Warning
Some papers titles are all uppercase, you must correct this before using this reference.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] Y. Ma, B. Liu, Z. Zhang, and B. Wu, “Adjustment and Measurement of a Hybrid Undulator”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1611-1614.
[n] V. Conforti et al., “The small size telescope control system design of the Cherenkov Telescope Array Observatory”, in Proc. ICALEPCS'25, Chicago, IL, USA, Sep. 2025, pp. 222-228. doi:10.18429/JACoW-ICALEPCS2025-TUAG002
[n] L. Celona et al., “Status of the AISHa Ion Source at INFN-LNS”, in Proc. ECRIS'20, East Lansing, MI, USA, Sep. 2020, pp. 10-12. doi:10.18429/JACoW-ECRIS2020-MOWZO03
[n] P. Andreu Mu??oz et al., “Irradiation of Low-Z Carbon-Based Materials with 440 GeV/c Proton Beam for High Energy & Intensity Beam Absorbers: The CERN HiRadMat-56-HED Experiment”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 2883-2886. doi:10.18429/JACoW-IPAC2022-THPOTK049
[n] A. Giribono et al., “Recent experimental results on the particle driven acceleration at the SPARC_LAB test facility”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2038-2041. doi:10.18429/JACoW-IPAC2023-TUPL131
[n] R. Bodenstein et al., “Designing the spreaders and splitters for the FFA@CEBAF energy upgrade”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 965-968. doi:10.18429/JACoW-IPAC2023-MOPL183
[n] G. S. Mauro et al., “Electromagnetic Simulation of plasma-shaped" Plasma Chamber for Innovative ECRIS"”, in Proc. ECRIS'20, East Lansing, MI, USA, Sep. 2020, pp. 90-94. doi:10.18429/JACoW-ECRIS2020-TUYZO03
[n] J. Schaber et al., “Impact of Surface Cleaning on the Quantum Efficiency of Mg Photocathodes”, presented at the IPAC'23, Venice, Italy, May 2023, paper TUPA005, unpublished.
[n] T. B. Bolin, S. Biedron, and S. Sosa, “HPC Modeling of a High-Gradient C-Band Linac for Hard X-Ray Free-Electron Lasers”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 703-705. doi:10.18429/JACoW-IPAC2022-MOPOMS029
[n] S. Sosa, “Accelerators for Quantum Technologies”, presented at the NAPAC'22, Albuquerque, NM, USA, Aug. 2022, paper THXE3, unpublished.
[n] M. B. Andorf et al., “Characterization of Various GaN Samples for Photoinjectors”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 500-502. doi:10.18429/JACoW-IPAC2022-MOPOTK027
[n] A. Curcio, M. A. Knafel, G. W. Kowalski, R. Pana, M. Waniczek, and A. I. Wawrzyniak, “Bunch Length Characterizations for the Solaris Injector LINAC”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2117-2119. doi:10.18429/JACoW-IPAC2021-TUPAB277
[n] G. Spalek et al., “Studies of Coupled Cavity Linac (CCL) Accelerating Structures with 3-D Codes”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper THD18, pp. 950-952.
[n] Y. S. Cho, K. S. Kim, H. H. Lee, B. H. Choi, and J. M. Han, “LLRF SYSTEM FOR THE KTF RFQ LINAC”, in Proc. APAC'01, Beijing, China, Sep. 2001, paper TUP015, pp. XX-XX.
[n] Y. Chen and Z. Zhang, “Bunching Property of High Current Injector with Subharmonic Prebuncher in Linac”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 303-306.
[n] D. Dunning et al., “Conclusions from the UK XFEL conceptual design and options analysis study”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 157-160. doi:10.18429/JACoW-IPAC2025-MOPB042
[n] D. Wang et al., “Impedance analysis for the ALS-U kickers”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 1139-1142. doi:10.18429/JACoW-IPAC2025-TUPB090
[n] G. Romagnoli et al., “Engineering studies on collimators for CERN’s experimental areas”, presented at the IPAC'24, Nashville, TN, USA, May 2024, paper TUPR69, unpublished.
[n] S. Sosa et al., “Simulation of the LANSCE PSR injection and extraction beamlines”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3046-3048. doi:10.18429/JACoW-IPAC2024-THPC29
[n] H. Witte et al., “Progress on the design of the interaction region of the Electron-Ion Collider EIC”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 238-241. doi:10.18429/JACoW-IPAC2024-MOPC75
[n] P. Pacner, D. Belohrad, M. Martin Nieto, S. Mazzoni, and S. Bart Pedersen, “LHC abort gap monitor electronics upgrade”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1600-1603. doi:10.18429/JACoW-IPAC2024-TUPR78
[n] M. Tischer et al., “Magnetic Tuning and Installation Modifications of U48 Undulator for the Delhi Light Source (DLS)”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2918-2920. doi:10.18429/JACoW-IPAC2021-WEPAB131
[n] M. Jebramcik et al., “The latest design for a future short-baseline neutrino beamline”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 960-963. doi:10.18429/JACoW-IPAC2025-TUPB009
[n] S. Casalbuoni et al., “Towards a Superconducting Undulator Afterburner for the European XFEL”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2921-2924. doi:10.18429/JACoW-IPAC2021-WEPAB132
[n] R. Esposito et al., “Third-Generation CERN n_TOF Spallation Target: Final Design and Examinations of Irradiated Prototype”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 3555-3558. doi:10.18429/JACoW-IPAC2021-WEPAB364
[n] G. Geloni et al., “Status of the Hard X-Ray Self-Seeding Project at the European XFEL”, in Proc. FEL'17, Santa Fe, NM, USA, Aug. 2017, pp. 42-45. doi:10.18429/JACoW-FEL2017-MOP008
[n] K. Czuba et al., “Performance of Analog Signal Distribution in the ATCA Based LLRF System”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper MOP293, pp. 666-668.
