JaCoW Logo

Reference Search

Warning
Please note that we have recently received feedback indicated that atleast one of these reference may have a problem.

The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	S. Ramamoorthy, S. Buda, J. Oliva, and G. Ramirez, “PLC Interface to NSLS Front-End Systems”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper WP511, pp. XX-XX. 
[n]	J. Safranek and S. L. Kramer, “Experimental Calibration of VUV Ring Optics”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 3V005, pp. 748-750. 
[n]	R. Paparella et al., “Status of the INFN-LASA Contribution to the PIP-II Linac”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, pp. 787. doi:10.18429/JACoW-SRF2021-THPCAV005
[n]	Z. Sun et al., “Surface Oxides on Nb and Nb3Sn Surfaces: Toward a Deeper Understanding”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, pp. 836. doi:10.18429/JACoW-SRF2021-THPTEV004
[n]	P. K. Sigg, “SUMMARY OF THE 3RD WORKSHOP ON HIGH POWER RF-SYSTEMS FOR ACCELERATORS”, in Proc. Cyclotrons'04, Tokyo, Japan, Oct. 2004, paper 20C1, pp. XX-XX. 
[n]	P. Sjöblom, A. Milan-Otero, and A. G. Persson, “Multiplexer for the Em# Electrometer”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1548-1551. doi:10.18429/JACoW-ICALEPCS2017-THPHA070
[n]	Z. Sun, Z. Baraissov, M. Liepe, D. A. Muller, T. E. Oseroff, and M. O. Thompson, “Materials Design for Superconducting RF Cavities: Electroplating Sn, Zr, and Au onto Nb and and Chemical Vapor Deposition”, in Proc. SRF'23, Grand Rapids, MI, USA, Jun. 2023, pp. 401-404. doi:10.18429/JACoW-SRF2023-TUPTB006
[n]	K. K. Kizhupadath, R. A. V. Kumar, K. Mahavar, S. Joshi, and A. Sharma, “Design & Implementation Of LabVIEWTM Based GUI for Remote Operation and Control of Excimer Laser for Plasma Wakefield Accelerator Experiment”, in Proc. PCaPAC'12, Kolkata, India, Dec. 2012, paper WEPD23, pp. 46-50. 
[n]	L. Shang, Y. Lu, F. Shang, and Y. Y. Wang, “The New Injection System of the HLS II”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPWA013, pp. 687-689. 
[n]	A. De et al., “An Embedded System Based Computer Controlled Process Automation for Recovery and Purification of 99mTc from (n, )99Mo”, in Proc. PCaPAC'12, Kolkata, India, Dec. 2012, paper THPD36, pp. 211-213. 
[n]	T. Honda et al., “Single-Pass Monitoring of Beam Position at SOR-RING”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper TUP046L, pp. 1651-1653. 
[n]	J. F. Tooker et al., “System Engineering in the SSC Linac”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper TU4-12, pp. 326-328. 
[n]	V. Bharadwaj, A. Braun, M. Halling, J. A. Holt, and D. Still, “Fermilab Contributions to the FFTB”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RPC21, pp. 752-754. 
[n]	P. Thompson et al., “Superconducting Sextupoles and Trim Quadrupoles for RHIC”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper FAQ04, pp. 1396-1398. 
[n]	O. Nezhevenko et al., “Magnicon - High Power RF Source for TESLA”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1924-1927. 
[n]	H. Ghasem, H.-C. Chao, I. Martin, and W. Shields, “Collimator study for the Diamond-II storage ring”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1250-1253. doi:10.18429/JACoW-IPAC2024-TUPG19
[n]	Z. Zhang, D. Z. Chen, D. Li, M. R. Pan, and C. Zuo, “3D Numerical Simulation of Extraction of a Large-power Negative Ion Source”, in Proc. ICAP'15, Shanghai, China, Oct. 2015, pp. 103-105. doi:10.18429/JACoW-ICAP2015-WEP20
[n]	J. P. Schapira, “A Possible Design of an Axial Injection System into the Proposed Superconducting Cyclotron at Orsay”, in Proc. Cyclotrons'81, Caen, France, Sep. 1981, paper DP-10, pp. 307-309. 
[n]	B. Laune, “Status Report on the AGOR Superconducting Cyclotron”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 43-46. 
[n]	P. L. Lemut, S. Zorzut, B. Batagelj, J. Tratnik, and M. Leskovec, “Evaluation of Short and Long-Term Stability of the 2998 MHz Reference-Clock Transfer System”, in Proc. BIW'12, Newport News, VA, USA, Apr. 2012, paper MOPG009, pp. 41-43. 
