Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] A. Murokh et al., “Photon Beam Diagnostics for VISA FEL-”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEP94, pp. 2480-2482.
[n] S. A. Kahn, M. A. Cummings, E. Z. Barzi, D. Turrioni, S. Falletta, and A. Kikuchi, “Nb3Sn Thin Films for the Production of Higher Gradient SRF Cavities at Reduced Cost”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3716-3719. doi:10.18429/JACoW-IPAC2018-THPAL036
[n] R. Althaus et al., “Performance of Dipole Magnets in Helium II”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 3280-3283.
[n] M. Puglisi and A. Wrulich, “Progress with ELETTRA, the Synchrotron Light Source in Trieste”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2634-2637.
[n] K. N. Leung, D. A. Bachman, and D. S. McDonald, “RF Driven Multicusp Ion Source for Particle Accelerator Applications”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1038-1041.
[n] D. Stout et al., “Systems Engineering and Integration on the FRIB Project”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper MOPMA08, pp. 312-314.
[n] X. J. Wang, I. Ben-Zvi, J. Sheehan, and V. Yakimenko, “Brookhaven Accelerator Test Facility Energy Upgrade”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper FRA50, pp. 3495-3497.
[n] D. K. Olsen et al., “HISTRAP Prototype Hardware Studies”, in Proc. Cyclotrons'89, Berlin, Germany, May 1989, paper C-04, pp. 70-75.
[n] T. Lavine, R. Miller, P. Morton, and R. Ruth, “Transient Analysis of Multicavity Klystrons”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper TH3-25, pp. 589-591.
[n] S. Ferry, C. Bontoiu, P. Craievich, S. Di Mitri, and E. Karantzoulis, “FERMI@elettra Collimators”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE6RFP043, pp. 2890-2892.
[n] D. A. Goldberg, G. R. Lambertson, L. Shalz, and F. Voelker, “Measurement of Frequency Response of LBL Stochastic Cooling Arrays for TeV-1 Storage Rings”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 2168-2171.
[n] D. Kumar, G. G. Ga, M. Plesko, R. Huhmann, and S. Krepp, “Implementation of the Distributed Alarm System for the Particle Accelerator FAIR Using an Actor Concurrent Programming Model and the Concept of an Agent”, in Proc. PCaPAC'14, Karlsruhe, Germany, Oct. 2014, paper WPO029, pp. 102-104.
[n] A. Galat?â et al., “ADIGE: The Radioactive Ion Beam Injector of the SPES Project”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2281-2283. doi:10.18429/JACoW-IPAC2017-TUPVA087
[n] W. V. Hassenzahl, E. Hoyer, and R. Savoy, “Design and Test of a Model Pole for the ALS U5.0 Undulator”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2736-2739.
[n] W. Hassenzahl, “A Comparison of the Costs of Superconducting Accelerator Dipoles Using NbTi, NB 3Sn and NbTiTa”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 3277-3280.
[n] P. Darriulat, “Superconducting Niobium Films for RF Cavities”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper THX01B, pp. 179-183.
[n] R. B. Palmer et al., “High-Energy High-Luminosity μ+ μ- Collider Design”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MXG03, pp. 53-57.
[n] O. Piquet et al., “SARAF Equipped Cavity Test Stand (ECTS) at CEA”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 852-854. doi:10.18429/JACoW-IPAC2019-MOPTS007
[n] F. Di Maio et al., “Development of the ITER CODAC Core Systems”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper MOC005, pp. 22-24.
[n] V. S. Morozov et al., “Spin-Manipulating Polarized Deuterons”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUOCN2, pp. 747-751.
[n] T. Itahashi, Y. Fujita, T. Fukuda, T. Shimoda, T. Yamagata, and Y. Nagame, “Mass Spectrometry of 41Ca with RCNP AVF Cyclotron”, in Proc. Cyclotrons'86, Tokyo, Japan, Oct. 1986, paper K-19, pp. 664-666.
[n] S. Kwon et al., “FPGA Implementation of a Control System for the LANSCE Accelerator”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2771-2773. doi:10.18429/JACoW-IPAC2016-WEPOR044
[n] A. D. McInturff, P. F. Dahl, R. Damm, K. E. Robins, and W. B. Sampson, “Prototype and Proposed ISABELLE" Dipoles"”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1242-1245.
