Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] S. Guiducci, “Beam Lifetime Studies in DAFNE”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper WEPLE028, pp. 1133-1135.
[n] P. Zou, W. Gai, X. Sun, and L. Xiao, “A Hybrid Dielectric and Iris Loaded Periodic Accelerating Structure”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper FPAH125, pp. 3966-3968.
[n] B. N. Sukhina, N. I. Alinovsky, I. L. Chertok, S. N. Chumakov, N. S. Dikansky, and A. D. Goncharov, “A Series of Ion Accelerators for Industry”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TAC06, pp. 143-145.
[n] W. F. Bergan, I. V. Bazarov, C. J. R. Duncan, and D. L. Rubin, “Applications of Dimension-Reduction to Various Accelerator Physics Problems”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 4060-4062. doi:10.18429/JACoW-IPAC2019-THPRB099
[n] D. Alesini and F. Marcellini, “Beam Loading in the RF Deflector of the CTF3 Delay Loop”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPLT097, pp. 2077-2079.
[n] M. X. Li et al., “Superconducting 16-Pole Wiggler for Beijing Electron-Positron Collider II”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 2853-2855. doi:10.18429/JACoW-IPAC2018-WEPML071
[n] S. Fleury, F. Valchkova-Georgieva, J.-P. Burnet, M. Bernardini, and M. Benedikt, “FCC-ee large-scale project installation planning: challenges & proposals”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1934-1936. doi:10.18429/JACoW-IPAC2024-WECD1
[n] A. Gallo, D. Alesini, M. Bellaveglia, R. Boni, G. Di Pirro, and F. Tazzioli, “The SPARC RF Synchronization System”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper WPAT006, pp. 1024-1026.
[n] Ya. S. Derbenev et al., “The Status of Electron Cooling at Novosibirsk (Theory and Experiment)”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2672-2677.
[n] M. Polyanskiy, M. Babzien, D. Choge, W. Li, M. Palmer, and I. Pogorelsky, “Status and perspectives of multi-terawatt long-wave infrared lasers for particle acceleration research”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper MOPS127, unpublished.
[n] A. Cianchi et al., “Design Study of a Movable Emittance Meter Device for the SPARC Photoinjector”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper THPLT059, pp. 2622-2624.
[n] A. Ts. Amatuni, “Approximate Analytical Description of the Underdense Plasma Lens”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 7V023, pp. 690-692.
[n] P. H. Yang, Z. H. Bai, J. J. Tan, L. Wang, and J. H. Xu, “Comparison of Optimization Methods for Hybrid Seven-Bend-Achromat Lattice Design”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1532-1534. doi:10.18429/JACoW-IPAC2019-TUPGW055
[n] F. Soubelet, O. Apsimon, T. H. B. Persson, R. Tom?ís Garc?¡a, and C. P. Welsch, “Prospect for Interaction Region Local Coupling Correction in the LHC Run 3”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 61-64. doi:10.18429/JACoW-IPAC2021-MOPAB007
[n] M. Kilpatrick et al., “3D visualization and analysis of neutron scattering data in the control room”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3465-3468. doi:10.18429/JACoW-IPAC2024-THPG84
[n] S. Lueders, “Summary of the Control System Cyber-Security (CS)2/HEP Workshop”, in Proc. ICALEPCS'07, Oak Ridge, TN, USA, Oct. 2007, paper MOPA01, pp. 18-22.
[n] Y. Ma et al., “Microphonics Suppression in ARIEL ACM1 Cryomodule”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 65-68. doi:10.18429/JACoW-IPAC2019-MOPGW004
[n] S. De Santis, M. C. Ross, and A. Wolski, “Design of a Fast Extraction Kicker for the Accelerator Test Facility”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPLS113, pp. 3544-3546.
[n] J. Ohnishi, Y. Higurashi, O. Kamigaito, and T. Nakagawa, “Extraction System and Beam Qualities of the RIKEN Full Superconducting ECR Ion source”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPEC061, pp. 4194-4196.
[n] A. V. Tsakanian, M. Dohlus, and I. Zagorodnov, “Numerical Calculation of Wake Fields in Structures with Conductive Walls”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH5PFP059, pp. 3342-3344.
[n] T. A. Treado and S. J. Einarson, “Power Couplers for the ILC”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THIBKI02, pp. 2685-2687.
