Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] A. Bortniansky et al., “Analytical Complexes for Ion Beam Analysis and Modification of Materials in St. Petersburg and Bratislava”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper THP033G, pp. 2696-2698.
[n] A. Zholents et al., “A Compact High Repetition Rate Free-Electron Laser Based on the Advanced Wakefield Accelerator Technology”, in Proc. IPAC'20, Caen, France, May 2020, paper TUVIR08, pp. XX-XX.
[n] J. Blomgren, S. Hultqvist, O. Jonsson, N. Olsson, D. Reistad, and P.-U. Renberg, “Monoenergetic Neutron Beam Facility at TSL”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper WEP04E, pp. 2401-2403.
[n] M. Pavlovic, M. Regler, and S. A. Reimoser, “Status Report on the Riesenrad Ion Gantry Design”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP4A10, pp. 2542-2544.
[n] H. Suk et al., “Underdense Plasma Lens Experiment at the UCLA Neptune Laboratory”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper FRA139, pp. 3708-3710.
[n] M. Tomut and C. L. Hubert, “Understanding Ion Induced Radiation Damage in Target Materials”, in Proc. HB'12, Beijing, China, Sep. 2012, paper WEO3C06, pp. 476-478.
[n] M. C. Bellachioma et al., “Study of the Pressure Profile Inside the NEG Coated Chambers of the SIS 18”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPD011, pp. 2519-2521.
[n] S. H. Kim, Z. A. Conway, W. G. Jansma, M. Kedzie, M. P. Kelly, and P. N. Ostroumov, “4 K Alignment of Superconducting Quarter-Wave Cavities and 9 T Solenoids in the ATLAS Intensity Upgrade Cryomodule”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper TUPP003, pp. 443-445.
[n] A. Smolyakov, E. Mustafin, N. Pyka, and P. J. Spiller, “Radiation Damage Studies for the Slow Extraction from SIS100”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper THPP102, pp. 3602-3604.
[n] K. J. Suthar et al., “Determination of Maximum Repetition Rate of a Corrugated-Waveguide-Based Wakefield Accelerator”, in Proc. MEDSI'20, Chicago, USA, Jul. 2021, pp. 336. doi:10.18429/JACoW-MEDSI2020-THIO02
[n] Ch. Maurer, D. H. H. Hoffmann, L. H. J. Bozyk, H. Kollmus, and P. J. Spiller, “Simulation and Experimental Investigation of Heavy Ion Induced Desorption from Cryogenic Targets”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3699-3701. doi:10.18429/JACoW-IPAC2015-THPF010
[n] Z. Liu, W. G. Jansma, J. Nudell, and C. A. Preissner, “Validation of APS-U Magnet Support Design Analysis and Prediction”, in Proc. MEDSI'20, Chicago, USA, Jul. 2021, pp. 89. doi:10.18429/JACoW-MEDSI2020-MOPC16
[n] R. J. Dejus et al., “Magnetic Measurements of Storage Ring Magnets for the APS Upgrade Project”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 884-886. doi:10.18429/JACoW-NAPAC2016-WEPOB03
[n] D. J. Bromberek, W. G. Jansma, T. L. Smith, and G. J. Waldschmidt, “Mechanical Straightening of the 3-m Accelerating Structures at the Advanced Photon Source”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 1051-1053. doi:10.18429/JACoW-NAPAC2016-WEPOB70
[n] S. H. Lee et al., “Mechanical Design of a Compact Collinear Wakefield Accelerator”, in Proc. MEDSI'20, Chicago, USA, Jul. 2021, pp. 276. doi:10.18429/JACoW-MEDSI2020-WEPB05
[n] H. Eickhoff, D. Boehne, J. Debus, Th. Haberer, G. Kraft, and M. Pavlovic, “The Proposed Accelerator Facility for Light Ion Cancer Therapy in Heidelberg”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEP113, pp. 2513-2515.
[n] I. Stra?í?âk, V. Chetvertkova, E. Mustafin, and M. Pavlovic, “Beam-Loss Criteria for Heavy Ion Accelerators and Activation of Different Materials”, in Proc. HB'10, Morschach, Switzerland, Sep.-Oct. 2010, paper WEO1B04, pp. 463-467.
[n] M. Pavlovic, “Recent Development of Gantry Design Activities at GSI Darmstadt”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper THP129G, pp. 2665-2670.
