Warning
Some papers have malformed authors, please correct this before using these references.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] Z. B. du Toit, L. M. Roels, H. N. Jungwirth, and A. H. Botha, “Calculated and Measured Magnetic Fields for the Injector Cyclotron at the NAC”, in Proc. Cyclotrons'84, East Lansing, MI, USA, Apr.-May 1984, paper B20, pp. 94-97.
[n] S. U. De Silva, J. R. Delayen, and H. Park, “Fabrication, Processing and RF Test of RF-Dipole Prototype Crabbing Cavity for LHC High Luminosity Upgrade”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1174-1176. doi:10.18429/JACoW-IPAC2017-MOPVA135
[n] C. Paraskevopoulos, “The New Small Wheel Low Voltage Power Supply DCS for the ATLAS Experiment”, in Proc. ICALEPCS'21, Shanghai, China, Oct. 2021, pp. 111-114. doi:10.18429/JACoW-ICALEPCS2021-MOPV006
[n] E. D. van Garderen et al., “Injection Efficiency Monitoring System at the Australian Synchrotron”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper MOPF19, pp. 248-251.
[n] T. Manegold et al., “Studies of Collision and Compression of Pulsed Plasmas Generated by Coaxial Accelerators”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1653-1655. doi:10.18429/JACoW-IPAC2018-TUPML051
[n] R. J. Adler, “Emittance Growth in Rippled Solenoidal Magnetic Fields”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1359-1361.
[n] E. Wooldridge and B. Muratori, “4GLS Cavity Considerations for BBU”, in Proc. ERL'07, Daresbury, UK, May 2007, paper 19, pp. 126-128.
[n] L. G. Goralczyk, A. F. Kostopoulos, B. Schofield, and J-C. Tournier, “CERN SCADA Systems 2020 Large Upgrade Campaign Retrospective”, in Proc. ICALEPCS'21, Shanghai, China, Oct. 2021, pp. 156-160. doi:10.18429/JACoW-ICALEPCS2021-MOPV017
[n] K. Saadatmand and N. C. Okay, “Performance of the SSC RF-Driven Volume Source”, in Proc. LINAC'92, Ottawa, Canada, Aug. 1992, paper MO4-21, pp. 97-99.
[n] D. A. Pepler, I. O, and P. B. M. Oliveira, “Upgrading the Synchronisation and Trigger Systems on the Vulcan High-Power Nd:glass Laser”, in Proc. PCaPAC'18, Hsinchu City, Taiwan, Oct. 2018, pp. 187-188. doi:10.18429/JACoW-PCaPAC2018-THP12
[n] V. L. Uvarov et al., “Two-channel Mode of Mo-99 Production at an Electron Accelerator”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPS083, pp. 3627-3629.
[n] P. V. Livdahl, “ZGS Injector Observations”, in Proc. LINAC'64, Madison, WI, USA, Jul. 1964, paper PART4-3, pp. 384-397.
[n] J. R. Rees, “The Positron-Electron Project - PEP”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1836-1842.
[n] S. Petitdemange et al., “LIMA: Library for IMage Acquisition a Worldwide Project for 2D Detector Control”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 886-890. doi:10.18429/JACoW-ICALEPCS2017-TUPHA194
[n] V. Gubin et al., “Experimental Facility for E-Beam Irradiation Test of Prototype IF Target in RISP”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 254-256. doi:10.18429/JACoW-RUPAC2016-TUPSA018
[n] B. Sarkar, S. Bandyopadhyay, C. Datta, and D. Sarkar, “Software for Supervisory Control of the Trim Coil Power Supplies of the Kolkata Superconducting Cyclotron”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper TUP011, pp. XX-XX.
[n] T. F. Lin and J. P. Wang, “The Safety Interlock System of Synchrotron Radiation Research Center”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper TAA14, pp. 2108-2110.
[n] R. Ainsworth, P. Adamson, K. J. Hazelwood, I. Kourbanis, and E. G. Stern, “Simulations and Measurements of Stopbands in the Fermilab Recycler”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 864-866. doi:10.18429/JACoW-IPAC2016-MOPOY010
[n] V. Kamerdzhiev et al., “Concluding the operation and development of COSY”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1653-1656. doi:10.18429/JACoW-IPAC2024-TUPS10
[n] C. Steier et al., “Successful Completion of the ALS Brightness Upgrade”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper TUOCB2, pp. 433-435.