[n] M. E. Gruchalla et al., “LANSCE-R Wire-scanner System”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOP233, pp. 545-547.
[n] T. Nakagawa et al., “Development of RIKEN 28 Ghz SC-ECRISs for Synthesizing Super-Heavy Elements”, in Proc. HIAT'18, Lanzhou, China, Oct. 2018, pp. 77-81. doi:10.18429/JACoW-HIAT2018-TUZAA01
[n] J. Liu, H. L. Shi, C. H. Wang, J. C. Wang, and X. L. Wang, “The Control System for BEPCII Superconducting Magnet”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper THP006, pp. XX-XX.
[n] T. Tamba, J. Miyamatsu, K. Sakaue, and M. Washio, “Study on Improving Durability of Cs-Te Photocathode for an RF-gun”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2182-2184. doi:10.18429/JACoW-IPAC2019-TUPTS111
[n] S. M. Lynam, R. B. Agustsson, I. I. Gadjev, F. H. O, and A. Yu. Smirnov, “Fabrication Progress of a Superconducting Helical Undulator with Superimposed Focusing Gradient for High Efficiency Tapered X-Ray FELs”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 509-511. doi:10.18429/JACoW-NAPAC2019-TUPLH10
[n] N. Hu, M. B. Belhaj, M. Chabot, J.-L. Coacolo, D. Longuevergne, and G. Olry, “Multipactor Simulations for MYRRHA Spoke Cavity: Comparison Between SPARK3D, MUSICC3D, CST PIC and Measurement”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 3606-3609. doi:10.18429/JACoW-IPAC2021-WEPAB381
[n] R. G. Eichhorn et al., “Cornell's ERL Cavity Production”, in Proc. SRF'13, Paris, France, Sep. 2013, paper THP007, pp. 909-913.
[n] R. M. Zwaska, S. E. Kopp, W. Pellico, and R. C. Webber, “Synchronization of the Fermilab Booster and Main Injector for Multiple Batch Injection”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper THPLT130, pp. 2771-2773.
[n] G. A. Blair et al., “A Study of Emittance Measurement at the ILC”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPCH048, pp. 1115-1117.
[n] R. Wright, S. Brown, H. Gibson, J. D. Gilpatrick, D. P. Sandoval, and M. E. Zander, “Image Processing and Computer Controls for Video Profile Diagnostic System in the Ground Test Accelerator (GTA)”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper TH4-25, pp. 674-676.
[n] Y. Takeuchi, Y. Iwashita, and H. Tongu, “Compact H+ ECR Ion Source with Pulse Gas Valve”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 955-957. doi:10.18429/JACoW-LINAC2018-THPO126
[n] S. Bartolome-Jimenez and G. Trinquart, “Installation of the LHC Experimental Insertions”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPLT007, pp. 1828-1830.
[n] M. Kilpatrick et al., “Interactive automated Bragg peak identification with 3D neutron scattering data”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 5138-5141. doi:10.18429/JACoW-IPAC2023-THPM117
[n] B. Bolzon et al., “Results of the High Resolution OTR Measurements at KEK and Comparison with Simulations”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper MOPF04, pp. 204-207.
[n] K. Kruchinin, A. Lyapin, and M. McCallum, “Design, characterization, and validation of a pulsed RF burst source for In-situ beam position monitor calibration”, presented at the IBIC'25, Liverpool, UK, Sep. 2025, paper WEDC01, unpublished.
[n] T. J. Fessenden, “Induction Linacs for Heavy Ion Fusion Research”, in Proc. LINAC'84, Seeheim, Germany, May 1984, paper FRE0003, pp. 485-489.
[n] M. H. Woodle, “ISABELLE Superconducting Power Distribution System”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2928-2931.
[n] S. C. Huang, H. Guo, Y. He, M. Xu, Z. Q. Yang, and S. X. Zhang, “The Status of Nb/Cu Superconducting Cavity Activities at IMP”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, paper MOPCAV007, pp..
[n] W. Li et al., “Optical pump generation for long-wave infrared lasers for advanced acceleration”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 668-671. doi:10.18429/JACoW-IPAC2024-MOPR90
[n] C. Madec, “Challenges in Superconducting Accelerating Module Design and Construction for High Power Proton Accelerators”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 280-285. doi:10.18429/JACoW-LINAC2018-TU1A01
[n] P. V. Logatchev et al., “Measurement of Time Response of Laser-Triggered GaAs Photocathode”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1480-1483.
