JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	H. Ishimaru, T. Momose, and H. Saeki, “Observation and Analysis for Motions of Trapped Microparticles in the TRISTAN Accumulation Ring”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 3885-3888. 
[n]	M. Bousonville, S. Choroba, and F. Eints, “Installation Management for the European XFEL Main Accelerator”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1409-1411. doi:10.18429/JACoW-IPAC2017-TUPAB039
[n]	G. Geloni, P. Ilinski, E. Saldin, E. Schneidmiller, and M. V. Yurkov, “Integration of the Optical Replica Ultrashort Electron Bunch Diagnostics with the High-Resolution Coherent Optical Transition Radiation Imager”, in Proc. FEL'09, Liverpool, UK, Aug. 2009, paper WEPC46, pp. 603-606. 
[n]	M. A. Fraser et al., “Considerations on an Upgrade Possibility of the LHC Beam Dump Kicker System”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3631-3633. doi:10.18429/JACoW-IPAC2016-THPMW035
[n]	V. Gubaidulin and A. Gamelin, “Microwave Instability Modelling for SOLEIL II”, presented at the IPAC'26, Deauville, France, May 2026, paper WEP5105, unpublished. 
[n]	M. J. Yang, A. Marchionni, and C. S. Mishra, “Lattice Function Measurements of Fermilab Recycler Ring”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper FPAB074, pp. 3440-3442. 
[n]	A. Puntambekar et al., “Development of 1.3 GHz Prototype Niobium Single Cell Superconducting Cavity Under IIFC Collaboration”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP032, pp. 871-873. 
[n]	F. J. Harden, A. Bouvard, N. Charitonidis, and Y. Kadi, “HiRadMat: A Facility Beyond the Realms of Materials Testing”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 4016-4019. doi:10.18429/JACoW-IPAC2019-THPRB085
[n]	S. Chel, M. Desmons, A. Hamdi, and F. Peauger, “New 1MW 704MHz RF Test Stand at CEA-Saclay”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPD022, pp. 490-492. 
[n]	M. Nakao et al., “Beam Simulation for Improved Operation of Cyclotron NIRS-930”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 797-799. doi:10.18429/JACoW-IPAC2014-MOPRI081
[n]	M. Miski-Oglu et al., “Preparation for Commissioning with Beam of Advanced Demonstrator" Module with Heavy Ion Beam"”, in Proc. LINAC'22, Liverpool, UK, Aug.-Sep. 2022, pp. 114-117. doi:10.18429/JACoW-LINAC2022-MOPOPA19
[n]	V. Gubaidulin, A. Gamelin, A. Loulergue, R. Nagaoka, and P. Schreiber, “Transverse instabilities in SOLEIL II storage ring in the presence of a harmonic cavity”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 821-824. doi:10.18429/JACoW-IPAC2024-MOPS45
[n]	JP. de Brion, R. Dei-Cas, and H. Leboutet, “A Magnetic Compressor for a 5 MeV Electron Beam”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 961-964. 
[n]	R. Bruce, R. Alemany-Fern?índez, H. Bartosik, M. A. Jebramcik, J. M. Jowett, and M. Schaumann, “Studies for an LHC Pilot Run with Oxygen Beams”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 53-56. doi:10.18429/JACoW-IPAC2021-MOPAB005
[n]	N. Bazin et al., “Thermo-Mechanical Simulations of the Frequency Tuning Plunger for the IFMIF Half-Wave Resonator”, in Proc. LINAC'12, Tel Aviv, Israel, Sep. 2012, paper MOPB074, pp. 351-353. 
[n]	P. Ilinski, “Optimization of NSLS-II Blade X-ray Beam Position Monitors: From Photoemission Type to Diamond Detector”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper MOPC10, pp. 67-70. 
