Warning
Some papers have malformed authors, please correct this before using these references.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] A. Citron, “Status Report on the Feasibility Study for a Superconducting Linear Accelerator for Protons”, in Proc. LINAC'66, Los Alamos, NM, USA, Oct. 1966, paper X-03, pp. 497-498.
[n] D. R. Bett, A. Boccardi, M. Krupa, and M. Wendt, “Simulation of the Signal Processing for the New Interaction Region BPMs of the High Luminosity LHC”, in Proc. IBIC'20, Santos, Brazil, Sep. 2020, pp. 120-123. doi:10.18429/JACoW-IBIC2020-WEPP12
[n] X. H. Chen and K.-U. Kasemir, “Bringing Control System User Interfaces to the Web”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper THCOAAB03, pp. 1048-1051.
[n] C. Chu et al., “Application Programming Structure and Physics Applications”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPPE015, pp. 2360-2362.
[n] L. Johnston, J. Faust, W. Pierce, and M. Stangenes, “A Low Frequency Beam Position Monitor”, in Proc. PAC'67, Washington D.C., USA, Mar. 1967, pp. 1106-1111.
[n] T. Duda, C. Edelmann, and N. Marquardt, “A New Technique for Thin-Film Coating of Vacuum Vessels with Metal or Carbon Containing Non-Evaporable Getters”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP03E, pp. 2184-2186.
[n] T. Nakamura, T. Aoki, K. Fukami, K. Kobayashi, M. Shoji, and H. Yonehara, “Tune Tracking RFKO Bunch Purification with Bunch-by-bunch Feedback at SPring-8”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper THP072, pp. 803-805.
[n] E. Prebys et al., “Statistical Measurement of Longitudinal Beam Halo in Fermilab Recycler”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2742-2744. doi:10.18429/JACoW-IPAC2019-WEPGW106
[n] C. Widmann et al., “Beam Transport System from a Laser Wakefield Accelerator to a Transverse Gradient Undulator”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2803-2806. doi:10.18429/JACoW-IPAC2014-THOBA03
[n] E. L. Williams Jr and S. Lawson, “Control Systems on Low Cost Computers”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TOPB009, pp. 288-290.
[n] F. D. Hudson, “Build the Future Harnessing Advanced Technology Innovations and Inclusion”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, paper TUKPP01, pp. XX-XX.
[n] E. M. Sommer et al., “Commissioning of Super-ACO”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 46-49.
[n] J. J. Tian, H. Hao, G. Liu, H. L. Luo, X. Q. Wang, and H. L. Wu, “Temperature and Optimize Design of Beam Window in the Accelerator”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper THP029, pp. 2175-2177.
[n] S. M. Hartman, “SNS Instrument Data Acquisition and Controls”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUPPC076, pp. 755-758.
[n] G. DiPirro, G. Mazzitelli, I. Sfiligoi, and A. Stecchi, “The Evolution of the DAFNE Control System: A History of Liberation from Hardware”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper WEAT003, pp. XX-XX.
[n] V. Palmieri, F. Stivanello, and M. Valentino, “Flux-Gate Magnetometry: The Possibility to Apply a Novel Tool to Monitor Niobium Chemistry”, in Proc. SRF'99, Santa Fe, NM, USA, Nov. 1999, paper TUP006, pp. 153-158.
[n] S. Wang et al., “Assembly, alignment and tuning of the XiPAF DTL”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1284-1287. doi:10.18429/JACoW-IPAC2023-MOPM138
[n] A. Thiel, M. Ebbeni, and H. Tarawneh, “Apple II Insertion Devices Made at MAXIV”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 6-10. doi:10.18429/JACoW-MEDSI2018-TUOPMA04
[n] Z. Duan et al., “Simulation of Injection Efficiency for the High Energy Photon Source”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1514-1517. doi:10.18429/JACoW-IPAC2019-TUPGW048
[n] K.-H. Park et al., “Performance Test Results of Magnet Power Supply”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 118-120. doi:10.18429/JACoW-LINAC2018-MOPO041
[n] H. Dzitko et al., “Operational Efficiency of the AIRIX Accelerator Since its Commissioning”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper THPPR025, pp. 4017-4019.
[n] A. C. Butterworth et al., “First Beam Commissioning of the 400 MHz LHC RF System”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE5PFP074, pp. 2180-2182.
[n] L. Giannessi, E. Allaria, F. Bencivenga, G. De Ninno, C. Masciovecchio, and G. Penco, “Experiments with Coherent Pulses at FERMI”, in Proc. IPAC'20, Caen, France, May 2020, paper MOVIR10, pp. XX-XX.
[n] M. P. Donadio, J. R. Piton, and H. D. de Almeida, “Quick Experiment Automation Made Possible Using FPGA in LNLS”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 229-232. doi:10.18429/JACoW-ICALEPCS2015-MOPGF057
[n] J. Kulesza, N. Chen, and A. Deyhim, “Design of Control Instrumentation of two In-Vacuum Undulators IVU25s”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPMS026, pp. 1236-1238.
[n] M. Tomizawa et al., “Model Measurement and Present Status of Interdigital-H Linac at INS”, in Proc. LINAC'94, Tsukuba, Japan, Aug. 1994, paper TH-26, pp. 765-767.
[n] B. R. Blomberg et al., “Planned High-brightness Channeling Radiation Experiment at Fermilab's Advanced Superconducting Test Accelerator”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1457-1459. doi:10.18429/JACoW-IPAC2014-TUPME044
[n] N/A, “N/A”, in Proc. ICAP'09, San Francisco, CA, USA, Aug.-Sep. 2009, paper FR1IOPK02, pp. XX-XX.
[n] M. Steck et al., “An Electron Cooling System for the Proposed HESR Antiproton Storage Ring”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper WEPLT056, pp. 1969-1971.
