Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] C.-C. Tsai, Y.-Y. Hsu, J.-C. Jan, and F.-Y. Lin, “Quality and performance measurement of glued Samarium-Cobalt magnet blocks”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper THPB062, unpublished.
[n] S. Poddar et al., “Half-Metal Spin Filter for Highly Polarized Emission from GaAs Photocathodes”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2833-2836. doi:10.18429/JACoW-IPAC2021-WEPAB102
[n] M. Lesourd, E. Plouviez, L. Farvacque, and J. M. Filhol, “DAMPING LINK FOR MAGNET GIRDER ASSEMBLY AND E-BEAM STABILITY IMPROVEMENT AT THE ESRF”, in Proc. APAC'01, Beijing, China, Sep. 2001, paper WECM01, pp. XX-XX.
[n] M. J. Ferreira, R. O. Ferraz, H. G. Filho, and M. B. Silva, “Design of 2 T Wiggler Vacuum Chamber for the LNLS Storage Ring”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper MOPKF003, pp. 300-302.
[n] A. R. Brill et al., “Current Monitor and Beam Position Monitor Performance for High Charge Operation of the Advanced Photon Source Particle Accumulator Ring”, in Proc. IBIC'19, Malmö, Sweden, Sep. 2019, pp. 552-554. doi:10.18429/JACoW-IBIC2019-WEPP017
[n] S. L. Bogomolov et al., “Research on Metallic Ion Beam Production With Electron Cyclotron Resonance Ion Sources”, in Proc. Cyclotrons'19, Cape Town, South Africa, Sep. 2019, pp. 62-65. doi:10.18429/JACoW-CYCLOTRONS2019-MOP017
[n] L. Gong, W. Dou, and Z. Wang, “A 100 mA RFQ Beam Dynamics Design with Small Output Beam Emittance”, presented at the IPAC'23, Venice, Italy, May 2023, paper WEPA032, unpublished.
[n] K. Popov et al., “Study of laser-beam arrival time synchronization towards sub-picosecond stability level”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 2800-2803. doi:10.18429/JACoW-IPAC2025-THPM050
[n] P. Wang et al., “Experimental Study on PM-AM Method in Pulse Compression System”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4230-4232. doi:10.18429/JACoW-IPAC2017-THPIK059
[n] E. Milton, M. Austin, and D. McArthur, “Time served”, in Proc. ICALEPCS'25, Chicago, IL, USA, Sep. 2025, pp. 470-476. doi:10.18429/JACoW-ICALEPCS2025-TUMR014
[n] Z. C. Liu et al., “Optical Design of the Energy Recovery Linac FEL at Peking University”, in Proc. FEL'06, Berlin, Germany, Aug.-Sep. 2006, paper TUAAU05, pp. 277-280.
[n] V. Vlachodimitropoulos, M. J. Barnes, and A. Chmielinska, “Preliminary Results from Validation Measurements of the Longitudinal Power Deposition Model for the LHC Injection Kicker Magnet”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2636-2639. doi:10.18429/JACoW-IPAC2018-WEPMK005
[n] K. Johnson and A. M. Koehler, “Clinical Experience with the 160 MeV Proton Beam and Some Implications for Designers”, in Proc. Cyclotrons'78, Bloomington, IN, USA, Sep. 1978, paper E-08, pp. 2253-2256.
[n] D. Winters et al., “Laser cooling taken to the extreme: cold relativistic intense beams of highly-charged heavy ions”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1314-1318. doi:10.18429/JACoW-IPAC2023-TUOGA2
[n] J. Tan, C. Wang, C. Xiao, W. Fang, and X. Huang, “R&D of X-band deflecting structure applied on SHINE”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 167-169. doi:10.18429/JACoW-IPAC2024-MOPC49
[n] C. Wang, “Magnet designs for the multi-bend achromat lattice of the Shenzhen Innovation Light Facility”, presented at the IPAC'23, Venice, Italy, May 2023, paper MOPM057, unpublished.
[n] L. M. Wroe, R. Apsimon, M. Dosanjh, and S. L. Sheehy, “Minimising Transverse Multipoles in Accelerating RF Cavities via Azimuthally Modulated Designs”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 610-613. doi:10.18429/JACoW-IPAC2022-MOPOTK065
[n] P. Gagliardi et al., “Large Scale Production at Ansaldo of 352 MHz Niobium Coated LEP-CERN Cavities: Development Activities and First Results”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1063-1066.
[n] F. Zhu et al., “A 1.3 GHz Cryomodule with 2x9-Cell Cavity for SETF at Peking University”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper FRAA05, pp. 1443-1445.