[n] O. Karamyshev, G. A. Karamysheva, A. I. Papash, M. R. F. Siggel-King, and C. P. Welsch, “Design of an Antiproton Injection and Matching Beam Line for the AD Recycler Ring”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPC009, pp. 2019-2021.
[n] A. D. McInturff et al., “The Fermilab Collider DOslash Low /beta System”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1264-1267.
[n] D. Wang, J. Liu, and X. L. Wang, “Research on Fault Diagnosis of Power Supply Control System on BEPCII”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 361-364. doi:10.18429/JACoW-ICALEPCS2017-TUPHA001
[n] J. Aron et al., “Status of the Argonne Superconducting-Linac Heavy-Ion Booster”, in Proc. LINAC'81, Santa Fe, NM, USA, Oct. 1981, paper A203, pp. 25-28.
[n] R. M. Zwaska et al., “Status of the NuMI Neutrino Beam at Fermilab”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUOAKI01, pp. 691-691.
[n] J. E. Katuin, J. C. Collins, C. Hagen, W. Manwaring, and P. Zolnierczuk, “Design of a Treatment Control System for a Proton Therapy Facility”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper TUOAFI02, pp. 958-960.
[n] Y. I. Ida et al., “Development of Vertical Electropolishing Facility for Nb 9-Cell Cavity (3)”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 470-471. doi:10.18429/JACoW-SRF2019-TUP028
[n] G. Carcassi and K. Shroff, “Graphene: A Java Library for Real-Time Scientific Graphs”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUPPC133, pp. 901-902.
[n] R. Nawrocky et al., “An Active Interlock System for the NSLS X-Ray Ring Insertion Devices”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 2790-2793.
[n] B. Riemann, B. D. Isbarn, S. Khan, S. Koetter, and T. Weis, “Validating the COBEA Algorithm at the DELTA Storage Ring”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4851-4854. doi:10.18429/JACoW-IPAC2018-THPML084
[n] W. Weng, “Performances of BNL High-Intensity Synchrotrons”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 5A005, pp. 329-336.
[n] D. Dohan, G. Carcassi, and L. R. Dalesio, “High Availability On-Line Relational Databases for Accelerator Control and Operation”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR5REP001, pp. 4770-4772.
[n] A. Scheinker et al., “Preliminary Study of Advanced LLRF Controls at LANSCE for Beam Loading Compensation in the MaRIE X-FEL”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 411-413. doi:10.18429/JACoW-NAPAC2016-TUPOA63
[n] D. L. Judd, “The Fluttering, Spiralling Flight of Cyclotron Evolution”, in Proc. Cyclotrons'66, Gatlinburg, TN, USA, Aug. 1966, paper O-002, pp. XX-XX.
[n] Yu. S. Fedotov, E. A. Myae, A. A. Asseev, and S. V. Sokolov, “Increase a Bent Crystal Extraction Efficiency by Means of Thin Internal Target”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 318-320.
[n] K. Volk et al., “A Compact High Brilliance Ion Soruce for RFQ Injection”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1438-1441.
[n] M. Puglisi, “Status of the Synchrotron Light Source ELETTRA”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 478-481.
[n] K. N. Leung, D. A. Bachman, D. S. McDonald, and A. T. Young, “Ion Sources for Cyclotron Application”, in Proc. Cyclotrons'92, Vancouver, Canada, Jul. 1992, paper VIII-03, pp. 312-315.
[n] G. G. Denisov et al., “Development of Millimeter-Wave FEM for Electron-Positron Colliders”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP04K, pp. 1915-1917.
[n] K. Wang, S. Jin, Z. Wang, and J. Zhang, “Comparison of Water Absorbed Dose for Photons of Linac and Traceability System for Radiotherapy in China”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 537-539. doi:10.18429/JACoW-IPAC2018-MOPML058
[n] T. Zaugg, C. Rose, J. D. Schneider, J. Sherman, and R. Stevens Jr, “Operation of a Microwave Proton Source in Pulsed Mode”, in Proc. LINAC'98, Chicago, IL, USA, Aug. 1998, paper TH4055, pp. 893-895.
[n] Y. J. Suh et al., “SLED Tuning Control System for PAL-XFEL”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. 1452. doi:10.18429/JACoW-ICALEPCS2019-WEPHA150
[n] R. Huhmann, G. Fr?Âhlich, S. J??licher, and V. R. W. Schaa, “GSI Operating Software Migration OpenVMS to Linux”, in Proc. PCaPAC'08, Ljbuljana, Slovenia, Oct. 2008, paper MOX02, pp. 4-6.
