Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] W. Joho, M. Olivo, T. Stammbach, and H. Willax, “The SIN Accelerators, Operational Experience, and Improvement Programs”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1618-1622.
[n] A. Santamar?¡a Garc?¡a et al., “Machine Protection from Fast Crab Cavity Failures in the High Luminosity LHC”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 1485-1488. doi:10.18429/JACoW-IPAC2016-TUPMW025
[n] C. Yao, N. P. Di Monte, W. E. Norum, V. Sajaev, and H. Shang, “Commissioning of the Bunch-to-Bunch Feedback System at the Advanced Photon Source”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TH6REP065, pp. 4102-4104.
[n] V. Sharma, S. Acharya, and K. C. Mittal, “Distributed Control System for an Industrial Electron Accelerator”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper THP049, pp. XX-XX.
[n] F. Filippi et al., “Gas-filled Capillaries for Plasma-Based Accelerators”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1731-1733. doi:10.18429/JACoW-IPAC2017-TUPIK023
[n] G. M. Arbique, L. F. Birney, A. D. Davidson, J. Y. Sheikh, T. Taylor, and J. S. C. Wills, “Commissioning of the RFQI Injector”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1558-1561.
[n] R. Huhmann et al., “The FAIR Control System - System Architecture and First Implementations”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOPPC097, pp. 328-331.
[n] J. F. Bridges, “Modifications to the Fermilab Booster-Main Ring Beam Transfer Phase Lock Circuit”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3337-3340.
[n] L. Zytniak et al., “GeoSynoptic Panel”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUPPC112, pp. 840-843.
[n] D. J. Armistead, D. L. Bolton, and M. G. Mazarakis, “Mechanical and Magnetic Alignment Techniques for the RADLAC-II Linear Accelerator”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 942-945.
[n] L. R. Williams et al., “Design of the High Beta Cryomodule for the HIE-ISOLDE Upgrade at CERN”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPC105, pp. 319-321.
[n] S. Chabert, T. T. Luong, and M. Prom?®, “Beam Dynamics in Separate-Sector Cyclotrons”, in Proc. Cyclotrons'75, Zurich, Switzerland, Aug. 1975, paper D-07, pp. 245-248.
[n] G. Ingold et al., “Sub-Picosecond Optical Pulses at the SLS Storage Ring”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPPH085, pp. 2656-2658.
[n] A. Marqueta Barbero et al., “The Control Architecture of Large Scientific Facilities: ITER and LHC lessons for IFMIF”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOPPC101, pp. 344-347.
[n] A. N. Otis and R. Damm, “Drift Tube Quadrupoles”, in Proc. PAC'67, Washington D.C., USA, Mar. 1967, pp. 420-425.
[n] T. J. Zhang, B. Q. Cui, Z. G. Li, Y. L. Lu, C. H. Peng, and F. Yang, “The Construction Progress of Beijing Radioactive Ion-beam Facility”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPFI029, pp. 345-347.
[n] M. C. Scott, S. Green, G. C. Taylor, and A. de Aro, “Elemental Synthesis of Real Tissue Microdosimetric Responses to High Energy Neutrons: Principles and Limitations”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1799-1802.
[n] S. Kozub et al., “Production of Superconducting Magnets and Cryogenic Systems at IHEP”, in Proc. RuPAC'12, Saint Petersburg, Russia, Sep. 2012, paper THAOR02, pp. 146-148.
[n] R. Fabris and P. Tosolini, “The Injection and Extraction Kicker Circuits for the Elettra Booster”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper TUPD006, pp. 1443-1445.
[n] J. Bosser et al., “Recent Lead Ion Storage Tests on LEAR”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 8B008, pp. 944-946.
[n] R. Petrocelli, D. Alloza, S. Blanch-Torn?â, and O. Matilla, “Upgrade of Control System of ALBA Main Booster Power Supplies”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1374-1376. doi:10.18429/JACoW-ICALEPCS2017-THPHA018
[n] H. F. Ouyang et al., “A High-Duty Factor Radio-Frequency Quadrupole Accelerator for ADS Study in China”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE4PBC03, pp. 1955-1957.
[n] G. Kube et al., “PETRA III Diagnostics Beamline for Emittance Measurements”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPD089, pp. 909-911.
[n] M. S. Prokop, S. Kwon, S. Ruggles, and P. A. Torrez, “LANSCE-R Low Level RF Control System”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEPMS025, pp. 2388-2390.
[n] S. Kozub et al., “Development and Production of Superconducting and Cryogenic Equipment and Systems for Accelerators by IHEP”, in Proc. RuPAC'10, Protvino, Russia, Sep.-Oct. 2010, paper THCHC01, pp. 295-299.
[n] R. Singh et al., “Understanding the Tune Spectrum of High Intensity Beams”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper THAL1, pp. 914-920.
