Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] S. H. Mirza, P. Forck, H. Klingbeil, and R. Singh, “Investigations of Spatial Process Model for the Closed Orbit Feedback System at the Sis18 Synchrotron at GSI”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1301-1306. doi:10.18429/JACoW-ICALEPCS2017-THMPA02
[n] Yu. A. Budanov et al., “DEVELOPMENT OF LINEAR ACCELERATORS AS INJECTORS FOR MEDICAL ACCELERATORS IN IHEP-PROTVINO”, in Proc. RuPAC'08, Zvenigorod, Russia, Sep.-Oct. 2008, paper THBPH17, pp. XX-XX.
[n] O. K. Belyaev et al., “About FE Electron Loading of the Cavity with High Level RF Power”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper TH455, pp. 743-745.
[n] R. Cappi, L. Durieu, J.-Y. Hémery, M. Martini, J.-P. Riunaud, and Ch. Steinbach, “Fast Extracted Proton Beams at Low Energies in the CPS East Experimental Area”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TAP14, pp. 386-388.
[n] J. I. Mann, T. Arias, Y. Li, J. K. Nangoi, and J. B. Rosenzweig, “Material Normal Energy Distribution for Field Emission Analyses From Monocrystalline Surfaces”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 713-716. doi:10.18429/JACoW-IPAC2022-MOPOMS034
[n] W. F. Frentrup, A. G. Gaupp, B. Kuske, A. M. Meseck, and M. S. Scheer, “Undulators for the BESSY Soft-X-Ray FEL”, in Proc. FEL'04, Trieste, Italy, Aug.-Sep. 2004, paper THPOS03, pp. XX-XX.
[n] K. H. Lou, “Expansion of the Bevatron External Proton Beam Experimental Facilities”, in Proc. PAC'67, Washington D.C., USA, Mar. 1967, pp. 854-860.
[n] J. Keintzel et al., “FCC-ee energy calibration and polarization – towards the reference design”, presented at the IPAC'26, Deauville, France, May 2026, paper MOP1037, unpublished.
[n] D. Yu et al., “A Permanent-Magnet Focused X-Band Photoinjector”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEA52, pp. 2003-2005.
[n] I. Jirousek et al., “The Concept of the PROSCAN Patient Safety System”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper TH215, pp. XX-XX.
[n] A. Aizaz, N. T. Wright, and T. L. Grimm, “Thermal Design Studies of Niobium SRF Cavities”, in Proc. SRF'07, Beijing, China, Oct. 2007, paper WE102, pp. XX-XX.
[n] S. Hiramatsu, T. Mitsuhashi, T. Naitoh, H. Iwasaki, and Y. Yamamoto, “Measurement of Small Beam Size by the Use of SR Interferometer”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper THBR5, pp. 492-494.
[n] P. Catravas et al., “MIT Microwiggler for Free Electron Laser Applications”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TPG14, pp. 192-194.
[n] F. Kircher and M. Leininger, “Construction of Energy Doubler Correction Magnets”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3931-3934.
[n] Ch. Steinbach and M. van Rooij, “A Scanning Wire Beam Profile Monitor”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 1920-1923.
[n] Y. E. Tan, T. D. Cornall, S. A. Griffiths, S. Murphy, and E. Vettoor, “FPGA Based Fast Orbit Feedback System for the Australian Synchrotron”, in Proc. IBIC'12, Tsukuba, Japan, Oct. 2012, paper TUPA37, pp. 437-440.
[n] P. Xu, N. T. Wright, T. R. Bieler, and C. Compton, “Temperature Excursions in Nb Sheets With Imbedded Delamination Cracks”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper MOPB007, pp. 82-85.
[n] B. Wang et al., “Simulations of Laser Field Emission from Nanostructures with Image Charge Trapping and Band Structure Transitions”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 717-720. doi:10.18429/JACoW-IPAC2022-MOPOMS036
[n] K. N. Li et al., “Development of the Control System for Some Heavy Nuclides Measurement AMS Facility”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, paper WEPHA088, pp. XX-XX.
[n] J. Kang et al., “Design Study of the 30 MeV Cyclotron Magnet”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPLS078, pp. 2559-2561.
