Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] J. A. Fox, “Static Power Supplies for Pulsed Loads”, in Proc. PAC'69, Washington D.C., USA, Mar. 1969, pp. 677-682.
[n] P. Fessia et al., “The LHC Continuous Cryostat Interconnections: the Organization of a Logistically Complex Worksite Requiring Strict Quality Standards and High Output”, in Proc. EPAC'08, Genoa, Italy, Jun. 2008, paper WEPD012, pp. 2428-2430.
[n] M. E. Biagini, “DAPhiNE Status Report”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 60-63.
[n] G. Tool, R. Flora, P. Martin, and D. Wolff, “Energy Saver Partial Ring Power Tests”, in Proc. PAC'83, Santa Fe, NM, USA, Mar. 1983, pp. 2889-2892.
[n] A. Schnase et al., “Progress of the Klystron and Cavity Test Stand for the FAIR Proton Linac”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2802-2804. doi:10.18429/JACoW-IPAC2015-WEPMA022
[n] W. B. Zhao et al., “A Freon-filled Bubble Chamber for Gamma-ray Detection in Strong Laser-plasma Interaction”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3512-3514. doi:10.18429/JACoW-IPAC2014-THPME118
[n] C. Liu, W. Ackermann, W. F. O. Müller, and T. Weiland, “Various Approaches to Electromagnetic Field Simulations for RF Cavities”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPC059, pp. 268-270.
[n] E. Medvedko, R. Aiello, and S. Smith, “A Two-Bunch Beam Position Monitor”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 9P084, pp. 2113-2115.
[n] H. Moritani et al., “RF Design of a Cartridge-type Photocathode RF Gun in S-band Linac”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPLS053, pp. 2499-2501.
[n] J. Allard, O. Jonsson, F. Locci, and G. Mornacchi, “Rejuvenation of the Controls of the CERN ISOLDE Facility using Industrial Components”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper TUAP034, pp. XX-XX.
[n] P. Nonn et al., “Pulsed Low Level Baseband RF Control of CH-Cavities for p-Linac at FAIR”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2421-2423. doi:10.18429/JACoW-IPAC2014-WEPME063
[n] V. A. Goryashko, M. Dohlus, M. Hamberg, and V. G. Ziemann, “Transverse Alignment Tolerances for the European XFEL Laser Heater”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper THPC097, pp. 3116-3118.
[n] C. Limborg, A. Ringwall, M. Rowen, and J. Stieber, “An Ultra-Violet Light Monitor for SPEAR3”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper THPRI096, pp. 1924-1926.
[n] T. Jurgens, Q. Kerns, J. Fritz, and M. May, “An Alternate Side Coupled Structure for the Fermilab Linac Upgrade”, in Proc. LINAC'88, Williamsburg, VA, USA, Oct. 1988, paper MO3-57, pp. 190-191.
[n] R. Smith, G. Roberto Aiello, J. Hendrickson, G. Johnson, R. Mills, and J. Olsen, “Beam Position Monitor System for PEP-II”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 9P087, pp. 2122-2124.
[n] Z. L. Zhang, A. V. Aleksandrov, and S. M. Cousineau, “FODO Lattice Design for Beam Halo Research at SNS”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 2449-2451. doi:10.18429/JACoW-IPAC2017-TUPVA148
[n] P. Bosland et al., “Third Harmonic Superconducting Passive Cavities in ELETTRA and SLS”, in Proc. SRF'03, Lübeck, Germany, Sep. 2003, paper TUO06, pp. 239-243.
[n] J. J. Hartzell et al., “Switching Magnet for Heavy-Ion Beam Separation”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 4403-4406. doi:10.18429/JACoW-IPAC2017-THPIK128
[n] M. O. Hyun et al., “Fabrication and Installation of Newly Designed Cryostats and Top Flanges for the Vertical Test of RISP”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, pp. 733. doi:10.18429/JACoW-SRF2021-THPFAV002
[n] M. H. Van de Voorde, “Radiation Resistance of Organic Materials at Cryo-Temperatures”, in Proc. PAC'71, Chicago, IL, USA, Mar. 1971, pp. 784-786.