For LaTeX
Use Complete Form
For BibTeX
References
- A. Murokh et al., “Photon Beam Diagnostics for VISA FEL-”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WEP94, pp. 2480-2482.
- S. A. Kahn, M. A. Cummings, E. Z. Barzi, D. Turrioni, S. Falletta, and A. Kikuchi, “Nb3Sn Thin Films for the Production of Higher Gradient SRF Cavities at Reduced Cost”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3716-3719.
- R. Althaus et al., “Performance of Dipole Magnets in Helium II”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 3280-3283.
- M. Puglisi and A. Wrulich, “Progress with ELETTRA, the Synchrotron Light Source in Trieste”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2634-2637.
- K. N. Leung, D. A. Bachman, and D. S. McDonald, “RF Driven Multicusp Ion Source for Particle Accelerator Applications”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 1038-1041.
- D. Stout et al., “Systems Engineering and Integration on the FRIB Project”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper MOPMA08, pp. 312-314.
- X. J. Wang, I. Ben-Zvi, J. Sheehan, and V. Yakimenko, “Brookhaven Accelerator Test Facility Energy Upgrade”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper FRA50, pp. 3495-3497.
- D. K. Olsen et al., “HISTRAP Prototype Hardware Studies”, in Proc. 12th Int. Cyclotron Conf. and Their Applications (Cyclotrons'89), Berlin, Germany, May 1989, paper C-04, pp. 70-75.
- T. Lavine, R. Miller, P. Morton, and R. Ruth, “Transient Analysis of Multicavity Klystrons”, in Proc. 1988 Linear Accelerator Conf. (LINAC'88), Williamsburg, VA, USA, Oct. 1988, paper TH3-25, pp. 589-591.
- S. Ferry, C. Bontoiu, P. Craievich, S. Di Mitri, and E. Karantzoulis, “FERMI@elettra Collimators”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE6RFP043, pp. 2890-2892.
- D. A. Goldberg, G. R. Lambertson, L. Shalz, and F. Voelker, “Measurement of Frequency Response of LBL Stochastic Cooling Arrays for TeV-1 Storage Rings”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 2168-2171.
- D. Kumar, G. G. Ga, M. Plesko, R. Huhmann, and S. Krepp, “Implementation of the Distributed Alarm System for the Particle Accelerator FAIR Using an Actor Concurrent Programming Model and the Concept of an Agent”, in Proc. 10th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'14), Karlsruhe, Germany, Oct. 2014, paper WPO029, pp. 102-104.
- A. Galat?â et al., “ADIGE: The Radioactive Ion Beam Injector of the SPES Project”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 2281-2283.
- W. V. Hassenzahl, E. Hoyer, and R. Savoy, “Design and Test of a Model Pole for the ALS U5.0 Undulator”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2736-2739.
- W. Hassenzahl, “A Comparison of the Costs of Superconducting Accelerator Dipoles Using NbTi, NB 3Sn and NbTiTa”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 3277-3280.
- P. Darriulat, “Superconducting Niobium Films for RF Cavities”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper THX01B, pp. 179-183.
- R. B. Palmer et al., “High-Energy High-Luminosity μ+ μ- Collider Design”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper MXG03, pp. 53-57.
- O. Piquet et al., “SARAF Equipped Cavity Test Stand (ECTS) at CEA”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 852-854.
- F. Di Maio et al., “Development of the ITER CODAC Core Systems”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper MOC005, pp. 22-24.
- V. S. Morozov et al., “Spin-Manipulating Polarized Deuterons”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper TUOCN2, pp. 747-751.
- T. Itahashi, Y. Fujita, T. Fukuda, T. Shimoda, T. Yamagata, and Y. Nagame, “Mass Spectrometry of 41Ca with RCNP AVF Cyclotron”, in Proc. 11th Int. Cyclotron Conf. and Their Applications (Cyclotrons'86), Tokyo, Japan, Oct. 1986, paper K-19, pp. 664-666.
- S. Kwon et al., “FPGA Implementation of a Control System for the LANSCE Accelerator”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 2771-2773.
- A. D. McInturff, P. F. Dahl, R. Damm, K. E. Robins, and W. B. Sampson, “Prototype and Proposed ISABELLE" Dipoles"”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1242-1245.
