Warning
Some papers have malformed authors, please correct this before using these references.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] C. E. Reece, “SRF Challenges for Improving Operational Electron Linacs”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper MOIOA04, pp. 14-19.
[n] A. Gallo et al., “Study of a C-band Harmonic RF System to Optimize the RF Bunch Compression Process of the SPARC Beam”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 1552-1555. doi:10.18429/JACoW-IPAC2015-TUPWA058
[n] S. Holm and D. Reistad, “Status Report on the Uppsala Synchrocyclotron and CELSIUS Cooler Ring Project”, in Proc. Cyclotrons'86, Tokyo, Japan, Oct. 1986, paper B-13, pp. 80-83.
[n] J. H. Ormrod et al., “Invited Paper: The Chalk River Superconducting Cyclotron”, in Proc. Cyclotrons'78, Bloomington, IN, USA, Sep. 1978, paper C-01, pp. 2034-2039.
[n] K. Sennyu, H. Hara, H. Hitomi, K. Kanaoka, and T. Yanagisawa, “Improvement in Cavity Fabrication Technology and Cost Reduction Methods”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper WEIOB03, pp. 603-605.
[n] K. Takata, “Overview of NLC/JLC Collaboration”, in Proc. LINAC'02, Gyeongju, Korea, Aug. 2002, paper TU102, pp. 254-258.
[n] R. Bate, D. M. Dykes, and M. Jensen, “The Diamond Light Source RF System”, in Proc. SRF'03, Lübeck, Germany, Sep. 2003, paper MOP29, pp. 101-102.
[n] S. Kullander, S. Holm, B. Johansson, and A. Tidriks, “Proposal for a Sector-Focusing Synchro-Cyclotron”, in Proc. Cyclotrons'66, Gatlinburg, TN, USA, Aug. 1966, paper D-004, pp. XX-XX.
[n] P. M. McIntyre and A. Sattarov, “Flux-coupled Cyclotron Stack: Optimization for Maximum Beam Power and Minimum Losses”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper THOCN6, pp. 2113-2115.
[n] P. Tripathi, P. Kumar, and S. K. Singh, “Studies of ECR Plasmas and Materials Modification Using Low Energy Ion Beam Facility at IUAC”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 2074-2077. doi:10.18429/JACoW-IPAC2022-WEPOTK016
[n] S. Basak, A. Chakrabarti, and H. K. Pandey, “Simulation Analysis of Analog IQ based LLRF Control of RF Cavity”, in Proc. PCaPAC'12, Kolkata, India, Dec. 2012, paper THPD46, pp. 225-226.
[n] D. Boussard and J. Gareyte, “Study and Compensation of Coherent Longitudinal Instability in the CERN PS”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 1073-1075.
[n] Marc Doleans and Sang-ho Kim (ORNL), “Analytical and Semi-Analytical Expressions for The Voltage in A Cavity Under Dynamic Detuning”, in Proc. LINAC'02, Gyeongju, Korea, Aug. 2002, paper TH430, pp. 668-670.
[n] U. Lehnert et al., “Conceptual Design of a THz Facility at the ELBE Radiation Source”, in Proc. FEL'10, Malmö, Sweden, Aug. 2010, paper THPC05, pp. 656-659.
[n] G. M. Kazakevich, Y. U. Jeong, G. I. Kuznetsov, B. C. Lee, S.-H. Park, and V. M. Pavlov, “Injection System for Microtron-Based Terahertz FEL”, in Proc. FEL'05, Palo Alto, CA, USA, Aug. 2005, paper MOPP049, pp. XX-XX.
[n] A. N. Skrinsky, “Storage Ring Program in Novosibirsk”, in Proc. PAC'73, San Francisco, CA, USA, Mar. 1973, pp. 756-760.
[n] M. Viti et al., “The Bunch Arrival Time Monitor at FLASH and European XFEL”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 701-705. doi:10.18429/JACoW-ICALEPCS2017-TUPHA125
[n] M. F. Purling, “Design & Development of an Innovative 6 Axis Sample Manipulator.”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 415-417. doi:10.18429/JACoW-MEDSI2018-THPH38
[n] J. K. Park, Y.-S. Cho, H.-J. Kwon, K. T. Seol, and S. P. Yun, “Diffusion and Thermal Stability of Implanted Hydrogen in ZnO Nanorods”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1982-1984. doi:10.18429/JACoW-IPAC2016-TUPOY036
[n] S. Paret and O. Boine-Frankenheim, “Space-charge Effects during Multiturn Injection in SIS-18”, in Proc. HB'10, Morschach, Switzerland, Sep.-Oct. 2010, paper MOPD11, pp. 72-76.
[n] V. L. Auslender, “5-10 MeV Industrial High Power Electron Accelerators”, in Proc. LINAC'02, Gyeongju, Korea, Aug. 2002, paper TU204, pp. 284-288.
[n] J. A. Johnstone and D. E. Johnson, “H? Stark Stripping and Component Irradiation in Fermilab Booster”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 3142-3144. doi:10.18429/JACoW-IPAC2021-WEPAB221
For LaTeX
Use Complete Form
For BibTeX
References
- C. E. Reece, “SRF Challenges for Improving Operational Electron Linacs”, in Proc. 15th Int. Conf. RF Superconductivity (SRF'11), Chicago, IL, USA, Jul. 2011, paper MOIOA04, pp. 14-19.