[n] G. J. Waldschmidt et al., “Design and Test Plan for a Prototype Corrugated Waveguide”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1550-1552. doi:10.18429/JACoW-IPAC2018-TUPML009
[n] T. Nakagawa, Y. Higurashi, T. Nagatomo, and J. Ohnishi, “Development of Riken 28 GHz SC-ECRIS for Production of Intense Metal Ion Beam”, in Proc. ECRIS'18, Catania, Italy, Sep. 2018, pp. 44-48. doi:10.18429/JACoW-ECRIS2018-TUA1
[n] S. H. Lee et al., “Design and Fabrication Challenges of Transition Section for the CWA Module”, in Proc. MEDSI'20, Chicago, USA, Jul. 2021, pp. 273. doi:10.18429/JACoW-MEDSI2020-WEPB04
[n] E. Trakhtenberg and G. E. Wiemerslage, “A Study of the Minimum Wall Thickness for an Extruded Aluminum Vacuum Chamber”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPMN101, pp. 1151-1152.
[n] Ch. Maurer, D. H. H. Hoffmann, L. H. J. Bozyk, H. Kollmus, and P. J. Spiller, “Heavy Ion Induced Desorption Measurements on Cryogenic Targets”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 867-869. doi:10.18429/JACoW-IPAC2014-MOPRI105
[n] V. Chetvertkova, L. N. Latysheva, E. Mustafin, U. Ratzinger, N. Sobolevskiy, and I. Stra?í?âk, “Activation of Aluminium by Uranium”, in Proc. HB'10, Morschach, Switzerland, Sep.-Oct. 2010, paper MOPD65, pp. 250-253.
[n] E. Mustafin et al., “Measured Residual Radioactivity Induced by U Ions of Energy 500 MeV/u in a Cu Target”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPLS141, pp. 1834-1836.
[n] P. Bado, M. Dugan, A. A. Said, K. J. Suthar, A. Zholents, and A. E. Siy, “Fabrication of the Transition Section of a Corrugated Wakefield Accelerator via Laser Micromachining”, in Proc. MEDSI'20, Chicago, USA, Jul. 2021, pp. 175. doi:10.18429/JACoW-MEDSI2020-TUPB15
[n] M. Thuot et al., “A Transient Tolerant Automated Control System for the LEDA 75kV Injector”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WECL5, pp. 349-351.
[n] M. C. Thompson et al., “The UCLA/SLAC Ultra-High Gradient Cerenkov Wakefield Accelerator Experiment”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPAE049, pp. 3067-3069.
[n] G. O. Bolme et al., “Proton Beam Verification Using RF Power Measurement Data for a CW Radio Frequency Quadrupole Linac”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUA157, pp. 1444-1446.
[n] R. Burke and A. Burke, “RF power challenge for the linac of the U4 single pass RF driver for energy from inertial confinement fusion”, presented at the LINAC'24, Chicago, IL, USA, Aug. 2024, paper MOPB002, unpublished.
[n] A. E. Siy et al., “Design and Fabrication of a Waveguide for Conductivity Measurement of Electroplated Copper at 170GHz - 200GHz”, in Proc. MEDSI'20, Chicago, USA, Jul. 2021, paper TUPC05, pp. XX-XX.
For LaTeX
Use Complete Form
For BibTeX
References
- A. Bortniansky et al., “Analytical Complexes for Ion Beam Analysis and Modification of Materials in St. Petersburg and Bratislava”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper THP033G, pp. 2696-2698.
- A. Zholents et al., “A Compact High Repetition Rate Free-Electron Laser Based on the Advanced Wakefield Accelerator Technology”, in Proc. 11th Int. Particle Accelerator Conf. (IPAC'20), Caen, France, May 2020, paper TUVIR08, pp. XX-XX.
- J. Blomgren, S. Hultqvist, O. Jonsson, N. Olsson, D. Reistad, and P.-U. Renberg, “Monoenergetic Neutron Beam Facility at TSL”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper WEP04E, pp. 2401-2403.
- M. Pavlovic, M. Regler, and S. A. Reimoser, “Status Report on the Riesenrad Ion Gantry Design”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper WEP4A10, pp. 2542-2544.
- H. Suk et al., “Underdense Plasma Lens Experiment at the UCLA Neptune Laboratory”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper FRA139, pp. 3708-3710.
- M. Tomut and C. L. Hubert, “Understanding Ion Induced Radiation Damage in Target Materials”, in Proc. 52nd ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'12), Beijing, China, Sep. 2012, paper WEO3C06, pp. 476-478.
- M. C. Bellachioma et al., “Study of the Pressure Profile Inside the NEG Coated Chambers of the SIS 18”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper WEPPD011, pp. 2519-2521.
- S. H. Kim, Z. A. Conway, W. G. Jansma, M. Kedzie, M. P. Kelly, and P. N. Ostroumov, “4 K Alignment of Superconducting Quarter-Wave Cavities and 9 T Solenoids in the ATLAS Intensity Upgrade Cryomodule”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper TUPP003, pp. 443-445.
- A. Smolyakov, E. Mustafin, N. Pyka, and P. J. Spiller, “Radiation Damage Studies for the Slow Extraction from SIS100”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper THPP102, pp. 3602-3604.
