JaCoW Logo

Reference Search

Warning
Some papers titles are all uppercase, you must correct this before using this reference.

The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	S. Dastan, E. Karantzoulis, K. Manukyan, R. Nagaoka, and S. Krecic, “Study on transverse multi-bunch instability in Elettra 2.0”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1106-1109. doi:10.18429/JACoW-IPAC2023-MOPM050
[n]	A. Tron, “Limitations at Short Bunch Length Monitoring”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEA142, pp. 2190-2192. 
[n]	L. Nadolski et al., “SOLEIL synchrotron light source lastest news”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 216-219. doi:10.18429/JACoW-IPAC2025-MOPB075
[n]	S. Allison, N. Spencer, K. Underwood, D. VanOlst, and M. Zelanzy, “MPS VAX Monitor and control Software Architecture”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1884-1887. 
[n]	R. E. Thern and A. Stillman, “Full Cycle Beam Diagnostics with an Ionization Profile Monitor”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2471-2474. 
[n]	J. Chen, X. W. Du, M. H. Lin, Q. P. Wang, and Z. Wang, “Optimizing Indirect Cooling of a High Accuracy Surface Plane Mirror in Plane-Grating Monochromator”, in Proc. MEDSI'23, Beijing, China, Nov. 2023, pp. 280-282. doi:10.18429/JACoW-MEDSI2023-THPPP007
[n]	A. Stillman, “Laser Compton Polarimetry of Proton Beams”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TPB15, pp. 2560-2562. 
[n]	M. Kay, A. Alexander, R. Thornton, C. Taylor, and J. Lewellen, “Monte Carlo estimation of emittance growth during injection into the LANSCE PSR”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3583-3586. doi:10.18429/JACoW-IPAC2024-THPR38
[n]	P. Tran, C. Pellegrini, J. Yang, M. Cornacchia, and J. Corbett, “Measurements of the Octupole-Induced Amplitude-Dependent Frequency Shift in SPEAR”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RAQ17, pp. 3323-3325. 
[n]	C. Thongbai et al., “Generation of Femtosecond Electron and Photon Pulses”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper RPPT075, pp. 3946-3948. 
[n]	T. Junquera, A. Caruette, M. Fouaidy, and Q. S. Shu, “Surface Scanning Thermometers for Diagnosing the TESLA SRF Cavities”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TPP14, pp. 1648-1651. 
[n]	S. J. Burger et al., “The Electrolytic Tank Facility at the NAC”, in Proc. Cyclotrons'84, East Lansing, MI, USA, Apr.-May 1984, paper B12, pp. 63-66. 
[n]	V. Maradia, A. Lomax, D. C. Weber, D. Meer, I. Colizzi, and S. Psoroulas, “Democratization of Particles Therapy: Design of The Most Compact Multiroom Particle Therapy Facility”, presented at the IPAC'23, Venice, Italy, May 2023, paper THPM081, unpublished. 
[n]	K. Gikal et al., “Peculiarities of Producing 48Ca, 48Ti, 52Cr Beams at the DC-280 Cyclotron”, in Proc. RuPAC2021, Alushta, Crimea, Sep.-Oct. 2021, pp. 93-95. doi:10.18429/JACoW-RuPAC2021-FRA01
[n]	V. H. Haghighat, S. A. McDonald, and K. Nygård, “A New Beamline for Multi-Scale Structural Characterization of Hierarchical Materials”, presented at the MEDSI'23, Beijing, China, Nov. 2023, paper THPPP056, unpublished. 
[n]	P. Niedermayer, H. Bräuning, T. Milosic, and R. Singh, “Spill optimization system improving slow extraction at GSI”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 956-959. doi:10.18429/JACoW-IPAC2025-TUPB008
[n]	Z. Wang, J. Chen, X. W. Du, D. Feng, and Q. P. Wang, “The Heat Load Calculation in the Grating-Based Beamline at Hefei Advanced Light Facility (HALF)”, in Proc. MEDSI'23, Beijing, China, Nov. 2023, pp. 287-289. doi:10.18429/JACoW-MEDSI2023-THPPP009
[n]	M. L. Friend, C. Bronner, and M. Hartz, “Beam Induced Fluorescence Monitor R&D for the J-PARC Neutrino Beamline”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 799-802. doi:10.18429/JACoW-IBIC2016-WEPG66
[n]	G. L. Wang, “Commissioning Status of the Dalian Cohernet Light Source”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2709-2712. doi:10.18429/JACoW-IPAC2017-WEPAB058