[n]	P. Khare, P. K. Kush, and M. G. Karmarkar, “Approach Towards Establishing Cryogenic Test Facility for SCRF Cavities of 10 MeV Proton LINAC”, in Proc. SRF'03, Lübeck, Germany, Sep. 2003, paper TUP17, pp. 320-321. 
[n]	C. Mallik et al., “Heavy Ion Acceleration Using 224 CM Cyclotron at Kolkata”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper MOP10005, pp. XX-XX. 
[n]	P. Solans, I. Bellafont, J. Ocampo, and F. Perez, “DLLRF for the active harmonic RF system of ALBA-II”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4156-4159. doi:10.18429/JACoW-IPAC2023-THPA085
[n]	G. Verma, B. B. Biswas, S. K. Jain, M. Kalra, and D. A. Roy, “Embedded PC Based Controller for Use in VME Bus Based Data Acquisition System”, in Proc. PCaPAC'12, Kolkata, India, Dec. 2012, paper WEPD33, pp. 65-67. 
[n]	W. Duckitt, J. Abraham, J. L. Conradie, M. J. Van Niekerk, and T. R. Niesler, “A New Digital Low-level RF Control System for Cyclotrons”, in Proc. Cyclotrons'16, Zurich, Switzerland, Sep. 2016, pp. 258-262. doi:10.18429/JACoW-Cyclotrons2016-WEB01
[n]	L. Shpani et al., “Study of Chemical Treatments to Optimize Niobium-3 Tin Growth in the Nucleation Phase”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 1295-1298. doi:10.18429/JACoW-IPAC2022-TUPOTK036
[n]	G. Tranquille et al., “Cooled Beam Diagnostics on LEIR”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPC102, pp. 1296-1298. 
[n]	J. C. Brutus et al., “Mechanical Design and 3-D Coupled RF, Thermal-Structural Analysis of Normal Conducting 704 MHz and 2.1 GHz Cavities for LEReC Linac”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 525-527. doi:10.18429/JACoW-IPAC2016-MOPMY007
[n]	L. Shpani et al., “Development of High-performance Niobium-3 Tin Cavities at Cornell University”, in Proc. SRF'23, Grand Rapids, MI, USA, Jun. 2023, pp. 600-606. doi:10.18429/JACoW-SRF2023-WEIAA04
[n]	M. M. Strohmeier et al., “Emittance Measurements at the LBNL ECR and AECR-U Ion Sources Using a Pepper-Pot Emittance Scanner”, in Proc. BIW'10, Santa Fe, NM, USA, May 2010, paper TUPSM061, pp. 302-306. 
[n]	T. Shintake et al., “C-Band Linac RF-System for e+e- Linear Collider”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RPA20, pp. 1099-1101. 
[n]	C. Ohmori et al., “RF Systems for JHF Synchrotrons”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 5E104, pp. 602-604. 
[n]	G. A. Filatov et al., “Beam Lines and Stations for Applied Research Based on Ion Beams Extracted from Nuclotron”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 3096-3098. doi:10.18429/JACoW-IPAC2022-THPOMS054
[n]	J. F. Denis, D. Bogard, J.-F. Gournay, Y. Lussignol, and P. Mattei, “Diagnostic Controls of IFMIF-EVEDA Prototype Accelerator”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper THPPC026, pp. 1144-1146. 
[n]	X. Liu, H. Yao, X. Wang, Y. Li, Y. Xiong, and Z. Wang, “Multiturn injection design and optimization for XiPAF-upgrading synchrotron”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2553-2556. doi:10.18429/JACoW-IPAC2023-TUPM136
[n]	M. Wendt, I. A. Alonso Romero, S. J. Calvo, W. H?â, O. R. Jones, and E. Montesinos, “A Broadband Transverse Kicker Prototype for Intra-Bunch Feedback in the CERN SPS”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1812-1815. doi:10.18429/JACoW-IPAC2017-TUPIK053
[n]	V. Variola et al., “Titanium Nitride Coating of RF Ceramic Windows by Reactive DC Magnetron Sputtering”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPP162, pp. 931-933. 
[n]	I. Carvalho de Almeida, A. Pontes Barbosa Lima, and B. Ramos, “Impedance characterization of the RF-shielded bellows for Sirius SRF cavities”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 3439-3441. doi:10.18429/JACoW-IPAC2023-WEPL143
[n]	N. M. Verboncoeur et al., “Update on Cornell High Pulsed Power Sample Host Cavity”, in Proc. SRF'23, Grand Rapids, MI, USA, Jun. 2023, pp. 841-846. doi:10.18429/JACoW-SRF2023-WEPWB108
[n]	J. P. Delahaye and J. P. Potier, “A Novel Injection and Extraction Scheme for Short Bunch Separation in Accelerator Rings”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2373-2376. 