[n]	D. Einfeld, “Performance and Perspective of Modern Synchrotron Light Sources”, in Proc. eeFACT'16, Daresbury, UK, Oct. 2016, pp. 17-24. doi:10.18429/JACoW-eeFACT2016-MOOTH4
[n]	J. Teichert et al., “Experiences with the SRF Gun II for User Operation at the ELBE Radiation Source”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4145-4147. doi:10.18429/JACoW-IPAC2018-THPMF040
[n]	A. S. Fisher et al., “Commissioning the Beam-Loss Monitoring System of the LCLS Superconducting Linac”, in Proc. IBIC'23, Saskatoon, Canada, Sep. 2023, pp. 187-190. doi:10.18429/JACoW-IBIC2023-TUP005
[n]	H. Ishimaru, G. Horikoshi, and Y. Kimura, “New All Aluminum Alloy Vacuum System for the TRISTAN ee- Storage Accelerator”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 3320-3323. 
[n]	J.-C. Chang, J.-R. Chen, M. Ke, and Z.-D. Tsai, “Air Temperature Analysis and Improvement for the Technical Zone at TLS”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPLS136, pp. 1825-1827. 
[n]	F. Zimmermann, R. W. Assmann, and A. P. Blondel, “Summary of Design Concepts”, in Proc. eeFACT'16, Daresbury, UK, Oct. 2016, pp. 195-198. doi:10.18429/JACoW-eeFACT2016-THS1H1
[n]	K. J. Bertsche, H. Loos, H.-D. Nuhn, and F. Peters, “Fast Beam-Based BPM Calibration”, in Proc. FEL'12, Nara, Japan, Aug. 2012, paper TUPD26, pp. 289-291. 
[n]	M. C. Ross, J. Frisch, H. Hayano, and D. McCormick, “RF Cavity BPM's as Beam Angle and Beam Correlation Monitors”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPPB062, pp. 2548-2550. 
[n]	A. Ferrero Colomo et al., “Feasibility Study of the Fast SPS Ion Injection Kicker System”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3607-3610. doi:10.18429/JACoW-IPAC2016-THPMW029
[n]	A. A. Aksoy, A. A. Aydin, C. Kaya, B. Ketenoglu, and O. Yavas, “TARLA: The First Facility of Turkish Accelerator Center (TAC)”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2776-2778. doi:10.18429/JACoW-IPAC2017-WEPAB087
[n]	N. Okuda and K. Yokoya, “Impedance Estimation by Parabolic Partial Differential Equation for Rectangular Taper”, in Proc. ICAP'09, San Francisco, CA, USA, Aug.-Sep. 2009, paper MO3IODN01, pp. 27-29. 
[n]	E. A. Butenko, A. Y. Boytsov, and E. E. Donets, “Problems of Measuring the Beam Emittance on the ESIS KRION-6T and Analisys of Possible Solutions”, presented at the RuPAC2021, Alushta, Crimea, Sep.-Oct. 2021, paper WEPSC41, unpublished. 
[n]	T. Henderson et al., “Design of the PEP-II Low-Energy Ring Arc Magnets”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper FAP01, pp. 1322-1324. 
[n]	R. Pan, T. Lefevre, W. A. Gillespie, and S. P. Jamison, “Synchronization Scheme a Bunch Profile Monitor Based on Electro-Optic Spectral Decoding”, in Proc. BIW'12, Newport News, VA, USA, Apr. 2012, paper MOPG034, pp. 104-106. 
