Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] C. J. Herrlander, K.-G. Rensfelt, and J. Starker, “CRYRING - A Heavy-Ion Storage and Synchrotron Ring”, in Proc. EPAC'88, Rome, Italy, Jun. 1988, pp. 350-353.
[n] C. Nieter and J. R. Cary, “VORPAL - A Multidimensional Code for Simulating Advanced Acceleration Concepts”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPAH110, pp. 3105-3107.
[n] Yu. D. Kliuchevskaia and S. M. Polozov, “Optimization of the RF-Gun With Photocathode at Operating Frequency 2800 MHz for the New Injection Linac for USSR Project”, in Proc. RuPAC2021, Alushta, Crimea, Sep.-Oct. 2021, pp. 319-321. doi:10.18429/JACoW-RuPAC2021-TUPSB43
[n] I. Hofmann, “Revisiting the Longitudinal 90 Degree Limit for Superconducting Linear Accelerators”, in Proc. HB'18, Daejeon, Korea, Jun. 2018, pp. 369-372. doi:10.18429/JACoW-HB2018-THP2WB01
[n] V. A. Azhippo et al., “Operation of a 300 MeV Electron Linac in the Short-Beam Mode”, in Proc. LINAC'86, Stanford, CA, USA, Sep. 1986, paper TH3-49, pp. 563-565.
[n] S. Peggs and V. Mane, “KRAKEN, a Numerical Model of RHIC Impedances”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WAC26, pp. 3137-3139.
[n] S. Assadi, “SNS Transverse and Longitudinal Laser Profile Monitors Design, Implementation and Results”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPCH156, pp. 3161-3163.
[n] Y. Jongen and G. Ryckewaert, “An Injector Cyclotron for Cyclone”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1732-1736.
[n] S. Zhang, “Implementing Distributed Technology on BESIII Slow Control System”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper THP102, pp. XX-XX.
[n] P. Fritschel et al., “Readout and Control of a Power-Recycled Interferometric Gravitational Wave Antenna”, in Proc. ICALEPCS'01, San Jose, CA, USA, Nov. 2001, paper WECT003, pp. XX-XX.
[n] S. V. Kuzikov, S. P. Antipov, A. Liu, A. V. Savilov, and A. A. Vikharev, “Tapered Flying Radiofrequency Undulator”, in Proc. FEL'17, Santa Fe, NM, USA, Aug. 2017, pp. 525-528. doi:10.18429/JACoW-FEL2017-WEP055
[n] E. Plouviez European Synchrotron Radiation Facility, “Microwave Pickups for the Observation of Multi GHz Signals Induced by the ESRF Storage Ring Electron Bunches”, in Proc. DIPAC'01, Grenoble, France, May 2001, paper PS14, pp. XX-XX.
[n] G. Ribeiro, G. Arabidze, P. Lafarguette, and S. Nemecek, “The ATLAS Tile Calorimeter Detector Control System”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEPMN023, pp. 929-931.
[n] S. J. Mills, F. M. Nortier, H. A. Smit, G. F. Steyn, and W. L. Rautenbach, “A Multi-Purpose Target Station for Radioisotope Production at Medium Energies”, in Proc. Cyclotrons'89, Berlin, Germany, May 1989, paper H-06, pp. 527-530.
[n] I. B. Enchevich, M. J. Barnes, and R. L. Poirier, “Analysis of Eddy Currents in the Walls of the Ferrite Tuned rf Cavity for the TRIUMF Kaon Factory Booster Synchrotron”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 699-702.
[n] K. H?Âppner et al., “Development of a Web-based Shift Reporting Tool for Accelerator Operation at the Heidelberg Ion Beam Therapy Center”, in Proc. ICALEPCS'13, San Francisco, CA, USA, Oct. 2013, paper TUPPC106, pp. 822-824.
[n] A. S. Chikhachev and H. Y. Barminova, “About Behavior of Electrons and Ions in the Accelerating Interval”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 372-373. doi:10.18429/JACoW-RUPAC2016-WEPSB008
[n] Y. Yano, “RIKEN RI Beam Factory Project”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper ROPC003, pp. 320-324.
[n] B. Kriegbaum and F. Pedersen, “Electronics for the Longitudinal Active Damping System for the CERN PS Booster”, in Proc. PAC'77, Chicago, IL, USA, Mar. 1977, pp. 1695-1698.
[n] I. V. Rybakov and I. I. Isaev, “Estimation of Multipacting in CDS Structure”, in Proc. RuPAC'16, Saint Petersburg, Russia, Nov. 2016, pp. 288-290. doi:10.18429/JACoW-RUPAC2016-TUPSA035
[n] H. N. Jungwirth and J. G. de Villiers, “A New Design Proposal for a 200 MeV Superconducting Ring-Cyclotron Magnet”, in Proc. Cyclotrons'92, Vancouver, Canada, Jul. 1992, paper XII-04, pp. 709-712.
[n] A. Markovik, K. Floettmann, G. P?Âplau, and U. van Rienen, “Simulation of 3D Space-charge Fields of Bunches in a Beam Pipe of Elliptical Shape”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper WEPCH120, pp. 2200-2202.
[n] V. Maradia, A. L. Lomax, D. Meer, S. Psoroulas, and D. C. Weber, “A Novel Intensity Compensation Method to Achieve Energy Independent Beam Intensity at the Patient Location for Cyclotron Based Proton Therapy Facilities”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 3004-3006. doi:10.18429/JACoW-IPAC2022-THPOMS024
For LaTeX
Use Complete Form
For BibTeX
References
- C. J. Herrlander, K.-G. Rensfelt, and J. Starker, “CRYRING - A Heavy-Ion Storage and Synchrotron Ring”, in Proc. 1st European Particle Accelerator Conf. (EPAC'88), Rome, Italy, Jun. 1988, pp. 350-353.
