Warning
Please note that we have recently received feedback indicated that atleast one of these reference may have a problem.
Some papers titles are all uppercase, you must correct this before using this reference.
Some papers have malformed authors, please correct this before using these references.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] A. M. Ghaith et al., “Progress of Pr2Fe14B Based Hybrid Cryogenic Undulators at SOLEIL”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 1213-1216. doi:10.18429/JACoW-IPAC2017-TUOAA3
[n] A. A. Zavadtsev, D. Churanov, D. A. Zavadtsev, and D. A. Zybin, “Solid-State Modulators for Particle Accelerators”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 600-602. doi:10.18429/JACoW-RUPAC2016-THPSC027
[n] L. Yan and Z. Liu, “Coherent synchrotron radiation instability in steady-state microbunching ring”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper WEPS004, unpublished.
[n] R. Sundelin, “Superconducting RF Activities at Cornell University”, in Proc. SRF'84, Geneva, Switzerland, Jul. 1984, paper SRF84-3, pp. XX-XX.
[n] Y. Jongen, G. A. Karamysheva, N. A. Morozov, E. Samsonov, D. Vandeplassche, and S. E. Zaremba, “Computer Modeling of Magnetic System for C400 Superconducting Cyclotron”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPLS092, pp. 2589-2591.
[n] H. Huang, P. Adams, E. C. Aschenauer, A. Poblaguev, and W. B. Schmidke, “Analysis of Polarization Decay at RHIC Store”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 76-78. doi:10.18429/JACoW-IPAC2018-MOZGBF5
[n] J. Fern?índez et al., “Status of the uTCA Digital LLRF design for SARAF Phase II”, in Proc. ICALEPCS'21, Shanghai, China, Oct. 2021, pp. 720-723. doi:10.18429/JACoW-ICALEPCS2021-WEPV031
[n] Q. Wu, S. U. De Silva, Y. Luo, J. A. Mitchell, and B. P. Xiao, “EIC Crab Cavity Multipole Analysis”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2589-2591. doi:10.18429/JACoW-IPAC2021-WEPAB006
[n] Z. Liu, H. Deng, Z. Jiang, X. Li, H. Qian, and G. Shu, “The correction of beam trajectory for low energy injector”, presented at the IPAC'25, Taipei, Taiwan, Jun. 2025, paper MOPS026, unpublished.
[n] A. S. Alexandrova and C. P. Welsch, “Laser Diode Velocimeter-Monitor Based on Self-Mixing Technique”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper MOPF03, pp. 200-203.
[n] V. L. Allan, G. Brajnik, and L. R. Brederode, “Using BDD Testing in SKAO: Challenges and Opportunities”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 183-190. doi:10.18429/JACoW-ICALEPCS2023-MO4BCO01
[n] J. M. Baze, P. Bernard, M. Feldmann, and C. Lecoeur, “The Vacuum Chamber of the GANIL SSC”, in Proc. Cyclotrons'78, Bloomington, IN, USA, Sep. 1978, paper A-14, pp. 1938-1939.
[n] K. J. Kugler, W. Paul, and U. Trinks, “A Superconducting Storage Ring for Very Slow Neutrons”, in Proc. PAC'79, San Francisco, CA, USA, Mar. 1979, pp. 3152-3155.
[n] A. E. Pollard, D. J. Dunning, and A. J. Gilfellon, “Machine Learning for RF Breakdown Detection at CLARA”, in Proc. ICALEPCS'21, Shanghai, China, Oct. 2021, pp. 681-685. doi:10.18429/JACoW-ICALEPCS2021-WEPV021
[n] R. Doelling, P. Grobeta, H. Klein, J. Pozimski, and K. Reidelbach, “Plasma Potential and Temperature Measurements of a Thin Plasma by use of Langmuir-Probes”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 1755-1758.
[n] P. Adams, N. A. Kling, C. Liu, and G. J. Marr, “Use of the Base-Band Tune Meter Kickers During the FY18 STAR Fixed Target Run at 3.85 GeV/u”, in Proc. NAPAC'19, Lansing, MI, USA, Sep. 2019, pp. 820-822. doi:10.18429/JACoW-NAPAC2019-WEPLH08
[n] J. H. Kelly, “Experimental Modal Analysis Vibration Measurement to Inform Engineering Design”, in Proc. MEDSI'18, Paris, France, Jun. 2018, pp. 235-237. doi:10.18429/JACoW-MEDSI2018-WEPH15
[n] V. Rieker, J. J. Bateman, R. Corsini, L. A. Dyks, W. Farabolini, and P. Korysko, “VHEE High Dose Rate Dosimetry Studies in CLEAR”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 3026-3029. doi:10.18429/JACoW-IPAC2022-THPOMS031
[n] H.-C. Hseuh, P. He, and R. J. Todd, “Metallization of SNS Ring Injection Kicker Ceramic Vacuum Chambers”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper WEPDO037, pp. 2556-2558.
