JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	K. Galaydych, I. N. Onishchenko, and G. V. Sotnikov, “Wakefields and Transverse Bunch Dynamics Studies of a Plasma-Dielectric Accelerating Structure”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 542-545. doi:10.18429/JACoW-IPAC2021-MOPAB156
[n]	H. Zen, K. Tanaka, Y. Zhao, and H. Ohgaki, “Commissioning of new photocathode RF gun for oscillator-type mid-infrared free-electron laser at Kyoto University”, presented at the IPAC'23, Venice, Italy, May 2023, paper THPL046, unpublished. 
[n]	G. Ricci et al., “Real time crystal collimation monitoring at the CERN Large Hadron Collider”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1750-1753. doi:10.18429/JACoW-IPAC2024-TUPS42
[n]	Z. Qiao et al., “Surface Twist Characterization and Compensation of an Elliptically Bent Hard X-Ray Mirror”, in Proc. MEDSI'20, Chicago, USA, Jul. 2021, pp. 99. doi:10.18429/JACoW-MEDSI2020-TUOA01
[n]	O. Utke, S. Chaichuay, S. Klinkhieo, S. Pongampai, K. Sittisard, and S. Srichan, “Design of Magnet Girder System for Siam Photon Source II”, in Proc. MEDSI'20, Chicago, USA, Jul. 2021, pp. 138. doi:10.18429/JACoW-MEDSI2020-TUPA10
[n]	H.-W. Luo, M.-S. Chiu, N.-Y. Huang, and P. Chou, “Evaluation of top-up injection by a single nonlinear kicker in Taiwan Photon Source”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3254-3257. doi:10.18429/JACoW-IPAC2024-THPG05
[n]	W. Gu, H. Chen, J. Shi, and H. Zha, “X-band electron linear accelerator design for intraoperative radiotherapy”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1288-1290. doi:10.18429/JACoW-IPAC2023-MOPM140
[n]	A. Ratti et al., “Fabrication and Testing of the First Module of the SNS RFQ”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper THD05, pp. 911-913. 
[n]	R. M. Thurman-Keup, M. El Baz, and V. E. Scarpine, “A Simulation of the Photoionization of H⁻ Together With the Subsequent Tracking of the Liberated Electrons”, in Proc. IBIC'23, Saskatoon, Canada, Sep. 2023, pp. 400-404. doi:10.18429/JACoW-IBIC2023-WEP024
[n]	M. Bai et al., “Distributed coupling linac for efficient acceleration of high charge electron bunches”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2064-2066. doi:10.18429/JACoW-IPAC2023-TUPL141
[n]	B. Urbaniec, L. Burdzanowski, and S. G. Gennaro, “Developing Modern High-Level Controls APIs”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 1145-1149. doi:10.18429/JACoW-ICALEPCS2023-TH2AO04
[n]	T. Magome, H. Tanaka, and K. Togawa, “Work function measurement by means of photoelectron yield spectroscopy using a tunable pulsed laser to investigate short lifetime of the CeB6 thermionic cathode at SACLA”, presented at the IPAC'23, Venice, Italy, May 2023, paper TUPA010, unpublished. 
[n]	S. Poddar et al., “Half-Metal Spin Filter for Highly Polarized Emission from GaAs  Photocathodes”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2833-2836. doi:10.18429/JACoW-IPAC2021-WEPAB102
[n]	D. F. G. Minenna, E. Bargel, L. Batista, and P. A. P. Nghiem, “Basic Relations of Laser-Plasma Interaction in the 3D Relativistic, Non-Linear Regime”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 2265-2267. doi:10.18429/JACoW-IPAC2022-WEPOMS015
[n]	A. Lehrach et al., “Establishing a new class of high-current accelerator-driven neutron sources with the HBS Project”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 129-132. doi:10.18429/JACoW-IPAC2024-MOPC31
[n]	N. Bazin et al., “CEA Contribution to the PIP-II Linear Accelerator”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 74-77. doi:10.18429/JACoW-IPAC2022-MOPOST011
[n]	G. Wang, V. Litvinenko, and J. Ma, “Frequency Dependence of Plasma Cascade Amplification”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2672-2674. doi:10.18429/JACoW-IPAC2021-WEPAB031
[n]	R. Monroy-Villa et al., “Status of the New Quadrupole Resonator for SRF R&D”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, pp. 751. doi:10.18429/JACoW-SRF2021-THPFDV001
[n]	J. Xu, M. Qian, and Y. Piao, “Force-neutral adjustable phase undulator”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1372-1375. doi:10.18429/JACoW-IPAC2024-TUPG55
[n]	G. Ha, “Preliminary study on THz-TBA based X-ray source”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1885-1888. doi:10.18429/JACoW-IPAC2023-TUPL057
[n]	M. Vogt and J. Zemella, “The New FLASH1 Beamline for the FLASH2020+ Project”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 1010-1013. doi:10.18429/JACoW-IPAC2022-TUPOPT006
[n]	R. Bazrafshan, M. Fakhari, K. Fl?Âttmann, F. X. Kaernter, N. H. Matlis, and T. Rohwer, “Field Enhanced, Compact S-Band Gun Employing a Pin Cathode”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 2567-2569. doi:10.18429/JACoW-IPAC2022-THPOPT005
[n]	Z. Matej et al., “Real-Time Azimuthal Integration of X-Ray Scattering Data on FPGAs”, presented at the ICALEPCS'21, Shanghai, China, Oct. 2021, paper FRBL04, unpublished. 