[n] L. Crincoli et al., “Characterization of plasma-discharge capillaries for plasma-based particle acceleration”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1545-1548. doi:10.18429/JACoW-IPAC2023-TUPA097
[n] J. Szumega, B. Gkotse, P. Jouvelot, F. Ravotti, and L. bougueroua, “Machine learning for the anomaly detection and characterization of the 24 GeV/c proton beam at CERN IRRAD Facility”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 2917-2920. doi:10.18429/JACoW-IPAC2025-THPM110
[n] M. B. Andorf, J. Bae, A. C. Bartnik, I. V. Bazarov, L. Cultrera, and J. M. Maxson, “HERACLES: A High Average Current Electron Beamline for Lifetime Testing of Novel Photocathodes”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 3041-3044. doi:10.18429/JACoW-IPAC2022-THPOMS036
[n] D. Reschke et al., “Analysis of the RF Test Results from the On-going Accelerator Cavity Production for the European XFEL”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper THPP021, pp. 879-882.
[n] O. Belikov, V. Kozak, and A. Medvedko, “FOUR-QUADRANT POWER SUPPLIES FOR STEERING ELECTROMAGNETS FOR ELECTRON-POSITRON COLLIDERS”, in Proc. RuPAC'08, Zvenigorod, Russia, Sep.-Oct. 2008, paper WEBAU03, pp. XX-XX.
[n] S. U. De Silva, J. R. Delayen, V. S. Morozov, H. Park, and S. Sosa, “Analysis of Higher Order Multipoles of the 952.6 Mhz RF-Dipole Crabbing Cavity for the Jefferson Lab Electron-Ion Collider”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2996-2998. doi:10.18429/JACoW-IPAC2019-WEPRB076
[n] T. Xu et al., “Low-emittance SRF photo-injector prototype cryomodule for the LCLS-II high-energy upgrade: design and fabrication”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1396-1399. doi:10.18429/JACoW-IPAC2023-TUPA028
[n] T. Shea et al., “Commissioning of ESS normal-conducting linac instrumentation and implications for future hadron linacs”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 4665-4668. doi:10.18429/JACoW-IPAC2023-THPL091
For LaTeX
Use Complete Form
For BibTeX
References
- Y. Ma, B. Liu, Z. Zhang, and B. Wu, “Adjustment and Measurement of a Hybrid Undulator”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 1611-1614.
- V. Conforti et al., “The small size telescope control system design of the Cherenkov Telescope Array Observatory”, in Proc. 20th International Conference on Accelerator and Large Experimental Control Systems (ICALEPCS'25), Chicago, IL, USA, Sep. 2025, pp. 222-228.
- L. Celona et al., “Status of the AISHa Ion Source at INFN-LNS”, in Proc. 24th International Workshop on ECR Ion Sources (ECRIS'20), East Lansing, MI, USA, Sep. 2020, paper MOWZO03, pp. 10-12.
- P. Andreu Mu??oz et al., “Irradiation of Low-Z Carbon-Based Materials with 440 GeV/c Proton Beam for High Energy & Intensity Beam Absorbers: The CERN HiRadMat-56-HED Experiment”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 2883-2886.
- A. Giribono et al., “Recent experimental results on the particle driven acceleration at the SPARC_LAB test facility”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPL131, pp. 2038-2041.
- R. Bodenstein et al., “Designing the spreaders and splitters for the FFA@CEBAF energy upgrade”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPL183, pp. 965-968.
- G. S. Mauro et al., “Electromagnetic Simulation of plasma-shaped" Plasma Chamber for Innovative ECRIS"”, in Proc. 24th International Workshop on ECR Ion Sources (ECRIS'20), East Lansing, MI, USA, Sep. 2020, paper TUYZO03, pp. 90-94.
- J. Schaber et al., “Impact of Surface Cleaning on the Quantum Efficiency of Mg Photocathodes”, presented at the 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPA005, unpublished.
- T. B. Bolin, S. Biedron, and S. Sosa, “HPC Modeling of a High-Gradient C-Band Linac for Hard X-Ray Free-Electron Lasers”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 703-705.