[n] J. A. Dobbing et al., “Diamond Booster Magnet Power Converters”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPLS124, pp. 2664-2666.
[n] W. Beeckman et al., “Development, Fabrication and Testing of the RF-Kicker for the Acculinna-2 Fragment Separator”, in Proc. HIAT'22, Darmstadt, Germany, Jun.-Jul. 2022, pp. 37-40. doi:10.18429/JACoW-HIAT2022-MO4C3
[n] G. A. Filatov et al., “Irradiation Methods and Infrastructure Concepts of New Beam Lines for NICA Applied Research”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2498-2501. doi:10.18429/JACoW-IPAC2021-TUPAB415
[n] X. Yang et al., “Online Optimization of NSLS-II Dynamic Aperture and Injection Transient”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 1159-1162. doi:10.18429/JACoW-IPAC2022-TUPOPT064
[n] M. Dusek, J.-C. Gayde, and M. Sulc, “Generation of symmetrical optical caustic beams for precise alignment”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3333-3336. doi:10.18429/JACoW-IPAC2024-THPG35
[n] H. Heydari and T. Tille, “Reason for Free Electrons from the Surface of Ferroelectrics with a Metal Lattice Structure”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 6W037, pp. 2784-2786.
[n] P. Zakalek et al., “High-Brilliance Neutron Source Project”, in Proc. HIAT'18, Lanzhou, China, Oct. 2018, pp. 117-121. doi:10.18429/JACoW-HIAT2018-WEZAA01
[n] P. Proudlock and H. W. Isch, “The Power Converters for the RF Klystrons of LEP”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1209-1212.
[n] G. Arduini et al., “Measurement of the Electron Cloud Properties by Means of a Multi-strip Detector in the CERN SPS”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper WEPDO002, pp. 1437-1439.
[n] J-P. Airiau, V. Denis, H. Durandeau, P. Fourtillan, N. Loustalet, and P. Torrent, “Laser Megajoule Facility Operating Software Overview”, in Proc. ICALEPCS'21, Shanghai, China, Oct. 2021, pp. 104-107. doi:10.18429/JACoW-ICALEPCS2021-MOPV003
[n] J. Ungrin et al., “Construction of a High-Power RF Resonant Test Load”, in Proc. LINAC'81, Santa Fe, NM, USA, Oct. 1981, paper B12, pp. 68-70.
[n] D. E. Anderson and L. X. Schneider, “Design and preliminary Testing of the LEB Extraction Kicker Magnet at the SSC”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1354-1357.
For LaTeX
Use Complete Form
For BibTeX
References
- Z. B. du Toit, L. M. Roels, H. N. Jungwirth, and A. H. Botha, “Calculated and Measured Magnetic Fields for the Injector Cyclotron at the NAC”, in Proc. 10th Int. Cyclotron Conf. and Their Applications (Cyclotrons'84), East Lansing, MI, USA, Apr.-May 1984, paper B20, pp. 94-97.
- S. U. De Silva, J. R. Delayen, and H. Park, “Fabrication, Processing and RF Test of RF-Dipole Prototype Crabbing Cavity for LHC High Luminosity Upgrade”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1174-1176.
- C. Paraskevopoulos, “The New Small Wheel Low Voltage Power Supply DCS for the ATLAS Experiment”, in Proc. 18th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'21), Shanghai, China, Oct. 2021, pp. 111-114.
- E. D. van Garderen et al., “Injection Efficiency Monitoring System at the Australian Synchrotron”, in Proc. 2nd Int. Beam Instrumentation Conf. (IBIC'13), Oxford, UK, Sep. 2013, paper MOPF19, pp. 248-251.
- T. Manegold et al., “Studies of Collision and Compression of Pulsed Plasmas Generated by Coaxial Accelerators”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 1653-1655.
- R. J. Adler, “Emittance Growth in Rippled Solenoidal Magnetic Fields”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 1359-1361.
- E. Wooldridge and B. Muratori, “4GLS Cavity Considerations for BBU”, in Proc. 41st Advanced ICFA Beam Dynamics Workshop on Energy Recovery Linacs (ERL'07), Daresbury, UK, May 2007, paper 19, pp. 126-128.
- L. G. Goralczyk, A. F. Kostopoulos, B. Schofield, and J-C. Tournier, “CERN SCADA Systems 2020 Large Upgrade Campaign Retrospective”, in Proc. 18th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'21), Shanghai, China, Oct. 2021, pp. 156-160.