[n]	M. Signorelli et al., “Polarization preservation methods for the Electron Storage Ring of the EIC”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 270-273. doi:10.18429/JACoW-IPAC2024-MOPC83
[n]	S. Vrcic, “Design Patterns for the SKA Control System”, in Proc. ICALEPCS'21, Shanghai, China, Oct. 2021, pp. 343-347. doi:10.18429/JACoW-ICALEPCS2021-TUBR02
[n]	R. Jiménez Estupiñán et al., “Phase-II Upgrade of the CMS Electromagnetic Calorimeter Detector Control and Safety Systems for the High Luminosity Large Hadron Collider”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 1516-1521. doi:10.18429/JACoW-ICALEPCS2023-THPDP074
[n]	K. A. Brown et al., “Coulomb Crystals in Storage Rings for Quantum  Information Science”, in Proc. NAPAC'22, Albuquerque, NM, USA, Aug. 2022, pp. 296-301. doi:10.18429/JACoW-NAPAC2022-TUYE1
[n]	I. Lobach et al., “Machine Learning for Predicting Power Supply Trips in Storage Rings”, in Proc. NAPAC'22, Albuquerque, NM, USA, Aug. 2022, pp. 413-416. doi:10.18429/JACoW-NAPAC2022-TUPA29
[n]	F. Babagoli Moziraji, H. Afarideh, M. Dehghan, and F. Ghasemi, “Design of 71 MHz Power Amplifier  in a Single-ended Architecture for IRANCYC-10 Cyclotron”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2325-2327. doi:10.18429/JACoW-IPAC2021-TUPAB350
[n]	R. L. Parise et al., “Development of Diffusion Bonded Joints of AA6061 Aluminum Alloy to AISI 316LN Stainless Steel for Sirius Planar Undulators”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 3459-3462. doi:10.18429/JACoW-IPAC2021-WEPAB334
[n]	S. Appel, S. Hirlaender, and N. Madysa, “Data-driven model predictive control for automated optimization of injection into the SIS18 synchrotron”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1800-1803. doi:10.18429/JACoW-IPAC2024-TUPS59
[n]	P. Krejcik, T. Himel, R. H. Siemann, M. Minty, and R. Tighe, “Simulation and Analysis of RF Feedback Systems on the SLC Damping Rings”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2373-2376. 
[n]	S. P. Antipov, E. Gomez, R. Celestre, and T. Roth, “Diamond Refractive Optics Fabrication by Laser Ablation and at-Wavelength Testing”, in Proc. MEDSI'20, Chicago, USA, Jul. 2021, pp. 59. doi:10.18429/JACoW-MEDSI2020-MOPC03
[n]	P. Andreu Mu??oz et al., “Irradiation of Low-Z Carbon-Based Materials with 440 GeV/c Proton Beam for High Energy & Intensity Beam Absorbers: The CERN HiRadMat-56-HED Experiment”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 2883-2886. doi:10.18429/JACoW-IPAC2022-THPOTK049
[n]	M. Mansouri et al., “Personnel Safety Systems for ESS Beam on Dump and Beam on Target Operations”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 452-455. doi:10.18429/JACoW-ICALEPCS2023-TUMBCMO37
[n]	H. Witte et al., “Test magnet for the EIC Rapid Cycling Synchrotron”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1517-1519. doi:10.18429/JACoW-IPAC2024-TUPR45
[n]	T. Higo et al., “Fabrication Process of Rounded Damped Detuned Structure”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper TUA01, pp. 371-373. 
[n]	J. M. D, “An Overview of Radioactive Beam Concepts”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1641-1645. 
[n]	A. Gorn et al., “Optics rematching between TT24 and P42 primary beam lines within the HI-ECN3 study project at CERN”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1172-1175. doi:10.18429/JACoW-IPAC2024-TUPC71
[n]	M. P. Stockli et al., “Ramping Up the SNS Beam Current with the LBNL Baseline H- Source”, in Proc. LINAC'08, Victoria, Canada, Sep.-Oct. 2008, paper TUP119, pp. 682-684. 
[n]	A. Gobbo and A. Babic, “CamServer: Stream Processing at SwissFEL and SLS 2.0”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 1585-1589. doi:10.18429/JACoW-ICALEPCS2023-THSDSC04
[n]	A. Nagler et al., “The SARAF CW 40 MeV Proton/Deuteron Accelerator”, in Proc. LINAC'08, Victoria, Canada, Sep.-Oct. 2008, paper MO203, pp. 26-30. 
[n]	G. Riddone, K. Osterberg, and R. J. Nousiainen, “Studies on the Thermo-mechanical Behavior of the CLIC Two-beam Module”, in Proc. LINAC'10, Tsukuba, Japan, Sep. 2010, paper MOP104, pp. 304-306. 
[n]	M. Li, Y. T. Yan, M. Syphers, and P. J. Channell, “Long-Term Tracking with Symplectic Implicit One-Turn Maps”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 38-41. 
[n]	W. Cheng et al., “Beam position monitoring system and beam commissioning at APS-U storage ring”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 2170-2172. doi:10.18429/JACoW-IPAC2024-WEPG01
[n]	W. Asztalos, F. Pellemoine, P. Rath, S. Bidhar, and Y. Torun, “Bayesian optimization scheme for the design of a nanofibrous high power target”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1762-1765. doi:10.18429/JACoW-IPAC2024-TUPS45
[n]	K. Bishofberger et al., “An overview of the LAMP front-end upgrade at LANSCE”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1677-1679. doi:10.18429/JACoW-IPAC2024-TUPS18
[n]	B. Parker et al., “A Review of Progress and Future Prospects for BNL Direct Wind Superconducting Magnet Technology”, in Proc. IPAC'20, Caen, France, May 2020, paper THYYPLS02, pp. XX-XX. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search