- O. Karamyshev, G. A. Karamysheva, A. I. Papash, M. R. F. Siggel-King, and C. P. Welsch, “Design of an Antiproton Injection and Matching Beam Line for the AD Recycler Ring”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper WEPC009, pp. 2019-2021.
- A. D. McInturff et al., “The Fermilab Collider DOslash Low /beta System”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 1264-1267.
- D. Wang, J. Liu, and X. L. Wang, “Research on Fault Diagnosis of Power Supply Control System on BEPCII”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 361-364.
- J. Aron et al., “Status of the Argonne Superconducting-Linac Heavy-Ion Booster”, in Proc. 1981 Linear Accelerator Conf. (LINAC'81), Santa Fe, NM, USA, Oct. 1981, paper A203, pp. 25-28.
- R. M. Zwaska et al., “Status of the NuMI Neutrino Beam at Fermilab”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUOAKI01, pp. 691-691.
- J. E. Katuin, J. C. Collins, C. Hagen, W. Manwaring, and P. Zolnierczuk, “Design of a Treatment Control System for a Proton Therapy Facility”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper TUOAFI02, pp. 958-960.
- Y. I. Ida et al., “Development of Vertical Electropolishing Facility for Nb 9-Cell Cavity (3)”, in Proc. 19th Int. Conf. RF Superconductivity (SRF'19), Dresden, Germany, Jun.-Jul. 2019, pp. 470-471.
- G. Carcassi and K. Shroff, “Graphene: A Java Library for Real-Time Scientific Graphs”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper TUPPC133, pp. 901-902.
- R. Nawrocky et al., “An Active Interlock System for the NSLS X-Ray Ring Insertion Devices”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 2790-2793.
- B. Riemann, B. D. Isbarn, S. Khan, S. Koetter, and T. Weis, “Validating the COBEA Algorithm at the DELTA Storage Ring”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 4851-4854.
- W. Weng, “Performances of BNL High-Intensity Synchrotrons”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 5A005, pp. 329-336.
- D. Dohan, G. Carcassi, and L. R. Dalesio, “High Availability On-Line Relational Databases for Accelerator Control and Operation”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper FR5REP001, pp. 4770-4772.
- A. Scheinker et al., “Preliminary Study of Advanced LLRF Controls at LANSCE for Beam Loading Compensation in the MaRIE X-FEL”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 411-413.
- D. L. Judd, “The Fluttering, Spiralling Flight of Cyclotron Evolution”, in Proc. Int. Conf. on Isochronous Cyclotrons (Cyclotrons'66), Gatlinburg, TN, USA, Aug. 1966, paper O-002, pp. XX-XX.
- Yu. S. Fedotov, E. A. Myae, A. A. Asseev, and S. V. Sokolov, “Increase a Bent Crystal Extraction Efficiency by Means of Thin Internal Target”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 318-320.
- K. Volk et al., “A Compact High Brilliance Ion Soruce for RFQ Injection”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1438-1441.
- M. Puglisi, “Status of the Synchrotron Light Source ELETTRA”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 478-481.
- K. N. Leung, D. A. Bachman, D. S. McDonald, and A. T. Young, “Ion Sources for Cyclotron Application”, in Proc. 13th Int. Cyclotron Conf. and Their Applications (Cyclotrons'92), Vancouver, Canada, Jul. 1992, paper VIII-03, pp. 312-315.
- G. G. Denisov et al., “Development of Millimeter-Wave FEM for Electron-Positron Colliders”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper TUP04K, pp. 1915-1917.
- K. Wang, S. Jin, Z. Wang, and J. Zhang, “Comparison of Water Absorbed Dose for Photons of Linac and Traceability System for Radiotherapy in China”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 537-539.
- T. Zaugg, C. Rose, J. D. Schneider, J. Sherman, and R. Stevens Jr, “Operation of a Microwave Proton Source in Pulsed Mode”, in Proc. 19th Int. LINAC Conf. (LINAC'98), Chicago, IL, USA, Aug. 1998, paper TH4055, pp. 893-895.
- Y. J. Suh et al., “SLED Tuning Control System for PAL-XFEL”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. 1452.
- R. Huhmann, G. Fr?Âhlich, S. J??licher, and V. R. W. Schaa, “GSI Operating Software Migration OpenVMS to Linux”, in Proc. 7th Int. Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'08), Ljbuljana, Slovenia, Oct. 2008, paper MOX02, pp. 4-6.
Back to search