Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] R. A. Bosch, M. A. Green, R. W. C. Hansen, K. D. Jacobs, R. L. Julian, and K. J. Kleman, “Throughput and Noise of the Aladdin Infrared Beamline”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper MPPB052, pp. 929-931.
[n] F. Maimone et al., “Status of the Versatile Ion Source VIS”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPC151, pp. 430-432.
[n] Y. L. Chi et al., “Progress on the Construction of the 100 MeV / 100 kW Electron Linac for the NSC KIPT Neutron Source”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPFI031, pp. 351-353.
[n] G. Amendola et al., “Design Study of the Low Energy Part of the CERN Pb Ion Injector”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 545-548.
[n] F. D. Dziuba et al., “First Cold Tests of the Superconducting cw Demonstrator at GSI”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 84-86. doi:10.18429/JACoW-RUPAC2016-WECBMH01
[n] M. K. Sullivan, “IR Design for High Luminosity and Low Backgrounds”, in Proc. eeFACT'18, Hong Kong, China, Sep. 2018, pp. 194. doi:10.18429/JACoW-eeFACT2018-WEXBA01
[n] T. Kamitani et al., “A Simulation Study on KEK Positron Generator”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper TU4-29, pp. 377-379.
[n] N. S. Sudar, J. P. Duris, and P. Musumeci, “IFEL Driven Micro-Electro-Mechanical System Free Electron Laser”, in Proc. FEL'14, Basel, Switzerland, Aug. 2014, paper TUP045, pp. 481-484.
[n] H. Maesaka, T. Ohshima, Y. Otake, and S. Matsubara, “Design and Performance of the Optical Fiber Length Stabilization System for SACLA”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1906-1908. doi:10.18429/JACoW-IPAC2014-WEOBB01
[n] P. Mandin et al., “Two Shielded End-Stations at MARS Beamline of SOLEIL Synchrotron: Specific Devices for the Highly Irradiating Materials Analysis”, in Proc. MEDSI'20, Chicago, USA, Jul. 2021, paper WEPB10, pp. XX-XX.
[n] J. Zhang, A. Chao, J. Y. Li, C. Sun, W. Wu, and Y. K. Wu, “Feasibility Study of Electron Beam Polarization Measurement Using Touschek Lifetime”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU6RFP054, pp. 1671-1673.
[n] K. Wittenburg, “Experience with the Residual Gas Ionisation Beam Profile Monitors at the DESY Proton Accelerators”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1133-1136.
[n] M. Comunian, G. V. Lamanna, and A. Pisent, “TRASCO RFQ Design”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP6B13, pp. 927-929.
[n] D. Bulfone and P. Michelini, “The ELETTRA Power Supply Control System”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1158-1161.
[n] M. K. Sullivan, “e+e- Factories”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper MOYKI01, pp. 12-16.
[n] D. Marx, R. W. Assmann, R. T. P. D, and B. Marchetti, “Simulations of 3D Charge Density Measurements for Commissioning of the PolariX-TDS”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1930-1933. doi:10.18429/JACoW-IPAC2018-WEPAF050
[n] V. Andreev, H. Ao, G. Bisoffi, and K. W. Shepard, “Design of the Fast Tuner Loop for Superconducting RFQs at INFN-LNL”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP6B10, pp. 2013-2015.
For LaTeX
Use Complete Form
For BibTeX
References
- R. A. Bosch, M. A. Green, R. W. C. Hansen, K. D. Jacobs, R. L. Julian, and K. J. Kleman, “Throughput and Noise of the Aladdin Infrared Beamline”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper MPPB052, pp. 929-931.
- F. Maimone et al., “Status of the Versatile Ion Source VIS”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPC151, pp. 430-432.
- Y. L. Chi et al., “Progress on the Construction of the 100 MeV / 100 kW Electron Linac for the NSC KIPT Neutron Source”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPFI031, pp. 351-353.
- G. Amendola et al., “Design Study of the Low Energy Part of the CERN Pb Ion Injector”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 545-548.
- F. D. Dziuba et al., “First Cold Tests of the Superconducting cw Demonstrator at GSI”, in Proc. 25th Russian Particle Accelerator Conf. (RuPAC'16), Saint Petersburg, Russia, Nov. 2016, pp. 84-86.
- M. K. Sullivan, “IR Design for High Luminosity and Low Backgrounds”, in Proc. 62nd ICFA Advanced Beam Dynamics Workshop on High Luminosity Circular e+e- Colliders (eeFACT'18), Hong Kong, China, Sep. 2018, pp. 194.
- T. Kamitani et al., “A Simulation Study on KEK Positron Generator”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper TU4-29, pp. 377-379.
- N. S. Sudar, J. P. Duris, and P. Musumeci, “IFEL Driven Micro-Electro-Mechanical System Free Electron Laser”, in Proc. 36th Int. Free Electron Laser Conf. (FEL'14), Basel, Switzerland, Aug. 2014, paper TUP045, pp. 481-484.
- H. Maesaka, T. Ohshima, Y. Otake, and S. Matsubara, “Design and Performance of the Optical Fiber Length Stabilization System for SACLA”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 1906-1908.
- P. Mandin et al., “Two Shielded End-Stations at MARS Beamline of SOLEIL Synchrotron: Specific Devices for the Highly Irradiating Materials Analysis”, in Proc. 11th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'20), Chicago, USA, Jul. 2021, paper WEPB10, pp. XX-XX.
- J. Zhang, A. Chao, J. Y. Li, C. Sun, W. Wu, and Y. K. Wu, “Feasibility Study of Electron Beam Polarization Measurement Using Touschek Lifetime”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TU6RFP054, pp. 1671-1673.
- K. Wittenburg, “Experience with the Residual Gas Ionisation Beam Profile Monitors at the DESY Proton Accelerators”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 1133-1136.
- M. Comunian, G. V. Lamanna, and A. Pisent, “TRASCO RFQ Design”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper THP6B13, pp. 927-929.
- D. Bulfone and P. Michelini, “The ELETTRA Power Supply Control System”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 1158-1161.
- M. K. Sullivan, “e+e- Factories”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper MOYKI01, pp. 12-16.
- D. Marx, R. W. Assmann, R. T. P. D, and B. Marchetti, “Simulations of 3D Charge Density Measurements for Commissioning of the PolariX-TDS”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 1930-1933.
- V. Andreev, H. Ao, G. Bisoffi, and K. W. Shepard, “Design of the Fast Tuner Loop for Superconducting RFQs at INFN-LNL”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper THP6B10, pp. 2013-2015.
Back to search