Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] K. Y. Ng and R. Warnock, “Longitudinal Impedance of a Smooth Toroidal Chamber at Low and Intermediate Frequencies”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 798-800.
[n] J. Zhao et al., “The BEPC Control System Upgraded”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPA01, pp. 2193-2195.
[n] S. Aumon et al., “Transverse Mode Coupling Instability Measurements at Transition Crossing in the CERN PS”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPD049, pp. 2036-2038.
[n] D. M. Haider et al., “Beam Intensity Monitoring with nA Resolution - the Cryogenic Current Comparator (CCC)”, in Proc. IBIC'18, Shanghai, China, Sep. 2018, pp. 130-133. doi:10.18429/JACoW-IBIC2018-MOPC08
[n] C. Tennant, D. Douglas, K. Jordan, L. Merminga, E. Pozdeyev, and T. I. Smith, “Suppression of Multipass, Multibunch Beam Breakup in Two Pass Recirculating Accelerators”, in Proc. FEL'04, Trieste, Italy, Aug.-Sep. 2004, paper WEBOS03, pp. XX-XX.
[n] P. Bowe et al., “Limits to Bunched Beam Laser Cooling”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper THP21F, pp. 1043-1045.
[n] M. Grieser et al., “Status of the REX-ISOLDE Project”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper WEA30, pp. 1955-1957.
[n] R. Assmann et al., “Design Status of the CLIC 3-TeV Beam Delivery System and Damping Rings”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper THP2A20, pp. 522-526.
[n] S. Xu, X. Kong, Q. Le, and J. Zhao, “Applications of CANbus and ControlNet in EPICS System of BEPCII”, in Proc. ICALEPCS'03, Gyeongju, Korea, Oct. 2003, paper WP558, pp. XX-XX.
[n] T. Tsang and D. M. Gassner, “Residual Gas Fluorescence Monitor at RHIC”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOP210, pp. 492-494.
[n] K. A. Dewhurst et al., “Design of the Cockcroft Beamline: Adjustable Transport of Laser Wakefield Electrons to an Undulator”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3749-3752. doi:10.18429/JACoW-IPAC2019-THPGW070
[n] N. Hosoda, H. Maesaka, T. Ohata, T. Ohshima, and Y. Otake, “SCSS Prototype Accelerator Timing System”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper TUPMA035, pp. 154-156.
[n] S. Cohen, S. R. Babel, D. A. Bonal, J. D. Gilpatrick, M. M. Ravindran, and J. D. Sedillo, “Closed Loop Wire Scanner Actuator Control for LANSCE Accelerator Beam Profile Measurements”, in Proc. BIW'08, Lake Tahoe, CA, USA, May 2008, paper TUPTPF056, pp. 244-246.
[n] Y. Y. Lee, M. Blaskiewicz, A. Fedotov, D. Raparia, J. Beebe-Wang, and W. T. Weng and J, “Linac Energy Manipulation for Longitudinal Phase Space Painting for SNS Ring”, in Proc. LINAC'02, Gyeongju, Korea, Aug. 2002, paper MO413, pp. 67-69.
[n] Y. Papaphilippou, G. Chazot, J. M. Koch, E. Plouviez, J. L. Revol, and A. Ropert, “Chromaticity Measurements in the ESRF Booster”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper MPPB012, pp. 851-853.
[n] K. Sato et al., “Status Report on HIMAC”, in Proc. EPAC'94, London, UK, Jun.-Jul. 1994, pp. 412-417.
[n] J.-I. Odagiri et al., “Application of EPICS on F3RP61 to Accelerator Control”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper THD005, pp. 916-918.
[n] A. J. Moss, S. A. Griffiths, and R. J. Smith, “Upgrade of the SRS Klystron Power Supply”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper FPAH008, pp. 3675-3677.
[n] W. H?Âfle, “Status and Prospects in Fast Beam-Based Feedbacks”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 3112-3117. doi:10.18429/JACoW-IPAC2022-FRIXGD1
For LaTeX
Use Complete Form
For BibTeX
References
- K. Y. Ng and R. Warnock, “Longitudinal Impedance of a Smooth Toroidal Chamber at Low and Intermediate Frequencies”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 798-800.