[n] P. N. Potukuchi et al., “The Booster Linac for the New Delhi Pelletron”, in Proc. SRF'93, Newport News, VA, USA, Oct. 1993, paper SRF93J06, pp. XX-XX.
[n] K. Noda, A. Noda, and I. Katayama, “Simulation of Beams in TARN II with a Solid Target”, in Proc. Cyclotrons'86, Tokyo, Japan, Oct. 1986, paper C-06, pp. 145-148.
[n] P. Bellomo, A. R. Donaldson, and D. MacNair, “B-Factory Intermediate DC Magnet Power Systems Reliability Modeling and Results”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper FPAH011, pp. 3684-3686.
[n] G. Costanza, “On the Optimal Design of Elliptical Superconducting Cavities”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2565-2567. doi:10.18429/JACoW-IPAC2014-WEPRI040
[n] R. Corsini, J. P. Delahaye, C. Johnson, A. Millich, and A. Riche, “A Multi-Drive Beam Scheme for Two-Beam Acceleration in a TeV Linear Collider”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 2W003, pp. 563-565.
[n] A. A. Aksoy et al., “Conceptual Design of a X-FEL Facility using CLIC X-band Accelerating Structure”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2914-2917. doi:10.18429/JACoW-IPAC2014-THPRO025
[n] M. Pivi, G. Dugan, M. Palmer, and K. Sonnad, “Simulation of Electron Cloud Induced Instabilities and Emittance Growth for CesrTA”, in Proc. ECLOUD'10, Ithaca, NY, USA, Oct. 2010, paper FTR02, pp. 203-207.
[n] N. Yamamoto, A. Akiyama, T. Katoh, J. Odagiri, S. Matsuzaki, and N. Ishibashi, “Utility Facility Monitoring System on Linux-based IOC for the KEKB”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper WP561, pp. XX-XX.
[n] J. N. Weaver et al., “The Linac and Booster RF Systems for a Dedicated Injector for SPEAR”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 769-772.
[n] M. Pivi and L. Wang, “Trapping of Electron Cloud in ILC / CesrTA Quadrupole and Sextupole Magnets”, in Proc. ECLOUD'10, Ithaca, NY, USA, Oct. 2010, paper MOD05, pp. 167-172.
[n] S. H. Han and Y. S. Cho, “Beam Profile Measurement with CCD Camera at PEFP”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper THP21007, pp. XX-XX.
[n] C. A. Penner, C. Duzenli, C. M. Hoehr, C. Lindsay, and S. O, “Timing Resolution for an Optical Fibre-Based Detector in a 74 MeV Proton Therapy Beam”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 575-577. doi:10.18429/JACoW-IPAC2018-MOPML072
[n] W. H. Hwang et al., “Phase Amplitude Detection (PAD) and Phase Amplitude Control (PAC) for PXFEL”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE5PFP094, pp. 2231-2233.
[n] S. M. Ananiev et al., “Magnets for the COMBAS Large-Acceptance Spectrometer”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1370-1373.
[n] D. Martin, “Alignment at the ESRF”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 141-144.
[n] Y. S. Cho, B. H. Choi, K. H. Chung, and G. S. Lee, “Design and Construction of Synchrotron Radiation Source CESS Phase I”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 606-609.
[n] C. Fischer, G. Burtin, R. Colchester, B. Halvarsson, R. Jung, and J. M. Vouillot, “Studies of Fast Wire Scanners for LEP”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 1081-1084.
[n] G. Troubnikov et al., “The Low Energy Positron Storage Ring for Positronium Generation: Status and Developments”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPDO017, pp. 1103-1105.
[n] J. Buon, “Final Focus Test Beam for the Next Linear Collider”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 125-128.