- C. Nieter and J. R. Cary, “VORPAL - A Multidimensional Code for Simulating Advanced Acceleration Concepts”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPAH110, pp. 3105-3107.
- Yu. D. Kliuchevskaia and S. M. Polozov, “Optimization of the RF-Gun With Photocathode at Operating Frequency 2800 MHz for the New Injection Linac for USSR Project”, in Proc. 27th Russian Particle Accelerator Conference (RuPAC2021), Alushta, Crimea, Sep.-Oct. 2021, pp. 319-321.
- I. Hofmann, “Revisiting the Longitudinal 90 Degree Limit for Superconducting Linear Accelerators”, in Proc. 61st ICFA Advanced Beam Dynamics Workshop on High-Intensity and High-Brightness Hadron Beams (HB'18), Daejeon, Korea, Jun. 2018, pp. 369-372.
- V. A. Azhippo et al., “Operation of a 300 MeV Electron Linac in the Short-Beam Mode”, in Proc. 1986 Linear Accelerator Conf. (LINAC'86), Stanford, CA, USA, Jun. 1986, paper TH3-49, pp. 563-565.
- S. Peggs and V. Mane, “KRAKEN, a Numerical Model of RHIC Impedances”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper WAC26, pp. 3137-3139.
- S. Assadi, “SNS Transverse and Longitudinal Laser Profile Monitors Design, Implementation and Results”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THPCH156, pp. 3161-3163.
- Y. Jongen and G. Ryckewaert, “An Injector Cyclotron for Cyclone”, in Proc. 6th Particle Accelerator Conf. (PAC'75), Washington D.C., USA, Mar. 1975, pp. 1732-1736.
- S. Zhang, “Implementing Distributed Technology on BESIII Slow Control System”, in Proc. 12th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'09), Kobe, Japan, Oct. 2009, paper THP102, pp. XX-XX.
- P. Fritschel et al., “Readout and Control of a Power-Recycled Interferometric Gravitational Wave Antenna”, in Proc. 8th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'01), San Jose, CA, USA, Nov. 2001, paper WECT003, pp. XX-XX.
- S. V. Kuzikov, S. P. Antipov, A. Liu, A. V. Savilov, and A. A. Vikharev, “Tapered Flying Radiofrequency Undulator”, in Proc. 38th Int. Free Electron Laser Conf. (FEL'17), Santa Fe, NM, USA, Aug. 2017, pp. 525-528.
- E. Plouviez European Synchrotron Radiation Facility, “Microwave Pickups for the Observation of Multi GHz Signals Induced by the ESRF Storage Ring Electron Bunches”, in Proc. 5th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'01), Grenoble, France, May 2001, paper PS14, pp. XX-XX.
- G. Ribeiro, G. Arabidze, P. Lafarguette, and S. Nemecek, “The ATLAS Tile Calorimeter Detector Control System”, in Proc. 13th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'11), Grenoble, France, Oct. 2011, paper WEPMN023, pp. 929-931.
- S. J. Mills, F. M. Nortier, H. A. Smit, G. F. Steyn, and W. L. Rautenbach, “A Multi-Purpose Target Station for Radioisotope Production at Medium Energies”, in Proc. 12th Int. Cyclotron Conf. and Their Applications (Cyclotrons'89), Berlin, Germany, May 1989, paper H-06, pp. 527-530.
- I. B. Enchevich, M. J. Barnes, and R. L. Poirier, “Analysis of Eddy Currents in the Walls of the Ferrite Tuned rf Cavity for the TRIUMF Kaon Factory Booster Synchrotron”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 699-702.
- K. H?Âppner et al., “Development of a Web-based Shift Reporting Tool for Accelerator Operation at the Heidelberg Ion Beam Therapy Center”, in Proc. 14th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'13), San Francisco, CA, USA, Oct. 2013, paper TUPPC106, pp. 822-824.
- A. S. Chikhachev and H. Y. Barminova, “About Behavior of Electrons and Ions in the Accelerating Interval”, in Proc. 25th Russian Particle Accelerator Conf. (RuPAC'16), Saint Petersburg, Russia, Nov. 2016, pp. 372-373.
- Y. Yano, “RIKEN RI Beam Factory Project”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper ROPC003, pp. 320-324.
- B. Kriegbaum and F. Pedersen, “Electronics for the Longitudinal Active Damping System for the CERN PS Booster”, in Proc. 7th Particle Accelerator Conf. (PAC'77), Chicago, IL, USA, Mar. 1977, pp. 1695-1698.
- I. V. Rybakov and I. I. Isaev, “Estimation of Multipacting in CDS Structure”, in Proc. 25th Russian Particle Accelerator Conf. (RuPAC'16), Saint Petersburg, Russia, Nov. 2016, pp. 288-290.
- H. N. Jungwirth and J. G. de Villiers, “A New Design Proposal for a 200 MeV Superconducting Ring-Cyclotron Magnet”, in Proc. 13th Int. Cyclotron Conf. and Their Applications (Cyclotrons'92), Vancouver, Canada, Jul. 1992, paper XII-04, pp. 709-712.
- A. Markovik, K. Floettmann, G. P?Âplau, and U. van Rienen, “Simulation of 3D Space-charge Fields of Bunches in a Beam Pipe of Elliptical Shape”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper WEPCH120, pp. 2200-2202.
- V. Maradia, A. L. Lomax, D. Meer, S. Psoroulas, and D. C. Weber, “A Novel Intensity Compensation Method to Achieve Energy Independent Beam Intensity at the Patient Location for Cyclotron Based Proton Therapy Facilities”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 3004-3006.
Back to search