[n]	Z. Zhang, A. Faus-Golfe, B. Bai, F. Zimmermann, H. Jiang, and K. Oide, “Monochromatization Interaction Region Optics Design for Direct s-channel production at FCC-ee”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 738-741. doi:10.18429/JACoW-IPAC2023-MOPL079
[n]	A. Issatov, P. A. Chubunov, S. V. Mitrofanov, D. K. Pugachev, and Yu. G. Teterev, “Ion Energy Measurement System on the Sample Surface for the High Energy Beam-Line of U400M Accelerator”, presented at the RuPAC2021, Alushta, Crimea, Sep.-Oct. 2021, paper WEPSC49, unpublished. 
[n]	A. Sen, S. Brandenburg, M. A. Hofstee, and M. J. van Goethem, “Vacuum Simulation for Heavy Ion Beams in the AGOR-Cyclotron”, in Proc. Cyclotrons'10, Lanzhou, China, Sep. 2010, paper MOPCP083, pp. 221-223. 
[n]	H. H. Lai, “A Design of a Slot Type Pick-up for Stochastic Cooling of a Coasting Beam”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2483-2486. 
[n]	T. Knuth, D. Krämer, E. Weihreter, I. Chertok, S. Michailov, and B. Sukhina, “The Magnet System for the BESSY II Injector Synchrotron”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TPE09, pp. 1316-1318. 
[n]	E. R. Beadle, “A 2 MHz 3-Port Analog Isolation and Fanout Module”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TPB08, pp. 2545-2547. 
[n]	S. Psoroulas, P. Fernandez Carmona, D. Meer, and D. C. Weber, “On-Line Dynamic Beam Intensity Control in a Proton Therapy Cyclotron”, in Proc. Cyclotrons'19, Cape Town, South Africa, Sep. 2019, pp. 148-151. doi:10.18429/JACoW-CYCLOTRONS2019-TUB04
[n]	R. A. Gough and M. L. Mallory, “Charge Exchange Losses During Cyclotron Acceleration: Experiment and Theory”, in Proc. Cyclotrons'78, Bloomington, IN, USA, Sep. 1978, paper F-21, pp. 2384-2387. 
[n]	B. Leblond, C. Travier, P. Georges, and P. Thomas, “CANDELA Photo-injector: The Drive Laser”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 3053-3055. 
[n]	K. Wakonig et al., “A Beamline and Experiment Control System for the SLS 2.0”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 71-77. doi:10.18429/JACoW-ICALEPCS2023-MO2AO02
[n]	D. P. Sukhanov, V. P. Cherepanov, V. V. Oreshonok, and V. V. Smaluk, “Transverse Bunch-by-bunch Digital Feedback for the VEPP-4M Collider”, in Proc. RuPAC'10, Protvino, Russia, Sep.-Oct. 2010, paper WEPSB031, pp. 236-238. 
[n]	M. Sosin, H. Mainaud Durand, F. Micolon, V. Rude, and J. M. Rutkowski, “Robust Optical Instrumentation for Accelerator Alignment Using Frequency Scanning Interferometry”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2203-2206. doi:10.18429/JACoW-IPAC2021-TUPAB307
[n]	H. Matsumoto et al., “The Precise Active Alignment Support System for Accelerator Structures”, in Proc. LINAC'02, Gyeongju, Korea, Aug. 2002, paper TH414, pp. 635-637. 
[n]	A. Kulikov, J. Seeman, and M. Zolotorev, “The PEP-II High Power Beam Dumping System”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RPE14, pp. 2032-2033. 
[n]	M. Ge et al., “High-gradient SRF Cavity R&D at Cornell University”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3017-3019. doi:10.18429/JACoW-IPAC2019-WEPRB087
[n]	Y. Yang et al., “Design and Test of a New Crystal Assembly for a Double Crystal Monochromator”, in Proc. MEDSI'23, Beijing, China, Nov. 2023, pp. 313-315. doi:10.18429/JACoW-MEDSI2023-THPPP023
[n]	Q. Zhao et al., “Design and Test of the Triple-Harmonic Buncher for the NSCL Reaccelerator”, in Proc. LINAC'08, Victoria, Canada, Sep.-Oct. 2008, paper THP069, pp. 948-950. 
[n]	M.-A. Tordeux et al., “Progress on the New Booster for SOLEIL II”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3267-3271. doi:10.18429/JACoW-IPAC2023-WEPL072
[n]	P. Wang, N. Hower, and P. G. O'Shea, “RF Phasing of the Duke Linac”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WPA13, pp. 932-934. 
[n]	M. L. Friend, “Beam Diagnosis and Soundness Check System for Neutrino Production Targets”, presented at the HB'23, Geneva, Switzerland, Oct. 2023, paper WEC1I2, unpublished. 
[n]	D. Battaglia, L. Calabretta, D. Campo, M. M. Maggiore, L. A. C. Piazza, and D. Rifuggiato, “New Design Tools for a Cyclotron Central Region”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPCH125, pp. 2215-2217. 