- K. J. Suthar et al., “Determination of Maximum Repetition Rate of a Corrugated-Waveguide-Based Wakefield Accelerator”, in Proc. 11th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'20), Chicago, USA, Jul. 2021, pp. 336.
- Ch. Maurer, D. H. H. Hoffmann, L. H. J. Bozyk, H. Kollmus, and P. J. Spiller, “Simulation and Experimental Investigation of Heavy Ion Induced Desorption from Cryogenic Targets”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 3699-3701.
- Z. Liu, W. G. Jansma, J. Nudell, and C. A. Preissner, “Validation of APS-U Magnet Support Design Analysis and Prediction”, in Proc. 11th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'20), Chicago, USA, Jul. 2021, pp. 89.
- R. J. Dejus et al., “Magnetic Measurements of Storage Ring Magnets for the APS Upgrade Project”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 884-886.
- D. J. Bromberek, W. G. Jansma, T. L. Smith, and G. J. Waldschmidt, “Mechanical Straightening of the 3-m Accelerating Structures at the Advanced Photon Source”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 1051-1053.
- S. H. Lee et al., “Mechanical Design of a Compact Collinear Wakefield Accelerator”, in Proc. 11th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'20), Chicago, USA, Jul. 2021, pp. 276.
- H. Eickhoff, D. Boehne, J. Debus, Th. Haberer, G. Kraft, and M. Pavlovic, “The Proposed Accelerator Facility for Light Ion Cancer Therapy in Heidelberg”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WEP113, pp. 2513-2515.
- I. Stra?í?âk, V. Chetvertkova, E. Mustafin, and M. Pavlovic, “Beam-Loss Criteria for Heavy Ion Accelerators and Activation of Different Materials”, in Proc. 46th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'10), Morschach, Switzerland, Sep.-Oct. 2010, paper WEO1B04, pp. 463-467.
- M. Pavlovic, “Recent Development of Gantry Design Activities at GSI Darmstadt”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper THP129G, pp. 2665-2670.
- G. J. Waldschmidt et al., “Design and Test Plan for a Prototype Corrugated Waveguide”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 1550-1552.
- T. Nakagawa, Y. Higurashi, T. Nagatomo, and J. Ohnishi, “Development of Riken 28 GHz SC-ECRIS for Production of Intense Metal Ion Beam”, in Proc. 23th International Workshop on ECR Ion Sources (ECRIS'18), Catania, Italy, Sep. 2018, pp. 44-48.
- S. H. Lee et al., “Design and Fabrication Challenges of Transition Section for the CWA Module”, in Proc. 11th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'20), Chicago, USA, Jul. 2021, pp. 273.
- E. Trakhtenberg and G. E. Wiemerslage, “A Study of the Minimum Wall Thickness for an Extruded Aluminum Vacuum Chamber”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUPMN101, pp. 1151-1152.
- Ch. Maurer, D. H. H. Hoffmann, L. H. J. Bozyk, H. Kollmus, and P. J. Spiller, “Heavy Ion Induced Desorption Measurements on Cryogenic Targets”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 867-869.
- V. Chetvertkova, L. N. Latysheva, E. Mustafin, U. Ratzinger, N. Sobolevskiy, and I. Stra?í?âk, “Activation of Aluminium by Uranium”, in Proc. 46th ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'10), Morschach, Switzerland, Sep.-Oct. 2010, paper MOPD65, pp. 250-253.
- E. Mustafin et al., “Measured Residual Radioactivity Induced by U Ions of Energy 500 MeV/u in a Cu Target”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUPLS141, pp. 1834-1836.
- P. Bado, M. Dugan, A. A. Said, K. J. Suthar, A. Zholents, and A. E. Siy, “Fabrication of the Transition Section of a Corrugated Wakefield Accelerator via Laser Micromachining”, in Proc. 11th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'20), Chicago, USA, Jul. 2021, pp. 175.
- M. Thuot et al., “A Transient Tolerant Automated Control System for the LEDA 75kV Injector”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WECL5, pp. 349-351.
- M. C. Thompson et al., “The UCLA/SLAC Ultra-High Gradient Cerenkov Wakefield Accelerator Experiment”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper TPAE049, pp. 3067-3069.
- G. O. Bolme et al., “Proton Beam Verification Using RF Power Measurement Data for a CW Radio Frequency Quadrupole Linac”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper TUA157, pp. 1444-1446.
- R. Burke and A. Burke, “RF power challenge for the linac of the U4 single pass RF driver for energy from inertial confinement fusion”, presented at the 32nd Linear Accelerator Conf. (LINAC'24), Chicago, IL, USA, Aug. 2024, paper MOPB002, unpublished.
- A. E. Siy et al., “Design and Fabrication of a Waveguide for Conductivity Measurement of Electroplated Copper at 170GHz - 200GHz”, in Proc. 11th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'20), Chicago, USA, Jul. 2021, paper TUPC05, pp. XX-XX.
Back to search