[n]	P. Mandrillon, N. Brassart, F. Farley, J. Herault, R. Ostojic, and A. Susini, “Commissioning and Implementation of the MEDICYC Cyclotron Programme”, in Proc. Cyclotrons'89, Berlin, Germany, May 1989, paper E-05, pp. 156-159. 
[n]	R. J. Faehl and G. Gisler, “Intense Ion Ring Acceleration in a Flux Compressing Liner”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 3201-3204. 
[n]	V. E. Balakin and I. V. Syrachev, “Status of VLEPP RF Power Muliplier (VPM)”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1173-1176. 
[n]	B. Feng, Z. Lu, and L. Zhang, “Observation of Operating Mode in Raman Free Electron Lasers”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper TH-34, pp. 780-782. 
[n]	M. Thomas et al., “Detuning of the NSLS UV RF Cavity to Compensate for 1 Ampere of Stored Beam”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 1859-1861. 
[n]	Y. Lee et al., “Multicusp Ion Source for Ion Projection Lithography”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEP144, pp. 2575-2577. 
[n]	G. L. Wang, D. X. Dai, G. R. Wu, X. M. Yang, and W. Q. Zhang, “Operating of SXFEL in a Single Stage High Gain Harmonic Generation Scheme”, in Proc. FEL'15, Daejeon, Korea, Aug. 2015, pp. 29-33. doi:10.18429/JACoW-FEL2015-MOC04
[n]	P. Mandrillon, Ch. Rocher, R. Ostojic, A. Susini, and G. Ryckewaert, “Status of the Feasibility Studies of the European Light Ion Medical Accelerator”, in Proc. Cyclotrons'89, Berlin, Germany, May 1989, paper E-04, pp. 152-155. 
[n]	H. Do, H. Jung, and M. O. Hyun, “Development of RF Fundamental Coupler for 325 MHz Superconducting Single Spoke Resonator”, presented at the IPAC'23, Venice, Italy, May 2023, paper WEPA165, unpublished. 
[n]	G. Tosin et al., “Design of Magnet Prototypes for the new Brazilian Synchrotron Light Source - SIRIUS”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper WEPD003, pp. 3084-3086. 
[n]	N. C. Patel, C. K. Chavda, and K. G. Patel, “Serial Multiplexed Based Data Acquisition and Control System”, in Proc. PCaPAC'12, Kolkata, India, Dec. 2012, paper WEPD13, pp. 29-31. 
[n]	C. Travier, M. Bernard, P. Georges, B. Leblond, G. Roger, and P. Thomas, “First Operation of a Femtosecond Laser Driven Photoinjector”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1462-1465. 
[n]	G. Batskikh, G. Mamaev, T. Latypov, I. Tenyakov, and Y. Tereshkin, “MEB Resitive Magnets Prototypes Manufacturing”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper FAP24, pp. 1387-1389. 
[n]	P. Solans et al., “Active 3rd harmonic RF system for ALBA”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper WEBD2, unpublished. 
[n]	K. Saifee, A. Chauhan, P. Fatnani, P. Gothwal, and C. P. Navathe, “Fast Data Acquisition System for Booster Supplies Readback”, in Proc. PCaPAC'12, Kolkata, India, Dec. 2012, paper WEPD09, pp. 18-19. 
[n]	P. K. Sigg, “A Variable, High Speed Beam-Power Absorber”, in Proc. Cyclotrons'89, Berlin, Germany, May 1989, paper F2-05, pp. 212-215. 
[n]	D. Boussard, “Self Focusing in Heavy Ion Linacs”, in Proc. LINAC'66, Los Alamos, NM, USA, Oct. 1966, paper III-03, pp. 96-103. 
[n]	J. Gao et al., “Performance Comparison of the Single-Cell Large Grain Cavities Treated by EP and CP”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU4PBC03, pp. 783-785. 
[n]	H. W. Mostert et al., “Two-Dimensional Ionization Beam Profile Measurement”, in Proc. DIPAC'09, Basel, Switzerland, May 2009, paper TUPD38, pp. 384-386. 