[n] M. van Rooij et al., “The Vacuum Upgrade of the CERN PS and PS Booster”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPP15, pp. 2069-2071.
[n] K. Low, S. Acharya, M. Allen, E. Faught, D. Haenni, and C. Kalbfleisch, “Overview of Real-Time Kernels at the Superconducting Super Collider Laboratory”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1308-1311.
[n] M. Kreider, “The FAIR Timing Master: A Discussion of Performance Requirements and Architectures for a High-precision Timing System”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper THCHMUST06, pp. 1256-1259.
[n] H. A. Koivisto et al., “HIISI, New 18 GHz ECRIS for the JYFL Accelerator Laboratory”, in Proc. ECRIS'14, Nizhny Novgorod, Russia, Aug. 2014, paper TUOMMH05, pp. 99-103.
[n] E. M. Laziev, B. Grigoryan, V. M. Tsakanov, M. Movsisyan, and D. L. Oganesyan, “Autocorrelation Function and Power Spectrum of a Train of Quasiperiodic Sequence of Pulses”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPC144, pp. 415-417.
[n] V. Juvan, I. Dolin, T. Humar, M. Pavleski, and P. P. Goryl, “A Structured Approach to Control System GUI Design for the Solaris Light Source”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 1044-1046. doi:10.18429/JACoW-ICALEPCS2015-WEPGF145
[n] S. Chandran, N. Kumar, B. Rienäcker, B. Rawat, and C. Welsch, “Simulation and feasibility analysis of a non-invasive cavity bunch charge monitor for low-energy antiproton beams”, in Proc. IBIC'25, Liverpool, UK, Sep. 2025, pp. 93-97. doi:10.18429/JACoW-IBIC2025-MOPCO13
[n] J. L. Conradie, J. C. Cornell, and D. T. Fourie, “Transfer Beamlines for ECR and Polarized-Ion Sources for a New Injector Cyclotron at NAC”, in Proc. Cyclotrons'89, Berlin, Germany, May 1989, paper F7-01, pp. 376-379.
[n] B. Kuiper, “Controls for the LEP Preinjector, The CERN PS Controls Group”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2044-2047.
[n] V. G. Khachatryan, W. Decking, V. V. Sahakyan, A. Tarloyan, and V. M. Tsakanov, “Optimization of the Focusing Lattice for European XFEL”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper MOPC014, pp. 97-99.
[n] C. Jamet et al., “THI Safety System”, in Proc. DIPAC'05, Lyon, France, Jun. 2005, paper POT011, pp. XX-XX.
[n] A. Xiao and M. Borland, “Intra-Beam and Touschek Scattering Computations for Beam with Non-Gaussian Longitudinal Distributions”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 559-561. doi:10.18429/JACoW-IPAC2015-MOPMA012
[n] D. J. MacNair, M. A. Kemp, K. J. P. Macken, M. N. Nguyen, and J. J. Olsen, “SLAC P2 MARX Control System and Regulation Scheme”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP196, pp. 1193-1195.
[n] J. Pflueger et al., “Status of the Undulator Systems for the European X-ray Free Electron Laser”, in Proc. FEL'13, New York, NY, USA, Aug. 2013, paper TUPSO60, pp. 367-371.
[n] G. Dudnikova et al., “Optimization of Laser Radiation Pressure Accelerator for Ion Generation”, in Proc. RuPAC'12, Saint Petersburg, Russia, Sep. 2012, paper MOPPA012, pp. 269-271.
[n] J.-L. Revol et al., “Highlights of Accelerator Activities in France on Behalf of the Accelerator Division of the French Physics Society”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 470-473. doi:10.18429/JACoW-IPAC2018-MOPML031
[n] W. B. Herrmannsfeldt, H. A. Hogg, G. A. Loew, and R. B. Neal, “Feasibility Study of a Two-Mile Superconducting Linac”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 1004-1009.
[n] P. J. Viccaro, D. W. Carnegie, and R. Savoy, “Magnetic Field Tolerances for Insertion Devices on Third Generation Sychrotron Light Sources”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 1091-1096.
[n] K. N. Sjobak, E. Adli, and A. Grudiev, “Surface Field Optimization of Accelerating Structures for CLIC using ACE3P on Remote Computing Facility”, in Proc. IPAC'13, Shanghai, China, May 2013, paper MOPWO011, pp. 909-911.
[n] M. J. Barnes et al., “Operational Experience of the Upgraded LHC Injection Kicker Magnets”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3623-3626. doi:10.18429/JACoW-IPAC2016-THPMW033
[n] A. Gotz, J. M. Chaize, and A. Delorme, “TANGO Steps Toward Industry”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper MOPPC078, pp. 277-280.