- K. Saadatmand and N. C. Okay, “Performance of the SSC RF-Driven Volume Source”, in Proc. 1992 Linear Accelerator Conf. (LINAC'92), Ottawa, Canada, Aug. 1992, paper MO4-21, pp. 97-99.
- D. A. Pepler, I. O, and P. B. M. Oliveira, “Upgrading the Synchronisation and Trigger Systems on the Vulcan High-Power Nd:glass Laser”, in Proc. 12th International Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'18), Hsinchu City, Taiwan, Oct. 2018, pp. 187-188.
- V. L. Uvarov et al., “Two-channel Mode of Mo-99 Production at an Electron Accelerator”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPS083, pp. 3627-3629.
- P. V. Livdahl, “ZGS Injector Observations”, in Proc. 1964 Linear Accelerator Conf. (LINAC'64), Madison, WI, USA, Jul. 1964, paper PART4-3, pp. 384-397.
- J. R. Rees, “The Positron-Electron Project - PEP”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1836-1842.
- S. Petitdemange et al., “LIMA: Library for IMage Acquisition a Worldwide Project for 2D Detector Control”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 886-890.
- V. Gubin et al., “Experimental Facility for E-Beam Irradiation Test of Prototype IF Target in RISP”, in Proc. 25th Russian Particle Accelerator Conf. (RuPAC'16), Saint Petersburg, Russia, Nov. 2016, pp. 254-256.
- B. Sarkar, S. Bandyopadhyay, C. Datta, and D. Sarkar, “Software for Supervisory Control of the Trim Coil Power Supplies of the Kolkata Superconducting Cyclotron”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper TUP011, pp. XX-XX.
- T. F. Lin and J. P. Wang, “The Safety Interlock System of Synchrotron Radiation Research Center”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper TAA14, pp. 2108-2110.
- R. Ainsworth, P. Adamson, K. J. Hazelwood, I. Kourbanis, and E. G. Stern, “Simulations and Measurements of Stopbands in the Fermilab Recycler”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 864-866.
- V. Kamerdzhiev et al., “Concluding the operation and development of COSY”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPS10, pp. 1653-1656.
- C. Steier et al., “Successful Completion of the ALS Brightness Upgrade”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper TUOCB2, pp. 433-435.
- J. A. Dobbing et al., “Diamond Booster Magnet Power Converters”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper WEPLS124, pp. 2664-2666.
- W. Beeckman et al., “Development, Fabrication and Testing of the RF-Kicker for the Acculinna-2 Fragment Separator”, in Proc. 15th International Conference on Heavy Ion Accelerator Technology (HIAT'22), Darmstadt, Germany, Jun.-Jul. 2022, pp. 37-40.
- G. A. Filatov et al., “Irradiation Methods and Infrastructure Concepts of New Beam Lines for NICA Applied Research”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 2498-2501.
- X. Yang et al., “Online Optimization of NSLS-II Dynamic Aperture and Injection Transient”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 1159-1162.
- M. Dusek, J.-C. Gayde, and M. Sulc, “Generation of symmetrical optical caustic beams for precise alignment”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPG35, pp. 3333-3336.
- H. Heydari and T. Tille, “Reason for Free Electrons from the Surface of Ferroelectrics with a Metal Lattice Structure”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 6W037, pp. 2784-2786.
- P. Zakalek et al., “High-Brilliance Neutron Source Project”, in Proc. 14th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'18), Lanzhou, China, Oct. 2018, pp. 117-121.
- P. Proudlock and H. W. Isch, “The Power Converters for the RF Klystrons of LEP”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1209-1212.
- G. Arduini et al., “Measurement of the Electron Cloud Properties by Means of a Multi-strip Detector in the CERN SPS”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper WEPDO002, pp. 1437-1439.
- J-P. Airiau, V. Denis, H. Durandeau, P. Fourtillan, N. Loustalet, and P. Torrent, “Laser Megajoule Facility Operating Software Overview”, in Proc. 18th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'21), Shanghai, China, Oct. 2021, pp. 104-107.
- J. Ungrin et al., “Construction of a High-Power RF Resonant Test Load”, in Proc. 1981 Linear Accelerator Conf. (LINAC'81), Santa Fe, NM, USA, Oct. 1981, paper B12, pp. 68-70.
- D. E. Anderson and L. X. Schneider, “Design and preliminary Testing of the LEB Extraction Kicker Magnet at the SSC”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 1354-1357.
Back to search