For LaTeX
Use Complete Form
For BibTeX
References
- S. Guiducci, “Beam Lifetime Studies in DAFNE”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper WEPLE028, pp. 1133-1135.
- P. Zou, W. Gai, X. Sun, and L. Xiao, “A Hybrid Dielectric and Iris Loaded Periodic Accelerating Structure”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper FPAH125, pp. 3966-3968.
- B. N. Sukhina, N. I. Alinovsky, I. L. Chertok, S. N. Chumakov, N. S. Dikansky, and A. D. Goncharov, “A Series of Ion Accelerators for Industry”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper TAC06, pp. 143-145.
- W. F. Bergan, I. V. Bazarov, C. J. R. Duncan, and D. L. Rubin, “Applications of Dimension-Reduction to Various Accelerator Physics Problems”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 4060-4062.
- D. Alesini and F. Marcellini, “Beam Loading in the RF Deflector of the CTF3 Delay Loop”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper WEPLT097, pp. 2077-2079.
- M. X. Li et al., “Superconducting 16-Pole Wiggler for Beijing Electron-Positron Collider II”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 2853-2855.
- S. Fleury, F. Valchkova-Georgieva, J.-P. Burnet, M. Bernardini, and M. Benedikt, “FCC-ee large-scale project installation planning: challenges & proposals”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper WECD1, pp. 1934-1936.
- A. Gallo, D. Alesini, M. Bellaveglia, R. Boni, G. Di Pirro, and F. Tazzioli, “The SPARC RF Synchronization System”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper WPAT006, pp. 1024-1026.
- Ya. S. Derbenev et al., “The Status of Electron Cooling at Novosibirsk (Theory and Experiment)”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2672-2677.
- M. Polyanskiy, M. Babzien, D. Choge, W. Li, M. Palmer, and I. Pogorelsky, “Status and perspectives of multi-terawatt long-wave infrared lasers for particle acceleration research”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper MOPS127, unpublished.
- A. Cianchi et al., “Design Study of a Movable Emittance Meter Device for the SPARC Photoinjector”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper THPLT059, pp. 2622-2624.
- A. Ts. Amatuni, “Approximate Analytical Description of the Underdense Plasma Lens”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 7V023, pp. 690-692.
- P. H. Yang, Z. H. Bai, J. J. Tan, L. Wang, and J. H. Xu, “Comparison of Optimization Methods for Hybrid Seven-Bend-Achromat Lattice Design”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1532-1534.
- F. Soubelet, O. Apsimon, T. H. B. Persson, R. Tom?ís Garc?¡a, and C. P. Welsch, “Prospect for Interaction Region Local Coupling Correction in the LHC Run 3”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 61-64.
- M. Kilpatrick et al., “3D visualization and analysis of neutron scattering data in the control room”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPG84, pp. 3465-3468.
- S. Lueders, “Summary of the Control System Cyber-Security (CS)2/HEP Workshop”, in Proc. 11th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'07), Oak Ridge, TN, USA, Oct. 2007, paper MOPA01, pp. 18-22.
- Y. Ma et al., “Microphonics Suppression in ARIEL ACM1 Cryomodule”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 65-68.
- S. De Santis, M. C. Ross, and A. Wolski, “Design of a Fast Extraction Kicker for the Accelerator Test Facility”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THPLS113, pp. 3544-3546.
- J. Ohnishi, Y. Higurashi, O. Kamigaito, and T. Nakagawa, “Extraction System and Beam Qualities of the RIKEN Full Superconducting ECR Ion source”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPEC061, pp. 4194-4196.
- A. V. Tsakanian, M. Dohlus, and I. Zagorodnov, “Numerical Calculation of Wake Fields in Structures with Conductive Walls”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH5PFP059, pp. 3342-3344.
- T. A. Treado and S. J. Einarson, “Power Couplers for the ILC”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THIBKI02, pp. 2685-2687.
- M. E. Gruchalla et al., “LANSCE-R Wire-scanner System”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper MOP233, pp. 545-547.