- J. Zhao et al., “The BEPC Control System Upgraded”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper MPA01, pp. 2193-2195.
- S. Aumon et al., “Transverse Mode Coupling Instability Measurements at Transition Crossing in the CERN PS”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPD049, pp. 2036-2038.
- D. M. Haider et al., “Beam Intensity Monitoring with nA Resolution - the Cryogenic Current Comparator (CCC)”, in Proc. 7th Int. Beam Instrumentation Conf. (IBIC'18), Shanghai, China, Sep. 2018, pp. 130-133.
- C. Tennant, D. Douglas, K. Jordan, L. Merminga, E. Pozdeyev, and T. I. Smith, “Suppression of Multipass, Multibunch Beam Breakup in Two Pass Recirculating Accelerators”, in Proc. 26th Int. Free Electron Laser Conf. & 11th FEL Users Workshop (FEL'04), Trieste, Italy, Aug.-Sep. 2004, paper WEBOS03, pp. XX-XX.
- P. Bowe et al., “Limits to Bunched Beam Laser Cooling”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper THP21F, pp. 1043-1045.
- M. Grieser et al., “Status of the REX-ISOLDE Project”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper WEA30, pp. 1955-1957.
- R. Assmann et al., “Design Status of the CLIC 3-TeV Beam Delivery System and Damping Rings”, in Proc. 7th European Particle Accelerator Conf. (EPAC'00), Vienna, Austria, Jun. 2000, paper THP2A20, pp. 522-526.
- S. Xu, X. Kong, Q. Le, and J. Zhao, “Applications of CANbus and ControlNet in EPICS System of BEPCII”, in Proc. 9th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'03), Gyeongju, Korea, Oct. 2003, paper WP558, pp. XX-XX.
- T. Tsang and D. M. Gassner, “Residual Gas Fluorescence Monitor at RHIC”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper MOP210, pp. 492-494.
- K. A. Dewhurst et al., “Design of the Cockcroft Beamline: Adjustable Transport of Laser Wakefield Electrons to an Undulator”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 3749-3752.
- N. Hosoda, H. Maesaka, T. Ohata, T. Ohshima, and Y. Otake, “SCSS Prototype Accelerator Timing System”, in Proc. 4th Asian Particle Accelerator Conf. (APAC'07), Indore, India, Jan.-Feb. 2007, paper TUPMA035, pp. 154-156.
- S. Cohen, S. R. Babel, D. A. Bonal, J. D. Gilpatrick, M. M. Ravindran, and J. D. Sedillo, “Closed Loop Wire Scanner Actuator Control for LANSCE Accelerator Beam Profile Measurements”, in Proc. 13th Beam Instrumentation Workshop (BIW'08), Lake Tahoe, CA, USA, May 2008, paper TUPTPF056, pp. 244-246.
- Y. Y. Lee, M. Blaskiewicz, A. Fedotov, D. Raparia, J. Beebe-Wang, and W. T. Weng and J, “Linac Energy Manipulation for Longitudinal Phase Space Painting for SNS Ring”, in Proc. 21st Linear Accelerator Conf. (LINAC'02), Gyeongju, Korea, Aug. 2002, paper MO413, pp. 67-69.
- Y. Papaphilippou, G. Chazot, J. M. Koch, E. Plouviez, J. L. Revol, and A. Ropert, “Chromaticity Measurements in the ESRF Booster”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper MPPB012, pp. 851-853.
- K. Sato et al., “Status Report on HIMAC”, in Proc. 4th European Particle Accelerator Conf. (EPAC'94), London, UK, Jun.-Jul. 1994, pp. 412-417.
- J.-I. Odagiri et al., “Application of EPICS on F3RP61 to Accelerator Control”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper THD005, pp. 916-918.
- A. J. Moss, S. A. Griffiths, and R. J. Smith, “Upgrade of the SRS Klystron Power Supply”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper FPAH008, pp. 3675-3677.
- W. H?Âfle, “Status and Prospects in Fast Beam-Based Feedbacks”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 3112-3117.
Back to search