For LaTeX
Use Complete Form
For BibTeX
References
- W. Joho, M. Olivo, T. Stammbach, and H. Willax, “The SIN Accelerators, Operational Experience, and Improvement Programs”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1618-1622.
- A. Santamar?¡a Garc?¡a et al., “Machine Protection from Fast Crab Cavity Failures in the High Luminosity LHC”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 1485-1488.
- C. Yao, N. P. Di Monte, W. E. Norum, V. Sajaev, and H. Shang, “Commissioning of the Bunch-to-Bunch Feedback System at the Advanced Photon Source”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper TH6REP065, pp. 4102-4104.
- V. Sharma, S. Acharya, and K. C. Mittal, “Distributed Control System for an Industrial Electron Accelerator”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper THP049, pp. XX-XX.
- F. Filippi et al., “Gas-filled Capillaries for Plasma-Based Accelerators”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1731-1733.
- G. M. Arbique, L. F. Birney, A. D. Davidson, J. Y. Sheikh, T. Taylor, and J. S. C. Wills, “Commissioning of the RFQI Injector”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1558-1561.
- R. Huhmann et al., “The FAIR Control System - System Architecture and First Implementations”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper MOPPC097, pp. 328-331.
- J. F. Bridges, “Modifications to the Fermilab Booster-Main Ring Beam Transfer Phase Lock Circuit”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3337-3340.
- L. Zytniak et al., “GeoSynoptic Panel”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper TUPPC112, pp. 840-843.
- D. J. Armistead, D. L. Bolton, and M. G. Mazarakis, “Mechanical and Magnetic Alignment Techniques for the RADLAC-II Linear Accelerator”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 942-945.
- L. R. Williams et al., “Design of the High Beta Cryomodule for the HIE-ISOLDE Upgrade at CERN”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper MOPC105, pp. 319-321.
- S. Chabert, T. T. Luong, and M. Prom?®, “Beam Dynamics in Separate-Sector Cyclotrons”, in Proc. 7th Int. Cyclotron Conf. (Cyclotrons'75), Zurich, Switzerland, Aug. 1975, paper D-07, pp. 245-248.
- G. Ingold et al., “Sub-Picosecond Optical Pulses at the SLS Storage Ring”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPPH085, pp. 2656-2658.
- A. Marqueta Barbero et al., “The Control Architecture of Large Scientific Facilities: ITER and LHC lessons for IFMIF”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper MOPPC101, pp. 344-347.
- A. N. Otis and R. Damm, “Drift Tube Quadrupoles”, in Proc. 2nd Particle Accelerator Conf. (PAC'67), Washington D.C., USA, Mar. 1967, pp. 420-425.
- T. J. Zhang, B. Q. Cui, Z. G. Li, Y. L. Lu, C. H. Peng, and F. Yang, “The Construction Progress of Beijing Radioactive Ion-beam Facility”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPFI029, pp. 345-347.
- M. C. Scott, S. Green, G. C. Taylor, and A. de Aro, “Elemental Synthesis of Real Tissue Microdosimetric Responses to High Energy Neutrons: Principles and Limitations”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1799-1802.
- S. Kozub et al., “Production of Superconducting Magnets and Cryogenic Systems at IHEP”, in Proc. 23rd Russian Particle Accelerator Conf. (RuPAC'12), Saint Petersburg, Russia, Sep. 2012, paper THAOR02, pp. 146-148.
- R. Fabris and P. Tosolini, “The Injection and Extraction Kicker Circuits for the Elettra Booster”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper TUPD006, pp. 1443-1445.
- J. Bosser et al., “Recent Lead Ion Storage Tests on LEAR”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 8B008, pp. 944-946.
- R. Petrocelli, D. Alloza, S. Blanch-Torn?â, and O. Matilla, “Upgrade of Control System of ALBA Main Booster Power Supplies”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1374-1376.
- H. F. Ouyang et al., “A High-Duty Factor Radio-Frequency Quadrupole Accelerator for ADS Study in China”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE4PBC03, pp. 1955-1957.
- G. Kube et al., “PETRA III Diagnostics Beamline for Emittance Measurements”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPD089, pp. 909-911.
- M. S. Prokop, S. Kwon, S. Ruggles, and P. A. Torrez, “LANSCE-R Low Level RF Control System”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper WEPMS025, pp. 2388-2390.
- S. Kozub et al., “Development and Production of Superconducting and Cryogenic Equipment and Systems for Accelerators by IHEP”, in Proc. 22nd Russian Particle Accelerator Conf. (RuPAC'10), Protvino, Russia, Sep.-Oct. 2010, paper THCHC01, pp. 295-299.
- R. Singh et al., “Understanding the Tune Spectrum of High Intensity Beams”, in Proc. 2nd Int. Beam Instrumentation Conf. (IBIC'13), Oxford, UK, Sep. 2013, paper THAL1, pp. 914-920.