- T. Nakagawa et al., “Development of RIKEN 28 Ghz SC-ECRISs for Synthesizing Super-Heavy Elements”, in Proc. 14th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'18), Lanzhou, China, Oct. 2018, pp. 77-81.
- J. Liu, H. L. Shi, C. H. Wang, J. C. Wang, and X. L. Wang, “The Control System for BEPCII Superconducting Magnet”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper THP006, pp. XX-XX.
- T. Tamba, J. Miyamatsu, K. Sakaue, and M. Washio, “Study on Improving Durability of Cs-Te Photocathode for an RF-gun”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2182-2184.
- S. M. Lynam, R. B. Agustsson, I. I. Gadjev, F. H. O, and A. Yu. Smirnov, “Fabrication Progress of a Superconducting Helical Undulator with Superimposed Focusing Gradient for High Efficiency Tapered X-Ray FELs”, in Proc. North American Particle Accelerator Conf. (NAPAC'19), Lansing, MI, USA, Sep. 2019, pp. 509-511.
- N. Hu, M. B. Belhaj, M. Chabot, J.-L. Coacolo, D. Longuevergne, and G. Olry, “Multipactor Simulations for MYRRHA Spoke Cavity: Comparison Between SPARK3D, MUSICC3D, CST PIC and Measurement”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 3606-3609.
- R. G. Eichhorn et al., “Cornell's ERL Cavity Production”, in Proc. 16th Int. Conf. RF Superconductivity (SRF'13), Paris, France, Sep. 2013, paper THP007, pp. 909-913.
- R. M. Zwaska, S. E. Kopp, W. Pellico, and R. C. Webber, “Synchronization of the Fermilab Booster and Main Injector for Multiple Batch Injection”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper THPLT130, pp. 2771-2773.
- G. A. Blair et al., “A Study of Emittance Measurement at the ILC”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPCH048, pp. 1115-1117.
- R. Wright, S. Brown, H. Gibson, J. D. Gilpatrick, D. P. Sandoval, and M. E. Zander, “Image Processing and Computer Controls for Video Profile Diagnostic System in the Ground Test Accelerator (GTA)”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper TH4-25, pp. 674-676.
- Y. Takeuchi, Y. Iwashita, and H. Tongu, “Compact H+ ECR Ion Source with Pulse Gas Valve”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 955-957.
- S. Bartolome-Jimenez and G. Trinquart, “Installation of the LHC Experimental Insertions”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper WEPLT007, pp. 1828-1830.
- M. Kilpatrick et al., “Interactive automated Bragg peak identification with 3D neutron scattering data”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPM117, pp. 5138-5141.
- B. Bolzon et al., “Results of the High Resolution OTR Measurements at KEK and Comparison with Simulations”, in Proc. 2nd Int. Beam Instrumentation Conf. (IBIC'13), Oxford, UK, Sep. 2013, paper MOPF04, pp. 204-207.
- K. Kruchinin, A. Lyapin, and M. McCallum, “Design, characterization, and validation of a pulsed RF burst source for In-situ beam position monitor calibration”, presented at the 14th International Beam Instrumentation Conference (IBIC'25), Liverpool, UK, Sep. 2025, paper WEDC01, unpublished.
- T. J. Fessenden, “Induction Linacs for Heavy Ion Fusion Research”, in Proc. 1984 Linear Accelerator Conf. (LINAC'84), Seeheim, Germany, May 1984, paper FRE0003, pp. 485-489.
- M. H. Woodle, “ISABELLE Superconducting Power Distribution System”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2928-2931.
- S. C. Huang, H. Guo, Y. He, M. Xu, Z. Q. Yang, and S. X. Zhang, “The Status of Nb/Cu Superconducting Cavity Activities at IMP”, in Proc. 20th International Conference on RF Superconductivity (SRF'21), East Lansing, MI, USA, Jun.-Jul. 2021, paper MOPCAV007, pp..
- W. Li et al., “Optical pump generation for long-wave infrared lasers for advanced acceleration”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper MOPR90, pp. 668-671.
- C. Madec, “Challenges in Superconducting Accelerating Module Design and Construction for High Power Proton Accelerators”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 280-285.
- P. V. Logatchev et al., “Measurement of Time Response of Laser-Triggered GaAs Photocathode”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1480-1483.
Back to search