- S. Sosa, “Accelerators for Quantum Technologies”, presented at the North American Particle Accelerator Conf. (NAPAC'22), Albuquerque, NM, USA, Aug. 2022, paper THXE3, unpublished.
- M. B. Andorf et al., “Characterization of Various GaN Samples for Photoinjectors”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 500-502.
- A. Curcio, M. A. Knafel, G. W. Kowalski, R. Pana, M. Waniczek, and A. I. Wawrzyniak, “Bunch Length Characterizations for the Solaris Injector LINAC”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 2117-2119.
- G. Spalek et al., “Studies of Coupled Cavity Linac (CCL) Accelerating Structures with 3-D Codes”, in Proc. 20th Linear Accelerator Conf. (LINAC'00), Monterey, CA, USA, Aug. 2000, paper THD18, pp. 950-952.
- Y. S. Cho, K. S. Kim, H. H. Lee, B. H. Choi, and J. M. Han, “LLRF SYSTEM FOR THE KTF RFQ LINAC”, in Proc. 2nd Asian Particle Accelerator Conf. (APAC'01), Beijing, China, Sep. 2001, paper TUP015, pp. XX-XX.
- Y. Chen and Z. Zhang, “Bunching Property of High Current Injector with Subharmonic Prebuncher in Linac”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 303-306.
- D. Dunning et al., “Conclusions from the UK XFEL conceptual design and options analysis study”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper MOPB042, pp. 157-160.
- D. Wang et al., “Impedance analysis for the ALS-U kickers”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper TUPB090, pp. 1139-1142.
- G. Romagnoli et al., “Engineering studies on collimators for CERN’s experimental areas”, presented at the 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPR69, unpublished.
- S. Sosa et al., “Simulation of the LANSCE PSR injection and extraction beamlines”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPC29, pp. 3046-3048.
- H. Witte et al., “Progress on the design of the interaction region of the Electron-Ion Collider EIC”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper MOPC75, pp. 238-241.
- P. Pacner, D. Belohrad, M. Martin Nieto, S. Mazzoni, and S. Bart Pedersen, “LHC abort gap monitor electronics upgrade”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPR78, pp. 1600-1603.
- M. Tischer et al., “Magnetic Tuning and Installation Modifications of U48 Undulator for the Delhi Light Source (DLS)”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 2918-2920.
- M. Jebramcik et al., “The latest design for a future short-baseline neutrino beamline”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper TUPB009, pp. 960-963.
- S. Casalbuoni et al., “Towards a Superconducting Undulator Afterburner for the European XFEL”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 2921-2924.
- R. Esposito et al., “Third-Generation CERN n_TOF Spallation Target: Final Design and Examinations of Irradiated Prototype”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 3555-3558.
- G. Geloni et al., “Status of the Hard X-Ray Self-Seeding Project at the European XFEL”, in Proc. 38th Int. Free Electron Laser Conf. (FEL'17), Santa Fe, NM, USA, Aug. 2017, pp. 42-45.
- K. Czuba et al., “Performance of Analog Signal Distribution in the ATCA Based LLRF System”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper MOP293, pp. 666-668.
- L. Crincoli et al., “Characterization of plasma-discharge capillaries for plasma-based particle acceleration”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPA097, pp. 1545-1548.
- J. Szumega, B. Gkotse, P. Jouvelot, F. Ravotti, and L. bougueroua, “Machine learning for the anomaly detection and characterization of the 24 GeV/c proton beam at CERN IRRAD Facility”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper THPM110, pp. 2917-2920.
- M. B. Andorf, J. Bae, A. C. Bartnik, I. V. Bazarov, L. Cultrera, and J. M. Maxson, “HERACLES: A High Average Current Electron Beamline for Lifetime Testing of Novel Photocathodes”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 3041-3044.
- D. Reschke et al., “Analysis of the RF Test Results from the On-going Accelerator Cavity Production for the European XFEL”, in Proc. 27th Linear Accelerator Conf. (LINAC'14), Geneva, Switzerland, Aug.-Sep. 2014, paper THPP021, pp. 879-882.
- O. Belikov, V. Kozak, and A. Medvedko, “FOUR-QUADRANT POWER SUPPLIES FOR STEERING ELECTROMAGNETS FOR ELECTRON-POSITRON COLLIDERS”, in Proc. 21st Russian Particle Accelerator Conf. (RuPAC'08), Zvenigorod, Russia, Sep.-Oct. 2008, paper WEBAU03, pp. XX-XX.
- S. U. De Silva, J. R. Delayen, V. S. Morozov, H. Park, and S. Sosa, “Analysis of Higher Order Multipoles of the 952.6 Mhz RF-Dipole Crabbing Cavity for the Jefferson Lab Electron-Ion Collider”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 2996-2998.
- T. Xu et al., “Low-emittance SRF photo-injector prototype cryomodule for the LCLS-II high-energy upgrade: design and fabrication”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPA028, pp. 1396-1399.
- T. Shea et al., “Commissioning of ESS normal-conducting linac instrumentation and implications for future hadron linacs”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper THPL091, pp. 4665-4668.
Back to search