[n] J. H. Kim, H. S. Kim, Y. M. Kim, H.-J. Kwon, and Y. G. Song, “Integrated Multi-Purpose Tool for Data Processing and Analysis via EPICS PV Access”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 378. doi:10.18429/JACoW-ICALEPCS2019-MOPHA071
[n] A. Waets et al., “Heavy ion beam characterization for radiation effects testing at CERN using Monte Carlo simulations and experimental benchmarking”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 5165-5168. doi:10.18429/JACoW-IPAC2023-THPM128
[n] A. Matheisen, N. Krupka, S. Saegebarth, P. Schilling, N. Steinhau-Kuehl, and B. van der Horst, “Experiences on Retreatment of EU-XFEL Series Cavities at DESY”, in Proc. SRF'15, Whistler, Canada, Sep. 2015, paper MOPB075, pp. 296-300.
[n] P. Thieberger, M. McKeown, and H. E. Wegner, “Tests for Pulsed High Current Heavy Ion Synchrotron Injection with an MP-Tandem Van de Graaff”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2746-2749.
[n] P. M. Musumeci et al., “Acceleration of Electrons in a Diffraction Dominated IFEL”, in Proc. FEL'04, Trieste, Italy, Aug.-Sep. 2004, paper THPOS57, pp. XX-XX.
[n] G. Rakowsky, B. Bobbs, J. Brown, P. Kennedy, and G. Swoyer, “Performance of Rocketdyne Phase-optimized Pure Permanent Magnet Undulator”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2733-2736.
[n] Y.-S. Kim et al., “AC Power Supply for Wobbler Magnet of the MC-50 Cyclotron”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper WPAE062, pp. 3576-3578.
[n] R. Sobbia et al., “Cooling and thermomechanical studies for the IMPACT HIMB collimator system”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2507-2509. doi:10.18429/JACoW-IPAC2023-TUPM121
[n] C. A. Coverdale et al., “Electron Acceleration in Relativistic Plasma Waves Generated by a Single Frequency Short-Pulse Laser”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RAB01, pp. 758-760.
[n] Y. Lushtak, Y. Li, and A. Lyndaker, “Finite Element Analyses of Synchrotron Radiation Induced Stress in Beryllium Synch-Light Mirrors”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 3664-3666. doi:10.18429/JACoW-IPAC2021-WEPAB410
For LaTeX
Use Complete Form
For BibTeX
References
- S. H. Mirza, P. Forck, H. Klingbeil, and R. Singh, “Investigations of Spatial Process Model for the Closed Orbit Feedback System at the Sis18 Synchrotron at GSI”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1301-1306.
- Yu. A. Budanov et al., “DEVELOPMENT OF LINEAR ACCELERATORS AS INJECTORS FOR MEDICAL ACCELERATORS IN IHEP-PROTVINO”, in Proc. 21st Russian Particle Accelerator Conf. (RuPAC'08), Zvenigorod, Russia, Sep.-Oct. 2008, paper THBPH17, pp. XX-XX.
- O. K. Belyaev et al., “About FE Electron Loading of the Cavity with High Level RF Power”, in Proc. 1990 Linear Accelerator Conf. (LINAC'90), Albuquerque, NM, USA, Sep. 1990, paper TH455, pp. 743-745.
- R. Cappi, L. Durieu, J.-Y. Hémery, M. Martini, J.-P. Riunaud, and Ch. Steinbach, “Fast Extracted Proton Beams at Low Energies in the CPS East Experimental Area”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper TAP14, pp. 386-388.
- J. I. Mann, T. Arias, Y. Li, J. K. Nangoi, and J. B. Rosenzweig, “Material Normal Energy Distribution for Field Emission Analyses From Monocrystalline Surfaces”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 713-716.
- W. F. Frentrup, A. G. Gaupp, B. Kuske, A. M. Meseck, and M. S. Scheer, “Undulators for the BESSY Soft-X-Ray FEL”, in Proc. 26th Int. Free Electron Laser Conf. & 11th FEL Users Workshop (FEL'04), Trieste, Italy, Aug.-Sep. 2004, paper THPOS03, pp. XX-XX.
- K. H. Lou, “Expansion of the Bevatron External Proton Beam Experimental Facilities”, in Proc. 2nd Particle Accelerator Conf. (PAC'67), Washington D.C., USA, Mar. 1967, pp. 854-860.
- J. Keintzel et al., “FCC-ee energy calibration and polarization – towards the reference design”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper MOP1037, this conference.