For LaTeX
Use Complete Form
For BibTeX
References
- J. A. Fox, “Static Power Supplies for Pulsed Loads”, in Proc. 3rd Particle Accelerator Conf. (PAC'69), Washington D.C., USA, Mar. 1969, pp. 677-682.
- P. Fessia et al., “The LHC Continuous Cryostat Interconnections: the Organization of a Logistically Complex Worksite Requiring Strict Quality Standards and High Output”, in Proc. 11th European Particle Accelerator Conf. (EPAC'08), Genoa, Italy, Jun. 2008, paper WEPD012, pp. 2428-2430.
- M. E. Biagini, “DAPhiNE Status Report”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 60-63.
- G. Tool, R. Flora, P. Martin, and D. Wolff, “Energy Saver Partial Ring Power Tests”, in Proc. 10th Particle Accelerator Conf. (PAC'83), Santa Fe, NM, USA, Mar. 1983, pp. 2889-2892.
- A. Schnase et al., “Progress of the Klystron and Cavity Test Stand for the FAIR Proton Linac”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 2802-2804.
- W. B. Zhao et al., “A Freon-filled Bubble Chamber for Gamma-ray Detection in Strong Laser-plasma Interaction”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 3512-3514.
- C. Liu, W. Ackermann, W. F. O. Müller, and T. Weiland, “Various Approaches to Electromagnetic Field Simulations for RF Cavities”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper MOPPC059, pp. 268-270.
- E. Medvedko, R. Aiello, and S. Smith, “A Two-Bunch Beam Position Monitor”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 9P084, pp. 2113-2115.
- H. Moritani et al., “RF Design of a Cartridge-type Photocathode RF Gun in S-band Linac”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper WEPLS053, pp. 2499-2501.
- J. Allard, O. Jonsson, F. Locci, and G. Mornacchi, “Rejuvenation of the Controls of the CERN ISOLDE Facility using Industrial Components”, in Proc. 8th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'01), San Jose, CA, USA, Nov. 2001, paper TUAP034, pp. XX-XX.
- P. Nonn et al., “Pulsed Low Level Baseband RF Control of CH-Cavities for p-Linac at FAIR”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2421-2423.
- V. A. Goryashko, M. Dohlus, M. Hamberg, and V. G. Ziemann, “Transverse Alignment Tolerances for the European XFEL Laser Heater”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper THPC097, pp. 3116-3118.
- C. Limborg, A. Ringwall, M. Rowen, and J. Stieber, “An Ultra-Violet Light Monitor for SPEAR3”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper THPRI096, pp. 1924-1926.
- T. Jurgens, Q. Kerns, J. Fritz, and M. May, “An Alternate Side Coupled Structure for the Fermilab Linac Upgrade”, in Proc. 1988 Linear Accelerator Conf. (LINAC'88), Williamsburg, VA, USA, Oct. 1988, paper MO3-57, pp. 190-191.
- R. Smith, G. Roberto Aiello, J. Hendrickson, G. Johnson, R. Mills, and J. Olsen, “Beam Position Monitor System for PEP-II”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 9P087, pp. 2122-2124.
- Z. L. Zhang, A. V. Aleksandrov, and S. M. Cousineau, “FODO Lattice Design for Beam Halo Research at SNS”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 2449-2451.
- P. Bosland et al., “Third Harmonic Superconducting Passive Cavities in ELETTRA and SLS”, in Proc. 11th Workshop RF Superconductivity (SRF'03), Lübeck, Germany, Sep. 2003, paper TUO06, pp. 239-243.
- J. J. Hartzell et al., “Switching Magnet for Heavy-Ion Beam Separation”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 4403-4406.
- M. O. Hyun et al., “Fabrication and Installation of Newly Designed Cryostats and Top Flanges for the Vertical Test of RISP”, in Proc. 20th International Conference on RF Superconductivity (SRF'21), East Lansing, MI, USA, Jun.-Jul. 2021, pp. 733.
- M. H. Van de Voorde, “Radiation Resistance of Organic Materials at Cryo-Temperatures”, in Proc. 4th Particle Accelerator Conf. (PAC'71), Chicago, IL, USA, Mar. 1971, pp. 784-786.