For LaTeX
Use Complete Form
For BibTeX
References
- A. Citron, “Status Report on the Feasibility Study for a Superconducting Linear Accelerator for Protons”, in Proc. 1966 Linear Accelerator Conf. (LINAC'66), Los Alamos, NM, USA, Oct. 1966, paper X-03, pp. 497-498.
- D. R. Bett, A. Boccardi, M. Krupa, and M. Wendt, “Simulation of the Signal Processing for the New Interaction Region BPMs of the High Luminosity LHC”, in Proc. 9th Int. Beam Instrumentation Conf. (IBIC'20), Santos, Brazil, Sep. 2020, pp. 120-123.
- X. H. Chen and K.-U. Kasemir, “Bringing Control System User Interfaces to the Web”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper THCOAAB03, pp. 1048-1051.
- C. Chu et al., “Application Programming Structure and Physics Applications”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper WPPE015, pp. 2360-2362.
- L. Johnston, J. Faust, W. Pierce, and M. Stangenes, “A Low Frequency Beam Position Monitor”, in Proc. 2nd Particle Accelerator Conf. (PAC'67), Washington D.C., USA, Mar. 1967, pp. 1106-1111.
- T. Duda, C. Edelmann, and N. Marquardt, “A New Technique for Thin-Film Coating of Vacuum Vessels with Metal or Carbon Containing Non-Evaporable Getters”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper TUP03E, pp. 2184-2186.
- T. Nakamura, T. Aoki, K. Fukami, K. Kobayashi, M. Shoji, and H. Yonehara, “Tune Tracking RFKO Bunch Purification with Bunch-by-bunch Feedback at SPring-8”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper THP072, pp. 803-805.
- E. Prebys et al., “Statistical Measurement of Longitudinal Beam Halo in Fermilab Recycler”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2742-2744.
- C. Widmann et al., “Beam Transport System from a Laser Wakefield Accelerator to a Transverse Gradient Undulator”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2803-2806.
- E. L. Williams Jr and S. Lawson, “Control Systems on Low Cost Computers”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TOPB009, pp. 288-290.
- F. D. Hudson, “Build the Future Harnessing Advanced Technology Innovations and Inclusion”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, paper TUKPP01, pp. XX-XX.
- E. M. Sommer et al., “Commissioning of Super-ACO”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 46-49.
- J. J. Tian, H. Hao, G. Liu, H. L. Luo, X. Q. Wang, and H. L. Wu, “Temperature and Optimize Design of Beam Window in the Accelerator”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper THP029, pp. 2175-2177.
- S. M. Hartman, “SNS Instrument Data Acquisition and Controls”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper TUPPC076, pp. 755-758.
- G. DiPirro, G. Mazzitelli, I. Sfiligoi, and A. Stecchi, “The Evolution of the DAFNE Control System: A History of Liberation from Hardware”, in Proc. 8th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'01), San Jose, CA, USA, Nov. 2001, paper WEAT003, pp. XX-XX.
- V. Palmieri, F. Stivanello, and M. Valentino, “Flux-Gate Magnetometry: The Possibility to Apply a Novel Tool to Monitor Niobium Chemistry”, in Proc. 9th Int. Conf. RF Superconductivity (SRF'99), Santa Fe, NM, USA, Nov. 1999, paper TUP006, pp. 153-158.
- S. Wang et al., “Assembly, alignment and tuning of the XiPAF DTL”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPM138, pp. 1284-1287.
- A. Thiel, M. Ebbeni, and H. Tarawneh, “Apple II Insertion Devices Made at MAXIV”, in Proc. 10th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'18), Paris, France, Jun. 2018, pp. 6-10.
- Z. Duan et al., “Simulation of Injection Efficiency for the High Energy Photon Source”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 1514-1517.
- K.-H. Park et al., “Performance Test Results of Magnet Power Supply”, in Proc. 29th Linear Accelerator Conf. (LINAC'18), Beijing, China, Sep. 2018, pp. 118-120.
- H. Dzitko et al., “Operational Efficiency of the AIRIX Accelerator Since its Commissioning”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper THPPR025, pp. 4017-4019.
- A. C. Butterworth et al., “First Beam Commissioning of the 400 MHz LHC RF System”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE5PFP074, pp. 2180-2182.
- L. Giannessi, E. Allaria, F. Bencivenga, G. De Ninno, C. Masciovecchio, and G. Penco, “Experiments with Coherent Pulses at FERMI”, in Proc. 11th Int. Particle Accelerator Conf. (IPAC'20), Caen, France, May 2020, paper MOVIR10, pp. XX-XX.
- M. P. Donadio, J. R. Piton, and H. D. de Almeida, “Quick Experiment Automation Made Possible Using FPGA in LNLS”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 229-232.
- J. Kulesza, N. Chen, and A. Deyhim, “Design of Control Instrumentation of two In-Vacuum Undulators IVU25s”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUPMS026, pp. 1236-1238.
- M. Tomizawa et al., “Model Measurement and Present Status of Interdigital-H Linac at INS”, in Proc. 1994 Linear Accelerator Conf. (LINAC'94), Tsukuba, Japan, Aug. 1994, paper TH-26, pp. 765-767.
- B. R. Blomberg et al., “Planned High-brightness Channeling Radiation Experiment at Fermilab's Advanced Superconducting Test Accelerator”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1457-1459.
- N/A, “N/A”, in Proc. 10th Int. Computational Accelerator Physics Conf. (ICAP'09), San Francisco, CA, USA, Aug.-Sep. 2009, paper FR1IOPK02, pp. XX-XX.
- M. Steck et al., “An Electron Cooling System for the Proposed HESR Antiproton Storage Ring”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper WEPLT056, pp. 1969-1971.
Back to search