[n]	N. Jobert, F. Alves, and S. K. Kubsky, “Estimation of the Temperature Fluctuations Harshness Regarding Stability of Structures in the Nanometer Range”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 133-140. doi:10.18429/JACoW-MEDSI2016-TUCA03
[n]	A. M. Tikhomirov et al., “Sub Channel SOCHI of the NICA Accelerator Complex. Design Overview and Rigging at the NICA Accelerator Complex. Details of the Vacuum System”, presented at the RuPAC2021, Alushta, Crimea, Sep.-Oct. 2021, paper MOPSA32, unpublished. 
[n]	S. Cantacuzene, P. Bosland, J. Gobin, M. Juillard, and J. Martignac, “Elaboration and Characterization of Nb and NbTiN Superconducting Thin Films for RF Applications”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 2074-2077. 
[n]	E. Ciapala et al., “Commissioning of the 400 MHz LHC RF System”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPP124, pp. 847-849. 
[n]	M. A. Trump, D. R. Machen, M. A. Paciotti, E. J. Schneider, and D. A. Swenson, “Bead Perturbation Measurement”, in Proc. LINAC'70, Batavia, IL, USA, Sep.-Oct. 1970, paper K-8, pp. 1151-1155. 
[n]	R. Keller, E. Forest, H. Nishimura, and M. S. Zisman, “Study of a Relaxed" ALS Storage Ring Lattice"”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1479-1482. 
[n]	R. H. A. Farias et al., “Status of the 476 MHz 50 kW Solid State Amplifier for the LNLS Storage Ring”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPEB041, pp. 3972-3974. 
[n]	C. J. R. Duncan et al., “A Generic Software Platform for Rapid Prototyping of Online Control Algorithms”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 4063-4065. doi:10.18429/JACoW-IPAC2019-THPRB100
[n]	Dr. Kuroda et al., “Development of Compact Soft X-ray Source Based on Laser Undulator”, in Proc. FEL'04, Trieste, Italy, Aug.-Sep. 2004, paper TUPOS27, pp. XX-XX. 
[n]	A. J. Otter, N. Marks, and P. A. Reeve, “Combined AC Corrector Magnets”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2898-2901. 
[n]	J. Keane et al., “X-Ray RF System Upgrade at the NSLS”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 141-144. 
[n]	G. Decker et al., “Global DC Closed Orbit Correction Experiments on the NSLS X-Ray Ring and SPEAR”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2275-2278. 
[n]	J. Tong, M. Gu, B. Liu, Y. F. Liu, and R. Wang, “Design and Simulation of Thin Eddy-Current Septum for Injection of Diffraction Limited Storage Ring”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3908-3911. doi:10.18429/JACoW-IPAC2019-THPRB043
[n]	S. Burger, A. Boccardi, E. Bravin, A. Rabiller, and R. S. Sautier, “A New Fast Acquisition Profile for the LHC and the SPS”, in Proc. DIPAC'11, Hamburg, Germany, May 2011, paper MOPD59, pp. 182-184. 
[n]	M. de Jong, “Overview of New Light Sources”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TOPA002, pp. 220-223. 
[n]	S. C. Joshi et al., “Prototype Engineering Design of 350 MHz 4.5 MeV RFQ for Proposed Proton Linac for Indian ADS Program”, in Proc. LINAC'02, Gyeongju, Korea, Aug. 2002, paper TH470, pp. 758-760. 
[n]	S. Biri, J. P?ílink?ís, and A. Valek, “Heavy Ion Facility in ATOMKI”, in Proc. Cyclotrons'92, Vancouver, Canada, Jul. 1992, paper I-20, pp. 99-101. 
[n]	R. A. Bosch, K. J. Kleman, and J. Wu, “Multi-Stage Gain of the Microbunching Instability”, in Proc. FEL'10, Malmö, Sweden, Aug. 2010, paper WEPB49, pp. 508-511. 
[n]	R. Biscardi et al., “Progress on Bunch Lengthening at the NSLS VUV Ring”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1326-1329. 
[n]	J. C. Collins et al., “Computer Control Strategies at SIN”, in Proc. Cyclotrons'78, Bloomington, IN, USA, Sep. 1978, paper F-08, pp. 2337-2340. 
[n]	R. H. Farias et al., “LNLS Control System”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper TUP062L, pp. 1791-1793. 
[n]	P. Wanderer et al., “Construction and Testing of Arc Dipoles and Quadrupoles for the Relativistic Heavy Ion Collider (RHIC) at BNL”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TPE04, pp. 1293-1297. 
[n]	K. Volk et al., “A Compact High Brilliance Ion Soruce for RFQ Injection”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1438-1441. 