[n] G. Skripka, P. Dijkstal, G. Iadarola, L. Mether, G. Rumolo, and E. G. T. Wulff, “Comparison of Electron Cloud Build-Up Simulations Against Heat Load Measurements for the LHC Arcs With Different Beam Configurations”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3232-3235. doi:10.18429/JACoW-IPAC2019-WEPTS051
[n] Y. Jiang, M. Gai, J. Hirshfield, M. Palmer, and S. Shchelkunov, “Novel deuteron accelerator for nuclear waste transmutation”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 1564-1566. doi:10.18429/JACoW-IPAC2025-TUPS059
[n] J.-J. Guo, D. Gu, M. Zhang, H. Deng, and Q. Gu, “Terahertz radiation and Joule heating of corrugated structure at SHINE facility”, presented at the IPAC'23, Venice, Italy, May 2023, paper TUPL147, unpublished.
[n] M. J. Ferreira, R. O. Ferraz, F. A. Minuzzi, and M. B. Silva, “LNLS Vacuum System Commissioning”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 4P018, pp. 3628-3629.
[n] C. Adolphsen, “Advances in Normal Conducting Accelerator Technology from the X-Band Linear Collider Program”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TOPE002, pp. 204-208.
[n] R. Nagaoka, P. Elleaume, L. Farvacque, and J. M. Filhol, “Correction of Linear Coupling on the basis of Response Matrix Modelling and X-Ray Pinhole Measurement”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THP71, pp. 3119-3121.
[n] J. Kewisch, A. Fedotov, D. Kayran, J. Unger, S. Seletskiy, and Y. Jing, “Optics Design for a Storage Ring Based Electron Cooler for Cooling at High Energies”, in Proc. COOL'25, Stony Brook, NY, USA, Oct. 2025, pp. 93-97. doi:10.18429/JACoW-COOL2025-THB2
[n] J. H. Xu, Z. H. Bai, Z. L. Ren, J. J. Tan, P. H. Yang, and Q. Zhang, “Study of Seven-Bend-Achromat Lattice Option for Half”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 3926-3928. doi:10.18429/JACoW-IPAC2021-THPAB073
[n] M. Camarda et al., “Towards Full Silicon 4H-SiC Based X-Ray Beam Monitoring”, in Proc. IBIC'19, Malmö, Sweden, Sep. 2019, pp. 665-668. doi:10.18429/JACoW-IBIC2019-THAO02
[n] Z. L. Ren, Z. H. Bai, J. J. Tan, L. Wang, H. Xu, and P. H. Yang, “Complex Unit Lattice Cell for Low-Emittance Synchrotrons”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 3254-3256. doi:10.18429/JACoW-IPAC2021-WEPAB263
[n] J. Unger, A. Fedotov, G. Hoffstaetter, J. Kewisch, and S. Seletskiy, “Space charge dynamics in ring-based Electron Cooler”, presented at the IPAC'26, Deauville, France, May 2026, paper THP5328, unpublished.
[n] S. H. Nam, J. Y. Huang, Y. J. Han, and M. Yoon, “Status of The PLS 2-2.5 GeV Electron Linac”, in Proc. LINAC'02, Gyeongju, Korea, Aug. 2002, paper TH407, pp. 617-619.
For LaTeX
Use Complete Form
For BibTeX
References
- C.-C. Tsai, Y.-Y. Hsu, J.-C. Jan, and F.-Y. Lin, “Quality and performance measurement of glued Samarium-Cobalt magnet blocks”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper THPB062, unpublished.
- S. Poddar et al., “Half-Metal Spin Filter for Highly Polarized Emission from GaAs Photocathodes”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 2833-2836.
- M. Lesourd, E. Plouviez, L. Farvacque, and J. M. Filhol, “DAMPING LINK FOR MAGNET GIRDER ASSEMBLY AND E-BEAM STABILITY IMPROVEMENT AT THE ESRF”, in Proc. 2nd Asian Particle Accelerator Conf. (APAC'01), Beijing, China, Sep. 2001, paper WECM01, pp. XX-XX.
- M. J. Ferreira, R. O. Ferraz, H. G. Filho, and M. B. Silva, “Design of 2 T Wiggler Vacuum Chamber for the LNLS Storage Ring”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper MOPKF003, pp. 300-302.
- A. R. Brill et al., “Current Monitor and Beam Position Monitor Performance for High Charge Operation of the Advanced Photon Source Particle Accumulator Ring”, in Proc. 8th Int. Beam Instrumentation Conf. (IBIC'19), Malmö, Sweden, Sep. 2019, pp. 552-554.
- S. L. Bogomolov et al., “Research on Metallic Ion Beam Production With Electron Cyclotron Resonance Ion Sources”, in Proc. 22nd Int. Conf. on Cyclotrons and their Applications (Cyclotrons'19), Cape Town, South Africa, Sep. 2019, pp. 62-65.
- L. Gong, W. Dou, and Z. Wang, “A 100 mA RFQ Beam Dynamics Design with Small Output Beam Emittance”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPA032, unpublished.
- K. Popov et al., “Study of laser-beam arrival time synchronization towards sub-picosecond stability level”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper THPM050, pp. 2800-2803.
- P. Wang et al., “Experimental Study on PM-AM Method in Pulse Compression System”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4230-4232.