[n] P. Bado, M. Dugan, A. A. Said, K. J. Suthar, A. Zholents, and A. E. Siy, “Fabrication of the Transition Section of a Corrugated Wakefield Accelerator via Laser Micromachining”, in Proc. MEDSI'20, Chicago, USA, Jul. 2021, pp. 175. doi:10.18429/JACoW-MEDSI2020-TUPB15
[n] E. Hamwi, G. Hoffstaetter, V. Schoefer, and W. Lin, “Comprehensive modeling of Siberian Snakes in BNL’s AGS: symplectic tracking and optical compensation”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 686-689. doi:10.18429/JACoW-IPAC2024-MOPS03
[n] M. M. Donatti, D. H. C. Araujo, F. H. Cardoso, G. B. Z. L, L. Sanfelici, and G. T. Semissatto, “Multi-Channel Heaters Driver for Sirius Beamline's Optical Devices”, in Proc. ICALEPCS'21, Shanghai, China, Oct. 2021, pp. 705-709. doi:10.18429/JACoW-ICALEPCS2021-WEPV026
[n] P. A. Arrutia Sota, P. Burrows, H. Damerau, M. A. Fraser, M. Vadai, and F. M. Velotti, “Implementation of RF Channeling at the CERN PS for Spill Quality Improvements”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 2114-2117. doi:10.18429/JACoW-IPAC2022-WEPOTK028
[n] P. Pizzol et al., “Progress of MgB2 Deposition Technique for SRF Cavities at LANL”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, pp. 482. doi:10.18429/JACoW-SRF2021-TUPTEV003
[n] I. Lobach, S. Nagaitsev, E. G. Stern, and T. Zolkin, “McMillan Lens in a System with Space Charge”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3143-3145. doi:10.18429/JACoW-IPAC2018-THPAF071
[n] M. P. McCarthy et al., “Spallation Neutron Source High Power RF Installation and Commissioning Progress”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper WPAT061, pp. 3520-3522.
[n] P. I. Gladkikh et al., “PSR-2000. Beam Extraction to SP-103”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1495-1498.
[n] D. T. Abell, J. P. Edelen, B. G. Freeman, R. Kazimi, D. G. Moser, and C. Tennant, “Development of a Smart Alarm System for the CEBAF Injector”, in Proc. ICALEPCS'21, Shanghai, China, Oct. 2021, pp. 691-694. doi:10.18429/JACoW-ICALEPCS2021-WEPV023
[n] J. L. Erickson and R. W. Garnett, “Status of the Los Alamos Multi-Probe Facility for Matter-Radiation Interactions in Extremes”, in Proc. NAPAC'16, Chicago, IL, USA, Oct. 2016, pp. 464-468. doi:10.18429/JACoW-NAPAC2016-TUB4IO01
[n] T. A. Antaya, H. G. Blosser, and R. J. Burleigh, “Current Status of the ECR Ion Source Project at NSCL”, in Proc. Cyclotrons'84, East Lansing, MI, USA, Apr.-May 1984, paper B48, pp. 184-187.
[n] P. Lee et al., “Development of Physical Processes in Geant4 for Simulation of ISOL Target-Ion-Source System”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1724-1726. doi:10.18429/JACoW-IPAC2018-TUPML077
[n] Z. Xue, J. P. Dai, L. Cheng, and Y. Yang, “Preliminary Hardware Implementation of Compensation Mechanism of Superconducting Cavity Failure in C-ADS Linac”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 953-955. doi:10.18429/JACoW-IPAC2015-MOPTY008
[n] G. Favia et al., “Performance improvement studies for the CERN SPS MKDH system”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 474-477. doi:10.18429/JACoW-IPAC2025-MOPM066
[n] A. Mosnier, S. Chel, B. Phung Ngoc, and J. M. Tessier, “RF Control System for the SC Cavity of the Tesla Test Facility Injector”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 4P053, pp. 2311-2313.
[n] I. M. Kapchinskiy et al., “RF Linac for Heavy Ion Fusion Driver”, in Proc. LINAC'86, Stanford, CA, USA, Sep. 1986, paper WE3-29, pp. 318-322.