[n]	P. N. Lu et al., “Simulation of the ELBE SRF Gun II”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 636-638. doi:10.18429/JACoW-IPAC2014-MOPRI023
[n]	H. Bartosik, A. Oeftiger, M. Schenk, F. Schmidt, and M. Titze, “Improved Methods for the Measurement and Simulation of the CERN SPS Non-linear Optics”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3464-3467. doi:10.18429/JACoW-IPAC2016-THPMR036
[n]	M. Zhang, R. B. Deng, D. Gu, Q. Gu, D. Huang, and Z. Wang, “Beam Stability Modeling and Jitter Control for SXFEL Linac”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1513-1516. doi:10.18429/JACoW-IPAC2017-TUPAB084
[n]	B. Lorbeer, H. T. Duhme, I. Krouptchenkov, T. Lensch, D. Lipka, and M. Werner, “First Test with MicroTCA Based Cavity BPM Electronics for the European XFEL and FLASH”, in Proc. IBIC'23, Saskatoon, Canada, Sep. 2023, pp. 70-73. doi:10.18429/JACoW-IBIC2023-MOP019
[n]	C. Madec et al., “The ESS Elliptical Cavity Cryomodules Production at CEA”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2536-2539. doi:10.18429/JACoW-IPAC2021-WEXB01
[n]	D. Mascali et al., “Ecr Ion Sources Developments at INFN-LNS for the Production of High Brightness Highly Charged Ion Beams”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper MOPP086, pp. 254-256. 
[n]	J. Randhahn et al., “Design and Operation of a Ferrite Loaded Kicker Cavity for the Longitudinal Coupled Bunch Feedback for HERA-p”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPCH087, pp. 2991-2993. 
[n]	C. Z. Antoine, S. Berry, and H. Shou, “Hydrogen Surface Analysis of Niobium in Function of Various Electrochemical Conditions”, in Proc. SRF'03, Lübeck, Germany, Sep. 2003, paper THP05, pp. 596-598. 
[n]	H. M??ller et al., “Design, Production, and Testing of Superconducting Magnets for the Super-FRS”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 4128-4131. doi:10.18429/JACoW-IPAC2019-THPTS011
[n]	S. R. Koscielniak, “Minimum Cost Lattices for Nonscaling FFAGs”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPLS071, pp. 1660-1662. 
[n]	S. Sultansoy, O. Cakir, A. K. Ciftci, E. Recepoglu, and O. Yavas, “Main Parameters of ILC-Tevatron Based Lepton-Hadron and Photon-Hadron Colliders”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper TPAT099, pp. 4335-4337. 
[n]	S. M. Liuzzo, M. E. Biagini, M. H. Donald, and P. Raimondi, “Low Emittance Tuning Studies for SuperB”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPEB007, pp. 1530-1532. 
[n]	B. Qin et al., “Design and Development of the Beamline System for a Proton Therapy Facility”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3488-3490. doi:10.18429/JACoW-IPAC2019-THPMP017
[n]	J. N. Corlett et al., “High-Gradient Normal-Conducting RF Structures for Muon Cooling Channels”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper ROAA009, pp. 500-502. 
[n]	C. H. Wang, J. Zhao, J. Liu, and S. Huang, “A Prototype of the Power Supply Control System in BEPCII”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper TU616, pp. XX-XX. 
[n]	S. V. Plotnikov et al., “First Section of a 352 MHz Prototype Alvarez DTL Tank for the CERN SPL”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUPLS055, pp. 1621-1623. 
[n]	Z. Huang, N. Balakrishnan, J. D. Bong, M. L. Campell, and T. C. Thayer, “Fast Wire Scanner Motion Control Software Upgrade For LCLS-II”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 869-872. doi:10.18429/JACoW-ICALEPCS2023-TUPDP122
[n]	R. Xiang, A. Arnold, P. N. Lu, P. Murcek, J. Teichert, and H. Vennekate, “Study of Magnesium Photocathodes for Superconducting RF Photoinjectors”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4142-4144. doi:10.18429/JACoW-IPAC2018-THPMF039
[n]	J. Guo, F. Lin, R. A. Rimmer, H. Wang, S. Wang, and Y. Zhang, “Conceptual MEIC Electron Ring Injection Scheme using CEBAF as a Full Energy Injector”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2232-2235. doi:10.18429/JACoW-IPAC2015-TUPTY083
[n]	J. F. Patrick, “A Messaging-Based Data Access Layer for Client Applications”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOPPC149, pp. 460-461. 
