Warning
Some papers have malformed authors, please correct this before using these references.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] P. V. Martyshkin and R. M. Lapik, “The Capture Efficiency of High Field Flux Concentrator”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPAH301, pp. 2404-2405.
[n] T. J. Fessenden, D. Keefe, C. Kim, H. Meuth, and A. Warwick, “The LBL Multiple Beam Experiments”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 898-903.
[n] S. Bettoni et al., “Beam Manipulation Using Self-Induced Fields in the SwissFEL Injector”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3401-3404. doi:10.18429/JACoW-IPAC2018-THPAK074
[n] P. Gayet, J. Casas-Cubillos, P. Gomes, M. Pezzetti, C.-H. Sicard, and F. J. Varas, “Application of Object-based Industrial Controls for Cryogenics”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper MOPDO030, pp. 2013-2015.
[n] J. Susta, “Development in Fabrication Methods”, in Proc. SRF'84, Geneva, Switzerland, Jul. 1984, paper SRF84-32, pp. XX-XX.
[n] L. Mekinda et al., “Securing Light Source SCADA Systems”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 1142-1148. doi:10.18429/JACoW-ICALEPCS2017-THBPA02
[n] M. A. Kostin et al., “Radiation Environment at ISOL Target Station of Rare Isotope Facility”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper TUPAS052, pp. 1766-1768.
[n] M. Punna, P. Chandra, S. V. Godambe, S. Mohanan, and P. Sridharan, “Automated Scheduler Software Based on Metro UI Design for MACE Telescope”, in Proc. ICALEPCS'21, Shanghai, China, Oct. 2021, pp. 814-818. doi:10.18429/JACoW-ICALEPCS2021-THAR03
[n] K. Wittenburg, “Experience with the Residual Gas Ionisation Beam Profile Monitors at the DESY Proton Accelerators”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1133-1136.
[n] R. J. Roussel, A. L. Edelen, J. P. Gonzalez-Aguilera, Y. K. Kim, and C. E. Mayes, “Bayesian Techniques for Accelerator Characterization and Control”, in Proc. ICALEPCS'21, Shanghai, China, Oct. 2021, pp. 791-796. doi:10.18429/JACoW-ICALEPCS2021-THAL02
[n] D. McGhee, J. Bogaty, and W. Praeg, “A 28 kV _ 0.025%, 200 kW DC Power Supply”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3746-3749.
[n] S. C. Joshi, N. Sharma, N. Kumar, S. Raghvendra, S. A. Pande, and G. V. Kane, “3D Thermal-Fluid Coupled Analysis for 350 MHz RFQ for Indian SNS Programme”, in Proc. APAC'04, Gyeongju, Korea, Mar. 2004, paper TUP11016, pp. XX-XX.
[n] C. Charrondi?¿re, E. Chevallay, and T. Zilliox, “Challenges of Automating the Photocathode Fabrication Process at CERN”, in Proc. ICALEPCS'21, Shanghai, China, Oct. 2021, pp. 464-467. doi:10.18429/JACoW-ICALEPCS2021-TUPV032
[n] E. Tanke, S. Valero, P. Lapostolle, and A. M. Lombardi, “HERSC: A New 3 Dimensional Space Charge Routine for High Intensity Bunched Beams”, in Proc. LINAC'02, Gyeongju, Korea, Aug. 2002, paper TH424, pp. 656-658.
[n] M. Bree, T. Batten, C. W. Stevens, and J. M. Vogt, “Canadian Light Source Beam Position Visualization Tool”, in Proc. IBIC'23, Saskatoon, Canada, Sep. 2023, pp. 24-28. doi:10.18429/JACoW-IBIC2023-MO3C05
[n] J. Bosser et al., “Stability Conditions for a Neutralised Electron Cooling Beam”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RAP23, pp. 2940-2942.
For LaTeX
Use Complete Form
For BibTeX
References
- P. V. Martyshkin and R. M. Lapik, “The Capture Efficiency of High Field Flux Concentrator”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper WPAH301, pp. 2404-2405.
- T. J. Fessenden, D. Keefe, C. Kim, H. Meuth, and A. Warwick, “The LBL Multiple Beam Experiments”, in Proc. 12th Particle Accelerator Conf. (PAC'87), Washington D.C., USA, Mar. 1987, pp. 898-903.
- S. Bettoni et al., “Beam Manipulation Using Self-Induced Fields in the SwissFEL Injector”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3401-3404.
- P. Gayet, J. Casas-Cubillos, P. Gomes, M. Pezzetti, C.-H. Sicard, and F. J. Varas, “Application of Object-based Industrial Controls for Cryogenics”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper MOPDO030, pp. 2013-2015.
- J. Susta, “Development in Fabrication Methods”, in Proc. 2nd Int. Conf. RF Superconductivity (SRF'84), Geneva, Switzerland, Jul. 1984, paper SRF84-32, pp. XX-XX.
- L. Mekinda et al., “Securing Light Source SCADA Systems”, in Proc. 16th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'17), Barcelona, Spain, Oct. 2017, pp. 1142-1148.
- M. A. Kostin et al., “Radiation Environment at ISOL Target Station of Rare Isotope Facility”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper TUPAS052, pp. 1766-1768.
- M. Punna, P. Chandra, S. V. Godambe, S. Mohanan, and P. Sridharan, “Automated Scheduler Software Based on Metro UI Design for MACE Telescope”, in Proc. 18th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'21), Shanghai, China, Oct. 2021, pp. 814-818.
- K. Wittenburg, “Experience with the Residual Gas Ionisation Beam Profile Monitors at the DESY Proton Accelerators”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 1133-1136.
- R. J. Roussel, A. L. Edelen, J. P. Gonzalez-Aguilera, Y. K. Kim, and C. E. Mayes, “Bayesian Techniques for Accelerator Characterization and Control”, in Proc. 18th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'21), Shanghai, China, Oct. 2021, pp. 791-796.
- D. McGhee, J. Bogaty, and W. Praeg, “A 28 kV _ 0.025%, 200 kW DC Power Supply”, in Proc. 11th Particle Accelerator Conf. (PAC'85), Vancouver, Canada, May 1985, pp. 3746-3749.
- S. C. Joshi, N. Sharma, N. Kumar, S. Raghvendra, S. A. Pande, and G. V. Kane, “3D Thermal-Fluid Coupled Analysis for 350 MHz RFQ for Indian SNS Programme”, in Proc. 3rd Asian Particle Accelerator Conf. (APAC'04), Gyeongju, Korea, Mar. 2004, paper TUP11016, pp. XX-XX.
- C. Charrondi?¿re, E. Chevallay, and T. Zilliox, “Challenges of Automating the Photocathode Fabrication Process at CERN”, in Proc. 18th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'21), Shanghai, China, Oct. 2021, pp. 464-467.
- E. Tanke, S. Valero, P. Lapostolle, and A. M. Lombardi, “HERSC: A New 3 Dimensional Space Charge Routine for High Intensity Bunched Beams”, in Proc. 21st Linear Accelerator Conf. (LINAC'02), Gyeongju, Korea, Aug. 2002, paper TH424, pp. 656-658.
- M. Bree, T. Batten, C. W. Stevens, and J. M. Vogt, “Canadian Light Source Beam Position Visualization Tool”, in Proc. 12th International Beam Instrumentation Conference (IBIC'23), Saskatoon, Canada # e.g. "Barcelona, Spain" or "San Francisco, CA, USA", Sep. 2023, paper MO3C05, pp. 24-28.
- J. Bosser et al., “Stability Conditions for a Neutralised Electron Cooling Beam”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper RAP23, pp. 2940-2942.
Back to search