[n] S. Shen, K. Kishiyama, J. M. Parker, N. G. Wilson, and D. Schrage, “APT/LEDA RFQ Vacuum Pumping System”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 4P017, pp. 3625-3627.
[n] G. Burtin et al., “Mechanical Design, Signal Processing and Operator Interface of the LEP Beam Current Transformers”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 794-797.
[n] T. Lefevre, H.-H. Braun, R. Corsini, M. Gasior, M. Velasco, and M. Wood, “Beam Loss Monitoring on the CLIC Test Facility 3”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper THPLT148, pp. 2804-2806.
[n] D. Rees, J. L. Erickson, R. W. Garnett, J. T. M. Lyles, and L. Rybarcyk, “LANSCE RF System Improvements for Current and Future Programs”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPC068, pp. 238-240.
[n] A. E. Pollard, D. J. Dunning, and M. Maheshwari, “Learning to Lase: Machine Learning Prediction of FEL Beam Properties”, in Proc. ICALEPCS'21, Shanghai, China, Oct. 2021, pp. 677-680. doi:10.18429/JACoW-ICALEPCS2021-WEPV020
[n] D. Churanov et al., “RELUS-5 ELECTRON LINAC START-UP”, in Proc. RuPAC'08, Zvenigorod, Russia, Sep.-Oct. 2008, paper TUAPH05, pp. XX-XX.
[n] G. A. Naylor, E. Plouviez, and G. F. Penacoba European Synchrotron Radiation Facility, “Beam Position And Phase Measurements Using A FPGA For The Processing Of The Pick-Ups Signals”, in Proc. DIPAC'03, Mainz, Germany, May 2003, paper PT01, pp. XX-XX.
[n] M. Peryt, M. Hrabia, D. Noll, and R. Scrivens, “The Linac4 Source Autopilot”, in Proc. ICALEPCS'21, Shanghai, China, Oct. 2021, pp. 665-670. doi:10.18429/JACoW-ICALEPCS2021-WEPV018
[n] D. Churanov, A. Krasnov, M. Urbant, A. Zavadtsev, and D. Zavadtsev, “SOLID STATE MODULATOR FOR LINEAR ACCELERATORS”, in Proc. RuPAC'08, Zvenigorod, Russia, Sep.-Oct. 2008, paper TUCPH11, pp. XX-XX.
[n] S. Schreiber et al., “Improved Operation of the TTF Photoinjector for FEL Operation”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUPRI052, pp. 1804-1806.
[n] L. Cultrera et al., “Photocathode Growth and Characterization Advances at Cornell University”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 3990-3992. doi:10.18429/JACoW-IPAC2016-THPOW025
For LaTeX
Use Complete Form
For BibTeX
References
- A. M. Ghaith et al., “Progress of Pr2Fe14B Based Hybrid Cryogenic Undulators at SOLEIL”, in Proc. 8th Int. Particle Accelerator Conf. (IPAC'17), Copenhagen, Denmark, May 2017, pp. 1213-1216.
- A. A. Zavadtsev, D. Churanov, D. A. Zavadtsev, and D. A. Zybin, “Solid-State Modulators for Particle Accelerators”, in Proc. 25th Russian Particle Accelerator Conf. (RuPAC'16), Saint Petersburg, Russia, Nov. 2016, pp. 600-602.
- L. Yan and Z. Liu, “Coherent synchrotron radiation instability in steady-state microbunching ring”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper WEPS004, unpublished.
- R. Sundelin, “Superconducting RF Activities at Cornell University”, in Proc. 2nd Int. Conf. RF Superconductivity (SRF'84), Geneva, Switzerland, Jul. 1984, paper SRF84-3, pp. XX-XX.
- Y. Jongen, G. A. Karamysheva, N. A. Morozov, E. Samsonov, D. Vandeplassche, and S. E. Zaremba, “Computer Modeling of Magnetic System for C400 Superconducting Cyclotron”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper WEPLS092, pp. 2589-2591.
- H. Huang, P. Adams, E. C. Aschenauer, A. Poblaguev, and W. B. Schmidke, “Analysis of Polarization Decay at RHIC Store”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 76-78.
- J. Fern?índez et al., “Status of the uTCA Digital LLRF design for SARAF Phase II”, in Proc. 18th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'21), Shanghai, China, Oct. 2021, pp. 720-723.
- Q. Wu, S. U. De Silva, Y. Luo, J. A. Mitchell, and B. P. Xiao, “EIC Crab Cavity Multipole Analysis”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 2589-2591.
- Z. Liu, H. Deng, Z. Jiang, X. Li, H. Qian, and G. Shu, “The correction of beam trajectory for low energy injector”, presented at the 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper MOPS026, unpublished.