- P. N. Potukuchi et al., “The Booster Linac for the New Delhi Pelletron”, in Proc. 6th Int. Conf. RF Superconductivity (SRF'93), Newport News, VA, USA, Oct. 1993, paper SRF93J06, pp. XX-XX.
- K. Noda, A. Noda, and I. Katayama, “Simulation of Beams in TARN II with a Solid Target”, in Proc. 11th Int. Cyclotron Conf. and Their Applications (Cyclotrons'86), Tokyo, Japan, Oct. 1986, paper C-06, pp. 145-148.
- P. Bellomo, A. R. Donaldson, and D. MacNair, “B-Factory Intermediate DC Magnet Power Systems Reliability Modeling and Results”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper FPAH011, pp. 3684-3686.
- G. Costanza, “On the Optimal Design of Elliptical Superconducting Cavities”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2565-2567.
- R. Corsini, J. P. Delahaye, C. Johnson, A. Millich, and A. Riche, “A Multi-Drive Beam Scheme for Two-Beam Acceleration in a TeV Linear Collider”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 2W003, pp. 563-565.
- A. A. Aksoy et al., “Conceptual Design of a X-FEL Facility using CLIC X-band Accelerating Structure”, in Proc. 5th Int. Particle Accelerator Conf. (IPAC'14), Dresden, Germany, Jun. 2014, pp. 2914-2917.
- M. Pivi, G. Dugan, M. Palmer, and K. Sonnad, “Simulation of Electron Cloud Induced Instabilities and Emittance Growth for CesrTA”, in Proc. 49th ICFA Advanced Beam Dynamics Workshop on Electron Cloud Physics (ECLOUD'10), Ithaca, NY, USA, Oct. 2010, paper FTR02, pp. 203-207.
- N. Yamamoto, A. Akiyama, T. Katoh, J. Odagiri, S. Matsuzaki, and N. Ishibashi, “Utility Facility Monitoring System on Linux-based IOC for the KEKB”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper WP561, pp. XX-XX.
- J. N. Weaver et al., “The Linac and Booster RF Systems for a Dedicated Injector for SPEAR”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 769-772.
- M. Pivi and L. Wang, “Trapping of Electron Cloud in ILC / CesrTA Quadrupole and Sextupole Magnets”, in Proc. 49th ICFA Advanced Beam Dynamics Workshop on Electron Cloud Physics (ECLOUD'10), Ithaca, NY, USA, Oct. 2010, paper MOD05, pp. 167-172.
- S. H. Han and Y. S. Cho, “Beam Profile Measurement with CCD Camera at PEFP”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper THP21007, pp. XX-XX.
- C. A. Penner, C. Duzenli, C. M. Hoehr, C. Lindsay, and S. O, “Timing Resolution for an Optical Fibre-Based Detector in a 74 MeV Proton Therapy Beam”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 575-577.
- W. H. Hwang et al., “Phase Amplitude Detection (PAD) and Phase Amplitude Control (PAC) for PXFEL”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE5PFP094, pp. 2231-2233.
- S. M. Ananiev et al., “Magnets for the COMBAS Large-Acceptance Spectrometer”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 1370-1373.
- D. Martin, “Alignment at the ESRF”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 141-144.
- Y. S. Cho, B. H. Choi, K. H. Chung, and G. S. Lee, “Design and Construction of Synchrotron Radiation Source CESS Phase I”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 606-609.
- C. Fischer, G. Burtin, R. Colchester, B. Halvarsson, R. Jung, and J. M. Vouillot, “Studies of Fast Wire Scanners for LEP”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 1081-1084.
- G. Troubnikov et al., “The Low Energy Positron Storage Ring for Positronium Generation: Status and Developments”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper TUPDO017, pp. 1103-1105.
- J. Buon, “Final Focus Test Beam for the Next Linear Collider”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 125-128.
Back to search