- E. Milton, M. Austin, and D. McArthur, “Time served”, in Proc. 20th International Conference on Accelerator and Large Experimental Control Systems (ICALEPCS'25), Chicago, IL, USA, Sep. 2025, pp. 470-476.
- Z. C. Liu et al., “Optical Design of the Energy Recovery Linac FEL at Peking University”, in Proc. 28th Int. Free Electron Laser Conf. (FEL'06), Berlin, Germany, Aug.-Sep. 2006, paper TUAAU05, pp. 277-280.
- V. Vlachodimitropoulos, M. J. Barnes, and A. Chmielinska, “Preliminary Results from Validation Measurements of the Longitudinal Power Deposition Model for the LHC Injection Kicker Magnet”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2636-2639.
- K. Johnson and A. M. Koehler, “Clinical Experience with the 160 MeV Proton Beam and Some Implications for Designers”, in Proc. 8th Int. Cyclotron Conf. and Their Applications (Cyclotrons'78), Bloomington, IN, USA, Sep. 1978, paper E-08, pp. 2253-2256.
- D. Winters et al., “Laser cooling taken to the extreme: cold relativistic intense beams of highly-charged heavy ions”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUOGA2, pp. 1314-1318.
- J. Tan, C. Wang, C. Xiao, W. Fang, and X. Huang, “R&D of X-band deflecting structure applied on SHINE”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper MOPC49, pp. 167-169.
- C. Wang, “Magnet designs for the multi-bend achromat lattice of the Shenzhen Innovation Light Facility”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPM057, unpublished.
- L. M. Wroe, R. Apsimon, M. Dosanjh, and S. L. Sheehy, “Minimising Transverse Multipoles in Accelerating RF Cavities via Azimuthally Modulated Designs”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 610-613.
- P. Gagliardi et al., “Large Scale Production at Ansaldo of 352 MHz Niobium Coated LEP-CERN Cavities: Development Activities and First Results”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 1063-1066.
- F. Zhu et al., “A 1.3 GHz Cryomodule with 2x9-Cell Cavity for SETF at Peking University”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper FRAA05, pp. 1443-1445.
- G. Skripka, P. Dijkstal, G. Iadarola, L. Mether, G. Rumolo, and E. G. T. Wulff, “Comparison of Electron Cloud Build-Up Simulations Against Heat Load Measurements for the LHC Arcs With Different Beam Configurations”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 3232-3235.
- Y. Jiang, M. Gai, J. Hirshfield, M. Palmer, and S. Shchelkunov, “Novel deuteron accelerator for nuclear waste transmutation”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper TUPS059, pp. 1564-1566.
- J.-J. Guo, D. Gu, M. Zhang, H. Deng, and Q. Gu, “Terahertz radiation and Joule heating of corrugated structure at SHINE facility”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPL147, unpublished.
- M. J. Ferreira, R. O. Ferraz, F. A. Minuzzi, and M. B. Silva, “LNLS Vacuum System Commissioning”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 4P018, pp. 3628-3629.
- C. Adolphsen, “Advances in Normal Conducting Accelerator Technology from the X-Band Linear Collider Program”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TOPE002, pp. 204-208.
- R. Nagaoka, P. Elleaume, L. Farvacque, and J. M. Filhol, “Correction of Linear Coupling on the basis of Response Matrix Modelling and X-Ray Pinhole Measurement”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper THP71, pp. 3119-3121.
- J. Kewisch, A. Fedotov, D. Kayran, J. Unger, S. Seletskiy, and Y. Jing, “Optics Design for a Storage Ring Based Electron Cooler for Cooling at High Energies”, in Proc. 15th International Workshop on Beam Cooling and Related Topics (COOL'25), Stony Brook, NY, USA, Oct. 2025, paper THB2, pp. 93-97.
- J. H. Xu, Z. H. Bai, Z. L. Ren, J. J. Tan, P. H. Yang, and Q. Zhang, “Study of Seven-Bend-Achromat Lattice Option for Half”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 3926-3928.
- M. Camarda et al., “Towards Full Silicon 4H-SiC Based X-Ray Beam Monitoring”, in Proc. 8th Int. Beam Instrumentation Conf. (IBIC'19), Malmö, Sweden, Sep. 2019, pp. 665-668.
- Z. L. Ren, Z. H. Bai, J. J. Tan, L. Wang, H. Xu, and P. H. Yang, “Complex Unit Lattice Cell for Low-Emittance Synchrotrons”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 3254-3256.
- J. Unger, A. Fedotov, G. Hoffstaetter, J. Kewisch, and S. Seletskiy, “Space charge dynamics in ring-based Electron Cooler”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper THP5328, this conference.
- S. H. Nam, J. Y. Huang, Y. J. Han, and M. Yoon, “Status of The PLS 2-2.5 GeV Electron Linac”, in Proc. 21st Linear Accelerator Conf. (LINAC'02), Gyeongju, Korea, Aug. 2002, paper TH407, pp. 617-619.
Back to search