- A. S. Alexandrova and C. P. Welsch, “Laser Diode Velocimeter-Monitor Based on Self-Mixing Technique”, in Proc. 2nd Int. Beam Instrumentation Conf. (IBIC'13), Oxford, UK, Sep. 2013, paper MOPF03, pp. 200-203.
- V. L. Allan, G. Brajnik, and L. R. Brederode, “Using BDD Testing in SKAO: Challenges and Opportunities”, in Proc. 19th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'23), Cape Town, South Africa, Oct. 2023, paper MO4BCO01, pp. 183-190.
- J. M. Baze, P. Bernard, M. Feldmann, and C. Lecoeur, “The Vacuum Chamber of the GANIL SSC”, in Proc. 8th Int. Cyclotron Conf. and Their Applications (Cyclotrons'78), Bloomington, IN, USA, Sep. 1978, paper A-14, pp. 1938-1939.
- K. J. Kugler, W. Paul, and U. Trinks, “A Superconducting Storage Ring for Very Slow Neutrons”, in Proc. 8th Particle Accelerator Conf. (PAC'79), San Francisco, CA, USA, Mar. 1979, pp. 3152-3155.
- A. E. Pollard, D. J. Dunning, and A. J. Gilfellon, “Machine Learning for RF Breakdown Detection at CLARA”, in Proc. 18th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'21), Shanghai, China, Oct. 2021, pp. 681-685.
- R. Doelling, P. Grobeta, H. Klein, J. Pozimski, and K. Reidelbach, “Plasma Potential and Temperature Measurements of a Thin Plasma by use of Langmuir-Probes”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 1755-1758.
- P. Adams, N. A. Kling, C. Liu, and G. J. Marr, “Use of the Base-Band Tune Meter Kickers During the FY18 STAR Fixed Target Run at 3.85 GeV/u”, in Proc. North American Particle Accelerator Conf. (NAPAC'19), Lansing, MI, USA, Sep. 2019, pp. 820-822.
- J. H. Kelly, “Experimental Modal Analysis Vibration Measurement to Inform Engineering Design”, in Proc. 10th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'18), Paris, France, Jun. 2018, pp. 235-237.
- V. Rieker, J. J. Bateman, R. Corsini, L. A. Dyks, W. Farabolini, and P. Korysko, “VHEE High Dose Rate Dosimetry Studies in CLEAR”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 3026-3029.
- H.-C. Hseuh, P. He, and R. J. Todd, “Metallization of SNS Ring Injection Kicker Ceramic Vacuum Chambers”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper WEPDO037, pp. 2556-2558.
- P. Bado, M. Dugan, A. A. Said, K. J. Suthar, A. Zholents, and A. E. Siy, “Fabrication of the Transition Section of a Corrugated Wakefield Accelerator via Laser Micromachining”, in Proc. 11th Mechanical Engineering Design of Synchrotron Radiation Equipment and Instrumentation Conf. (MEDSI'20), Chicago, USA, Jul. 2021, pp. 175.
- E. Hamwi, G. Hoffstaetter, V. Schoefer, and W. Lin, “Comprehensive modeling of Siberian Snakes in BNL’s AGS: symplectic tracking and optical compensation”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper MOPS03, pp. 686-689.
- M. M. Donatti, D. H. C. Araujo, F. H. Cardoso, G. B. Z. L, L. Sanfelici, and G. T. Semissatto, “Multi-Channel Heaters Driver for Sirius Beamline's Optical Devices”, in Proc. 18th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'21), Shanghai, China, Oct. 2021, pp. 705-709.
- P. A. Arrutia Sota, P. Burrows, H. Damerau, M. A. Fraser, M. Vadai, and F. M. Velotti, “Implementation of RF Channeling at the CERN PS for Spill Quality Improvements”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 2114-2117.
- P. Pizzol et al., “Progress of MgB2 Deposition Technique for SRF Cavities at LANL”, in Proc. 20th International Conference on RF Superconductivity (SRF'21), East Lansing, MI, USA, Jun.-Jul. 2021, pp. 482.
- I. Lobach, S. Nagaitsev, E. G. Stern, and T. Zolkin, “McMillan Lens in a System with Space Charge”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3143-3145.
- M. P. McCarthy et al., “Spallation Neutron Source High Power RF Installation and Commissioning Progress”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper WPAT061, pp. 3520-3522.
- P. I. Gladkikh et al., “PSR-2000. Beam Extraction to SP-103”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 1495-1498.