[n]	S. Sultansoy, O. Cakir, A. K. Ciftci, E. Recepoglu, O. Yavas, and M. Yilmaz, “The Status of Turkic Accelerator Complex Proposal”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper WOAB005, pp. 449-451. 
[n]	W. Wittmer et al., “Polarized Beams in the SuperB High Energy Ring”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE6PFP054, pp. 2619-2621. 
[n]	Y. C. Jing and V. Litvinenko, “Design of a Bunch Compressor with CSR Suppression to Achieve Hundreds of kA Peak Current”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 382-385. doi:10.18429/JACoW-IPAC2019-MOPGW112
[n]	X. Lu et al., “Rapid Radio-Frequency Beam Energy Modulator for Proton Therapy”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 298-300. doi:10.18429/JACoW-NAPAC2019-TUXBA4
[n]	V. E. Scarpine, B. J. Fellenz, A. Semenov, and D. Slimmer, “A Schottky Tune Meter for the Fermilab Mu2E Delivery Ring”, in Proc. IBIC'23, Saskatoon, Canada, Sep. 2023, pp. 425-427. doi:10.18429/JACoW-IBIC2023-WEP033
[n]	E. J. Montgomery et al., “Nanostructured Photocathodes for Spin-Polarized Electron Beams”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 196-198. doi:10.18429/JACoW-NAPAC2019-MOPLH11
[n]	H. Kim, H. Studholme, S. Banerjee, L. Bobb, W. Heath, and I. Kempf, “Fast orbit feedback using the GSVD for systems with multiple slow corrector arrays”, in Proc. ICALEPCS'25, Chicago, IL, USA, Sep. 2025, pp. 1404-1411. doi:10.18429/JACoW-ICALEPCS2025-THCG001
[n]	R. Ichimiya, K. Furukawa, F. Miyahara, M. Satoh, and T. Suwada, “High Position Resolution and High Dynamic Range Stripline Beam Position Monitor (BPM) Readout System for the KEKB Injector Linac Towards the SuperKEKB”, in Proc. IBIC'14, Monterey, CA, USA, Sep. 2014, paper WEPD04, pp. 637-641. 
[n]	C. Valerio-Lizárraga et al., “Preliminary results on the electron cloud build-up in the booster of the FCC-ee”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper WEPS053, unpublished. 
[n]	S. A. Nikitin, “Adiabatic Theory of Slow Extraction of Particles from a Synchrotron”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPCH086, pp. 2119-2121. 
[n]	L. Serafini, A. Bacci, M. Ferrario, C. Maroli, V. Petrillo, and A. R. Rossi, “Parametric Optimization of a X-Ray FEL Based on a Thomson Source”, in Proc. FEL'06, Berlin, Germany, Aug.-Sep. 2006, paper THAAU06, pp. 517-520. 
[n]	P. H. Yang, Z. H. Bai, J. J. Tan, L. Wang, and J. H. Xu, “Comparison of Optimization Methods for Hybrid Seven-Bend-Achromat Lattice Design”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 1532-1534. doi:10.18429/JACoW-IPAC2019-TUPGW055
[n]	W. Gai, C. Jing, R. Konecny, W. Liu, and J. G. Power, “New RF Design for 11.4GHz Dielectric Loaded Accelerator”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPPG001, pp. 1810-1812. 
[n]	G. P. Di Giovanni et al., “Comparison of Different Transverse Emittance Measurement Techniques in the Proton Synchrotron Booster”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 232-235. doi:10.18429/JACoW-IPAC2018-MOPMF054
[n]	Y. I. Ida et al., “Development of a Vertical Electropolishing Facility for Nb 9-Cell Cavity”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3699-3701. doi:10.18429/JACoW-IPAC2018-THPAL031
[n]	A. Sulc et al., “Towards unlocking insights from logbooks using AI”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3579-3582. doi:10.18429/JACoW-IPAC2024-THPR37

For LaTeX

Use Complete Form

For BibTeX

References

Back to search