[n]	E. Ahmadi, H. Ghasem, and J. Rahighi, “Developing Matlab-based Accelerator Physics Application for the ILSF Commissioning and Operation”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3143-3145. doi:10.18429/JACoW-IPAC2014-THPRO106
[n]	R. C. York et al., “The Superconducting Super Collider Low Energy Booster: A Status Report”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 62-65. 
[n]	S. An, K. Gu, X. J. Liu, J. Q. Wu, and W. Zhang, “Use Interrupt Driven Mode to Redesign an IOC for Digital Power Supply at SSC-LINAC”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 98-99. doi:10.18429/JACoW-ICALEPCS2015-MOPGF001
[n]	K. L. Junck and E. S. McCrory, “Beam Position Correction in the Fermilab Linac”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper TH-76, pp. 881-883. 
[n]	K. Mourougayane et al., “Design Considerations for Development of Distributed Data Acquisition and Control System (DDACS) for Radio-active Ion Beam (RIB) Facility”, in Proc. PCaPAC'12, Kolkata, India, Dec. 2012, paper THPD49, pp. 234-238. 
[n]	F. Cianciosi et al., “The Girders System for the New ESRF Storage Ring”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 147-151. doi:10.18429/JACoW-MEDSI2016-TUCA06
[n]	A. Lueangaramwong, H. Ghasem, I. Martin, and A. Morgan, “Study of aperture sharing injection scheme for Diamond-II”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1152-1155. doi:10.18429/JACoW-IPAC2023-MOPM073
[n]	K. W. Leo, T. Adachi, T. Kawakubo, T. Monma, K. Takayama, and T. S. Dixit, “A Compact Hadron Driver for Cancer Therapies with Continuous Energy Sweep Scanning”, in Proc. HIAT'15, Yokohama, Japan, Sep. 2015, paper FRM1C03, pp. 291-293. 
[n]	T. Kroc, “Continued Conditioning of the Fermilab 400 MeV Linac High-Gradient Side-Coupled Cavities”, in Proc. LINAC'96, Geneva, Switzerland, Aug. 1996, paper TUP08, pp. 338-339. 
[n]	W. X. Zhou et al., “The Remote Control System for LAPECR1”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPEA022, pp. 3192-3194. 
[n]	R. Monge et al., “Integration of a Stripline Kicker Prototype for CLIC Project Into ALBA Storage Ring”, in Proc. MEDSI'16, Barcelona, Spain, Sep. 2016, pp. 230-232. doi:10.18429/JACoW-MEDSI2016-TUPE29
[n]	V. A. Lebedev, R. J. Pasquinelli, and S. J. Werkema, “Beam Based Measurements for Stochastic Cooling Systems at Fermilab”, in Proc. COOL'07, Bad Kreuznach, Germany, Sep. 2007, paper THAP15, pp. 198-201. 
[n]	S. Krinsky and J. Safranek, “Plans to Increase Source Brightness of NSLS X-Ray Ring”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1491-1494. 
[n]	J. Komppula, W. H?â, and K. S. B. Li, “Simulation Tools for the Design and Performance Evaluation of Transverse Feedback Systems”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1912-1915. doi:10.18429/JACoW-IPAC2017-TUPIK091
[n]	A. D. Ghodke and D. Angal-Kalinin and G Singh, “KICKER CHAMBER METALLIZATION INDUCED EFFECTS ON THE BEAM IN INDUS-1”, in Proc. APAC'01, Beijing, China, Sep. 2001, paper THCM04, pp. XX-XX. 
[n]	D. Berkaev, O. Belikov, V. Kozak, P. Shatunov, and A. Medvedko, “SYSTEM OF POWER SUPPLY RIPPLES MEASUREMENT FOR VEPP-2000 COLLIDER”, in Proc. RuPAC'08, Zvenigorod, Russia, Sep.-Oct. 2008, paper TUCPH12, pp. XX-XX. 
[n]	S. M. Polozov and V. V. Dmitriyeva, “Accelerator Physics and Education: MEPhI Experience and Problems”, presented at the RuPAC2021, Alushta, Crimea, Sep.-Oct. 2021, paper TUZ01, unpublished. 
[n]	E. Forest, H. Nishimura, D. S. Robin, Y. Wu, and A. A. Zholents, “Mini-Beta Lattice for the Femto-Second X-Ray Source at the ALS”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUP3A17, pp. 1098-1100. 
[n]	A. Valek, S. Biri, I. Sz??cs, and J. V?ímosi, “Test Measurements of the Debrecen ECRIS Subsystems”, in Proc. Cyclotrons'95, Cape Town, South Africa, Oct. 1995, paper G-08, pp. 397-400. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search