- M. van Rooij et al., “The Vacuum Upgrade of the CERN PS and PS Booster”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper MPP15, pp. 2069-2071.
- K. Low, S. Acharya, M. Allen, E. Faught, D. Haenni, and C. Kalbfleisch, “Overview of Real-Time Kernels at the Superconducting Super Collider Laboratory”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1308-1311.
- M. Kreider, “The FAIR Timing Master: A Discussion of Performance Requirements and Architectures for a High-precision Timing System”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper THCHMUST06, pp. 1256-1259.
- H. A. Koivisto et al., “HIISI, New 18 GHz ECRIS for the JYFL Accelerator Laboratory”, in Proc. 21st Int. Workshop on ECR Ion Sources (ECRIS'14), Nizhny Novgorod, Russia, Aug. 2014, paper TUOMMH05, pp. 99-103.
- E. M. Laziev, B. Grigoryan, V. M. Tsakanov, M. Movsisyan, and D. L. Oganesyan, “Autocorrelation Function and Power Spectrum of a Train of Quasiperiodic Sequence of Pulses”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper MOPC144, pp. 415-417.
- V. Juvan, I. Dolin, T. Humar, M. Pavleski, and P. P. Goryl, “A Structured Approach to Control System GUI Design for the Solaris Light Source”, in Proc. 15th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'15), Melbourne, Australia, Oct. 2015, pp. 1044-1046.
- S. Chandran, N. Kumar, B. Rienäcker, B. Rawat, and C. Welsch, “Simulation and feasibility analysis of a non-invasive cavity bunch charge monitor for low-energy antiproton beams”, in Proc. 14th International Beam Instrumentation Conference (IBIC'25), Liverpool, UK, Sep. 2025, pp. 93-97.
- J. L. Conradie, J. C. Cornell, and D. T. Fourie, “Transfer Beamlines for ECR and Polarized-Ion Sources for a New Injector Cyclotron at NAC”, in Proc. 12th Int. Cyclotron Conf. and Their Applications (Cyclotrons'89), Berlin, Germany, May 1989, paper F7-01, pp. 376-379.
- B. Kuiper, “Controls for the LEP Preinjector, The CERN PS Controls Group”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2044-2047.
- V. G. Khachatryan, W. Decking, V. V. Sahakyan, A. Tarloyan, and V. M. Tsakanov, “Optimization of the Focusing Lattice for European XFEL”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper MOPC014, pp. 97-99.
- C. Jamet et al., “THI Safety System”, in Proc. 7th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'05), Lyon, France, Jun. 2005, paper POT011, pp. XX-XX.
- A. Xiao and M. Borland, “Intra-Beam and Touschek Scattering Computations for Beam with Non-Gaussian Longitudinal Distributions”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 559-561.
- D. J. MacNair, M. A. Kemp, K. J. P. Macken, M. N. Nguyen, and J. J. Olsen, “SLAC P2 MARX Control System and Regulation Scheme”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper TUP196, pp. 1193-1195.
- J. Pflueger et al., “Status of the Undulator Systems for the European X-ray Free Electron Laser”, in Proc. 35th Int. Free Electron Laser Conf. (FEL'13), New York, NY, USA, Aug. 2013, paper TUPSO60, pp. 367-371.
- G. Dudnikova et al., “Optimization of Laser Radiation Pressure Accelerator for Ion Generation”, in Proc. 23rd Russian Particle Accelerator Conf. (RuPAC'12), Saint Petersburg, Russia, Sep. 2012, paper MOPPA012, pp. 269-271.
- J.-L. Revol et al., “Highlights of Accelerator Activities in France on Behalf of the Accelerator Division of the French Physics Society”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 470-473.
- W. B. Herrmannsfeldt, H. A. Hogg, G. A. Loew, and R. B. Neal, “Feasibility Study of a Two-Mile Superconducting Linac”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 1004-1009.
- P. J. Viccaro, D. W. Carnegie, and R. Savoy, “Magnetic Field Tolerances for Insertion Devices on Third Generation Sychrotron Light Sources”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 1091-1096.
- K. N. Sjobak, E. Adli, and A. Grudiev, “Surface Field Optimization of Accelerating Structures for CLIC using ACE3P on Remote Computing Facility”, in Proc. 4th Int. Particle Accelerator Conf. (IPAC'13), Shanghai, China, May 2013, paper MOPWO011, pp. 909-911.
- M. J. Barnes et al., “Operational Experience of the Upgraded LHC Injection Kicker Magnets”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3623-3626.
- A. Gotz, J. M. Chaize, and A. Delorme, “TANGO Steps Toward Industry”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper MOPPC078, pp. 277-280.
Back to search