- D. Yu et al., “A Permanent-Magnet Focused X-Band Photoinjector”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WEA52, pp. 2003-2005.
- I. Jirousek et al., “The Concept of the PROSCAN Patient Safety System”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper TH215, pp. XX-XX.
- A. Aizaz, N. T. Wright, and T. L. Grimm, “Thermal Design Studies of Niobium SRF Cavities”, in Proc. 13th Int. Conf. RF Superconductivity (SRF'07), Beijing, China, Oct. 2007, paper WE102, pp. XX-XX.
- S. Hiramatsu, T. Mitsuhashi, T. Naitoh, H. Iwasaki, and Y. Yamamoto, “Measurement of Small Beam Size by the Use of SR Interferometer”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper THBR5, pp. 492-494.
- P. Catravas et al., “MIT Microwiggler for Free Electron Laser Applications”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper TPG14, pp. 192-194.
- F. Kircher and M. Leininger, “Construction of Energy Doubler Correction Magnets”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3931-3934.
- Ch. Steinbach and M. van Rooij, “A Scanning Wire Beam Profile Monitor”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 1920-1923.
- Y. E. Tan, T. D. Cornall, S. A. Griffiths, S. Murphy, and E. Vettoor, “FPGA Based Fast Orbit Feedback System for the Australian Synchrotron”, in Proc. 1st Int. Beam Instrumentation Conf. (IBIC'12), Tsukuba, Japan, Oct. 2012, paper TUPA37, pp. 437-440.
- P. Xu, N. T. Wright, T. R. Bieler, and C. Compton, “Temperature Excursions in Nb Sheets With Imbedded Delamination Cracks”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper MOPB007, pp. 82-85.
- B. Wang et al., “Simulations of Laser Field Emission from Nanostructures with Image Charge Trapping and Band Structure Transitions”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 717-720.
- K. N. Li et al., “Development of the Control System for Some Heavy Nuclides Measurement AMS Facility”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, paper WEPHA088, pp. XX-XX.
- J. Kang et al., “Design Study of the 30 MeV Cyclotron Magnet”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper WEPLS078, pp. 2559-2561.
- J. H. Kim, H. S. Kim, Y. M. Kim, H.-J. Kwon, and Y. G. Song, “Integrated Multi-Purpose Tool for Data Processing and Analysis via EPICS PV Access”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 378.
- A. Waets et al., “Heavy ion beam characterization for radiation effects testing at CERN using Monte Carlo simulations and experimental benchmarking”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPM128, pp. 5165-5168.
- A. Matheisen, N. Krupka, S. Saegebarth, P. Schilling, N. Steinhau-Kuehl, and B. van der Horst, “Experiences on Retreatment of EU-XFEL Series Cavities at DESY”, in Proc. 17th Int. Conf. RF Superconductivity (SRF'15), Whistler, Canada, Sep. 2015, paper MOPB075, pp. 296-300.
- P. Thieberger, M. McKeown, and H. E. Wegner, “Tests for Pulsed High Current Heavy Ion Synchrotron Injection with an MP-Tandem Van de Graaff”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2746-2749.
- P. M. Musumeci et al., “Acceleration of Electrons in a Diffraction Dominated IFEL”, in Proc. 26th Int. Free Electron Laser Conf. & 11th FEL Users Workshop (FEL'04), Trieste, Italy, Aug.-Sep. 2004, paper THPOS57, pp. XX-XX.
- G. Rakowsky, B. Bobbs, J. Brown, P. Kennedy, and G. Swoyer, “Performance of Rocketdyne Phase-optimized Pure Permanent Magnet Undulator”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2733-2736.
- Y.-S. Kim et al., “AC Power Supply for Wobbler Magnet of the MC-50 Cyclotron”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper WPAE062, pp. 3576-3578.
- R. Sobbia et al., “Cooling and thermomechanical studies for the IMPACT HIMB collimator system”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPM121, pp. 2507-2509.
- C. A. Coverdale et al., “Electron Acceleration in Relativistic Plasma Waves Generated by a Single Frequency Short-Pulse Laser”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper RAB01, pp. 758-760.
- Y. Lushtak, Y. Li, and A. Lyndaker, “Finite Element Analyses of Synchrotron Radiation Induced Stress in Beryllium Synch-Light Mirrors”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 3664-3666.
Back to search