[n]	G. Lee, N. Bultman, T. Kanemura, M. Patil, R. Quispe-Abad, and J. Song, “Design improvement of a minichannel beam dump wing through AI-driven genetic algorithms”, in Proc. HIAT'25, East Lansing, MI, USA, Jun. 2025, pp. 251-253. doi:10.18429/JACoW-HIAT2025-WEP11
[n]	A. Pires, A.-S. Chauchat, M. Collet, V. Le Flanchec, and N. Delerue, “Emittance growth study of an electron beam in a double-alpha magnet compressor used in an Inverse Compton Scattering X-ray source”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2154-2157. doi:10.18429/JACoW-IPAC2023-TUPL172
[n]	O. Silveira and F. de Sá, “MENT algorithm for transverse phase space reconstruction at SIRIUS”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 2758-2761. doi:10.18429/JACoW-IPAC2025-THPM035
[n]	M. Kaemingk, E. Simakov, J. Rosenzweig, and P. M. Anisimov, “Calculations of emittance measurements via inverse Compton scattering”, in Proc. NAPAC'25, Sacramento, California, USA, Aug. 2025, pp. 978-981. doi:10.18429/JACoW-NAPAC2025-THP017
[n]	M. Kay, P. M. Anisimov, and C. Leon, “APPLYING MACHINE LEARNING TO LONGITUDINAL PHASE SPACE RECONSTRUCTION IN THE LANSCE CCL”, presented at the IPAC'26, Deauville, France, May 2026, paper WEP4315, unpublished. 
[n]	O. Silveira and F. de Sá, “Studies on the large residual horizontal orbit in the SIRIUS booster”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 2215-2217. doi:10.18429/JACoW-IPAC2025-WEPM103
[n]	P. Jaikaew et al., “Positron contamination in the muon beam at the J-PARC's surface muon beamline (S-line)”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 542-544. doi:10.18429/JACoW-IPAC2025-MOPM093
[n]	C. Appel et al., “First light received by Beamline Experiment Control”, presented at the ICALEPCS'25, Chicago, IL, USA, Sep. 2025, paper THPD057, unpublished. 
[n]	H. Liang et al., “Progress and Core Technologies Development of Monochromators for HEPS”, presented at the MEDSI'23, Beijing, China, Nov. 2023, paper THOBM03, unpublished. 
[n]	B. Leissner et al., “Bunch Length Measurements using a Martin Puplett Interferometer at the TESLA Test Facility Linac”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEA131, pp. 2172-2174. 
[n]	D. T. Tran, “Bandwidth Broadening in RF-Structure”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2948-2951. 
[n]	F. Micolon et al., “FELICIA – A probe to survey the RHIC magnet beampipe diameter for EIC beam screen insertion”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4393-4395. doi:10.18429/JACoW-IPAC2023-THPA184
[n]	H. J. Yuan, X. W. Du, and Q. P. Wang, “An Argon-Oxygen or Argon-Hydrogen Radio-Frequency Plasma Cleaning Device for Removing Carbon Contamination from Optical Surfaces”, in Proc. MEDSI'23, Beijing, China, Nov. 2023, pp. 79-81. doi:10.18429/JACoW-MEDSI2023-TUPYP032
[n]	D. Panasenko, “Control, Stability and Staging in Laser Wakefield Accelerators”, in Proc. LINAC'08, Victoria, Canada, Sep.-Oct. 2008, paper TU302, pp. 379-379. 
[n]	D. Guilhem et al., “Proposal for a 15 MeV Superconducting Electron Linac for the DEINOS Project”, in Proc. LINAC'08, Victoria, Canada, Sep.-Oct. 2008, paper TUP003, pp. 386-388. 
[n]	J. Du, X. W. Du, Q. P. Wang, and Z. Wang, “Influence of the Groove Curvature on the Spectral Resolution in a Varied-Line-Spacing Plane Grating Monochromator (VLS-PGM)”, in Proc. MEDSI'23, Beijing, China, Nov. 2023, pp. 67-69. doi:10.18429/JACoW-MEDSI2023-TUPYP026
[n]	A. Vella, D. Mirarchi, S. Redaelli, and G. Valentino, “Crystal Channelling Optimisation in the LHC Using Reinforcement Learning”, presented at the IPAC'26, Deauville, France, May 2026, paper MOP1115, unpublished. 
[n]	H. Wiedemann et al., “SURIYA, A SOURCE OF FEMTO-SECOND ELECTRON AND PHOTON PULSES”, in Proc. APAC'01, Beijing, China, Sep. 2001, paper TUDM01, pp. XX-XX. 
[n]	J. Chen, X. W. Du, M. H. Lin, Q. P. Wang, and Z. Wang, “Optimization of Thermal Deformation of a Horizontally Deflecting High-Heat-Load Mirror Based on eInGa Bath Cooling”, in Proc. MEDSI'23, Beijing, China, Nov. 2023, pp. 283-286. doi:10.18429/JACoW-MEDSI2023-THPPP008

For LaTeX

Use Complete Form

For BibTeX

References

Back to search