- D. T. Abell, J. P. Edelen, B. G. Freeman, R. Kazimi, D. G. Moser, and C. Tennant, “Development of a Smart Alarm System for the CEBAF Injector”, in Proc. 18th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'21), Shanghai, China, Oct. 2021, pp. 691-694.
- J. L. Erickson and R. W. Garnett, “Status of the Los Alamos Multi-Probe Facility for Matter-Radiation Interactions in Extremes”, in Proc. North American Particle Accelerator Conf. (NAPAC'16), Chicago, IL, USA, Oct. 2016, pp. 464-468.
- T. A. Antaya, H. G. Blosser, and R. J. Burleigh, “Current Status of the ECR Ion Source Project at NSCL”, in Proc. 10th Int. Cyclotron Conf. and Their Applications (Cyclotrons'84), East Lansing, MI, USA, Apr.-May 1984, paper B48, pp. 184-187.
- P. Lee et al., “Development of Physical Processes in Geant4 for Simulation of ISOL Target-Ion-Source System”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 1724-1726.
- Z. Xue, J. P. Dai, L. Cheng, and Y. Yang, “Preliminary Hardware Implementation of Compensation Mechanism of Superconducting Cavity Failure in C-ADS Linac”, in Proc. 6th Int. Particle Accelerator Conf. (IPAC'15), Richmond, VA, USA, May 2015, pp. 953-955.
- G. Favia et al., “Performance improvement studies for the CERN SPS MKDH system”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper MOPM066, pp. 474-477.
- A. Mosnier, S. Chel, B. Phung Ngoc, and J. M. Tessier, “RF Control System for the SC Cavity of the Tesla Test Facility Injector”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 4P053, pp. 2311-2313.
- I. M. Kapchinskiy et al., “RF Linac for Heavy Ion Fusion Driver”, in Proc. 1986 Linear Accelerator Conf. (LINAC'86), Stanford, CA, USA, Jun. 1986, paper WE3-29, pp. 318-322.
- S. Shen, K. Kishiyama, J. M. Parker, N. G. Wilson, and D. Schrage, “APT/LEDA RFQ Vacuum Pumping System”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 4P017, pp. 3625-3627.
- G. Burtin et al., “Mechanical Design, Signal Processing and Operator Interface of the LEP Beam Current Transformers”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 794-797.
- T. Lefevre, H.-H. Braun, R. Corsini, M. Gasior, M. Velasco, and M. Wood, “Beam Loss Monitoring on the CLIC Test Facility 3”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper THPLT148, pp. 2804-2806.
- D. Rees, J. L. Erickson, R. W. Garnett, J. T. M. Lyles, and L. Rybarcyk, “LANSCE RF System Improvements for Current and Future Programs”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper MOPC068, pp. 238-240.
- A. E. Pollard, D. J. Dunning, and M. Maheshwari, “Learning to Lase: Machine Learning Prediction of FEL Beam Properties”, in Proc. 18th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'21), Shanghai, China, Oct. 2021, pp. 677-680.
- D. Churanov et al., “RELUS-5 ELECTRON LINAC START-UP”, in Proc. 21st Russian Particle Accelerator Conf. (RuPAC'08), Zvenigorod, Russia, Sep.-Oct. 2008, paper TUAPH05, pp. XX-XX.
- G. A. Naylor, E. Plouviez, and G. F. Penacoba European Synchrotron Radiation Facility, “Beam Position And Phase Measurements Using A FPGA For The Processing Of The Pick-Ups Signals”, in Proc. 6th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'03), Mainz, Germany, May 2003, paper PT01, pp. XX-XX.
- M. Peryt, M. Hrabia, D. Noll, and R. Scrivens, “The Linac4 Source Autopilot”, in Proc. 18th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'21), Shanghai, China, Oct. 2021, pp. 665-670.
- D. Churanov, A. Krasnov, M. Urbant, A. Zavadtsev, and D. Zavadtsev, “SOLID STATE MODULATOR FOR LINEAR ACCELERATORS”, in Proc. 21st Russian Particle Accelerator Conf. (RuPAC'08), Zvenigorod, Russia, Sep.-Oct. 2008, paper TUCPH11, pp. XX-XX.
- S. Schreiber et al., “Improved Operation of the TTF Photoinjector for FEL Operation”, in Proc. 8th European Particle Accelerator Conf. (EPAC'02), Paris, France, Jun. 2002, paper TUPRI052, pp. 1804-1806.
- L. Cultrera et al., “Photocathode Growth and Characterization Advances at Cornell University”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 3990-3992.
Back to search