- A. Gallo et al., “Study of a C-band Harmonic RF System to Optimize the RF Bunch Compression Process of the SPARC Beam”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 1552-1555.
- S. Holm and D. Reistad, “Status Report on the Uppsala Synchrocyclotron and CELSIUS Cooler Ring Project”, in Proc. 11th Int. Cyclotron Conf. and Their Applications (Cyclotrons'86), Tokyo, Japan, Oct. 1986, paper B-13, pp. 80-83.
- J. H. Ormrod et al., “Invited Paper: The Chalk River Superconducting Cyclotron”, in Proc. 8th Int. Cyclotron Conf. and Their Applications (Cyclotrons'78), Bloomington, IN, USA, Sep. 1978, paper C-01, pp. 2034-2039.
- K. Sennyu, H. Hara, H. Hitomi, K. Kanaoka, and T. Yanagisawa, “Improvement in Cavity Fabrication Technology and Cost Reduction Methods”, in Proc. 15th Int. Conf. RF Superconductivity (SRF'11), Chicago, IL, USA, Jul. 2011, paper WEIOB03, pp. 603-605.
- K. Takata, “Overview of NLC/JLC Collaboration”, in Proc. 21st Linear Accelerator Conf. (LINAC'02), Gyeongju, Korea, Aug. 2002, paper TU102, pp. 254-258.
- R. Bate, D. M. Dykes, and M. Jensen, “The Diamond Light Source RF System”, in Proc. 11th Workshop RF Superconductivity (SRF'03), Lübeck, Germany, Sep. 2003, paper MOP29, pp. 101-102.
- S. Kullander, S. Holm, B. Johansson, and A. Tidriks, “Proposal for a Sector-Focusing Synchro-Cyclotron”, in Proc. Int. Conf. on Isochronous Cyclotrons (Cyclotrons'66), Gatlinburg, TN, USA, Aug. 1966, paper D-004, pp. XX-XX.
- P. M. McIntyre and A. Sattarov, “Flux-coupled Cyclotron Stack: Optimization for Maximum Beam Power and Minimum Losses”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper THOCN6, pp. 2113-2115.
- P. Tripathi, P. Kumar, and S. K. Singh, “Studies of ECR Plasmas and Materials Modification Using Low Energy Ion Beam Facility at IUAC”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 2074-2077.
- S. Basak, A. Chakrabarti, and H. K. Pandey, “Simulation Analysis of Analog IQ based LLRF Control of RF Cavity”, in Proc. 9th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'12), Kolkata, India, Dec. 2012, paper THPD46, pp. 225-226.
- D. Boussard and J. Gareyte, “Study and Compensation of Coherent Longitudinal Instability in the CERN PS”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 1073-1075.
- Marc Doleans and Sang-ho Kim (ORNL), “Analytical and Semi-Analytical Expressions for The Voltage in A Cavity Under Dynamic Detuning”, in Proc. 21st Linear Accelerator Conf. (LINAC'02), Gyeongju, Korea, Aug. 2002, paper TH430, pp. 668-670.
- U. Lehnert et al., “Conceptual Design of a THz Facility at the ELBE Radiation Source”, in Proc. 32nd Int. Free Electron Laser Conf. (FEL'10), Malmö, Sweden, Aug. 2010, paper THPC05, pp. 656-659.
- G. M. Kazakevich, Y. U. Jeong, G. I. Kuznetsov, B. C. Lee, S.-H. Park, and V. M. Pavlov, “Injection System for Microtron-Based Terahertz FEL”, in Proc. 27th Int. Free Electron Laser Conf. (FEL'05), Palo Alto, CA, USA, Aug. 2005, paper MOPP049, pp. XX-XX.
- A. N. Skrinsky, “Storage Ring Program in Novosibirsk”, in Proc. 5th Particle Accelerator Conf. (PAC'73), San Francisco, CA, USA, Mar. 1973, pp. 756-760.
- M. Viti et al., “The Bunch Arrival Time Monitor at FLASH and European XFEL”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 701-705.
- M. F. Purling, “Design & Development of an Innovative 6 Axis Sample Manipulator.”, in Proc. 10th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'18), Paris, France, Jun. 2018, pp. 415-417.
- J. K. Park, Y.-S. Cho, H.-J. Kwon, K. T. Seol, and S. P. Yun, “Diffusion and Thermal Stability of Implanted Hydrogen in ZnO Nanorods”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1982-1984.
- S. Paret and O. Boine-Frankenheim, “Space-charge Effects during Multiturn Injection in SIS-18”, in Proc. 46th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'10), Morschach, Switzerland, Sep.-Oct. 2010, paper MOPD11, pp. 72-76.
- V. L. Auslender, “5-10 MeV Industrial High Power Electron Accelerators”, in Proc. 21st Linear Accelerator Conf. (LINAC'02), Gyeongju, Korea, Aug. 2002, paper TU204, pp. 284-288.
- J. A. Johnstone and D. E. Johnson, “H? Stark Stripping and Component Irradiation in Fermilab Booster”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 3142-3144.
Back to search