. Zheng, “Calculating of Coupling Factor of Microwave Electron Gun”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TPPE065, pp. 3656-3658.
- I. Pogorelsky et al., “Laser Energy Conversion to Solitons and Monoenergetic Protons in Near-critical Hydrogen Plasma”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPD072, pp. 4446-4448.
- J. Choi, H.-S. Kang, J. W. Lee, B. R. Park, and J. C. Yoon, “Developing of SMS Mobile System for the PLS Control System”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper WPPA37, pp. 392-394.
- F. Dworschak, W. Kogler, G. Lucki, and W. Stellmacher, “An Improved Ion Source for a Compact Cyclotron”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 1056-1059.
- E. Haebel, V. R?Âdel, F. Gerigk, and Z. T. Zhao, “The Higher-Order Mode Dampers of the 400 MHz Superconducting LHC Cavities”, in Proc. 8th Int. Conf. RF Superconductivity (SRF'97), Padova, Italy, Oct. 1997, paper SRF97C33, pp. 701-708.
- G. R. Rovigatti de Oliveira, H. Geraissate, and R. Junqueira Leao, “Alignment Strategies and First Results on Sirius Beamlines”, in Proc. 11th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'20), Chicago, USA, Jul. 2021, pp. 349.
- D. Darvas, E. Blanco Vinuela, and I. Majzik, “A Formal Specification Method for PLC-based Applications”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 907-910.
- D. Darvas, I. Majzik, and E. Blanco Vinuela, “What is Special About PLC Software Model Checking?”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1781-1786.
- C. Hunt, J.-B. Lagrange, and J. Pasternak, “Layout of the MICE Demonstration of Muon Ionization Cooling”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 2881-2884.
- J. E. Petersson, T. Bögershausen, N. Holmberg, M. Olsson, T. S. Richter, and F. Rojas, “Characterizing Motion Control Systems to Enable Accurate Continuous and Event-Based Scans”, in Proc. 19th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'23), Cape Town, South Africa, Oct. 2023, paper THPDP052, pp. 1431-1434.
- H. J. Choi et al., “PAL-XFEL's Turbo-ICT for Beam Charge Monitoring”, in Proc. 4th Int. Beam Instrumentation Conf. (IBIC'15), Melbourne, Australia, Sep. 2015, pp. 118-120.
- J.-B. Lagrange et al., “FETS-FFA Ring Study”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 1901-1904.
- J. R. Piton et al., “Control and Diagnostic Systems for the LNLS 500-MeV Booster Synchrotron”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper MPPH025, pp. 822-824.
- T. Kramer et al., “Feasibility of kicker systems for FCC-ee and injectors”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper MOPM065, pp. 470-473.
Back to search