Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] D. Bafia, A. Grassellino, and A. S. Romanenko, “The Role of Oxygen Concentration in Enabling High Gradients in Niobium SRF Cavities”, in Proc. SRF'21, East Lansing, MI, USA, Jun.-Jul. 2021, pp. 871. doi:10.18429/JACoW-SRF2021-THPTEV016
[n] A. Faugier et al., “The SPS as Accelerator of Pb82+ Ions”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WAP13, pp. 467-469.
[n] P. K. Kankiya, J. P. Jamilkowski, and A. Sukhanov, “Automated Testing and Validation of Control Parameters”, in Proc. ICALEPCS'19, New York, NY, USA, Oct. 2019, pp. XX-XX. doi:10.18429/JACoW-ICALEPCS2019-WECPR04
[n] D. J. Seal et al., “First RF Measurements of Planar SRF Thin Films with a High Throughput Test Facility at Daresbury Laboratory”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 1283-1286. doi:10.18429/JACoW-IPAC2022-TUPOTK033
[n] D. Shay, D. Craig, and F. DeFord, “Modeling of Switch Cores for Induction Accelerators”, in Proc. PAC'91, San Francisco, CA, USA, May 1991, pp. 3088-3091.
[n] M. Raskovic, L. Vuskovic, S. Popovic, A.-M. Valente-Feliciano, and L. Phillips, “Plasma Treatment of Bulk Nb Surface in the Ar/Cl2 Discharge”, in Proc. SRF'07, Beijing, China, Oct. 2007, paper TUP73, pp. XX-XX.
[n] R. J. Briggs, “Status of the SSC”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 3922-3926.
[n] M. Mayerhofer et al., “The potential of multi-material additive manufacturing illustrated by an RFQ prototype”, presented at the IPAC'26, Deauville, France, May 2026, paper MOV7004, unpublished.
[n] B. Podobedov and R. H. Siemann, “Signals from Microwave Unstable Beams in the SLC Damping Rings”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper TUBL8, pp. 146-148.
[n] H. J. Cha, N. Glamann, A. W. Grau, A.-S. M??ller, and D. Saez de Jauregui, “Fabrication of Robust Thermal Transition Modules and First Cryogenic Experiment with the Refurbished COLDDIAG”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 2505-2508. doi:10.18429/JACoW-IPAC2022-THPOST027
[n] C. Pereira Carlos et al., “HiPIMS Nb Thin Films for SRF Cavities”, presented at the IPAC'26, Deauville, France, May 2026, paper MOP7041, unpublished.
[n] L. Groening et al., “Status of the New Intense Heavy Ion DTL Project Alvarez 2.0 at GSI”, in Proc. LINAC'22, Liverpool, UK, Aug.-Sep. 2022, pp. 537-540. doi:10.18429/JACoW-LINAC2022-TUPOGE19
For LaTeX
Use Complete Form
For BibTeX
References
- D. Bafia, A. Grassellino, and A. S. Romanenko, “The Role of Oxygen Concentration in Enabling High Gradients in Niobium SRF Cavities”, in Proc. 20th International Conference on RF Superconductivity (SRF'21), East Lansing, MI, USA, Jun.-Jul. 2021, pp. 871.
- A. Faugier et al., “The SPS as Accelerator of Pb82+ Ions”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper WAP13, pp. 467-469.
- P. K. Kankiya, J. P. Jamilkowski, and A. Sukhanov, “Automated Testing and Validation of Control Parameters”, in Proc. 17th Int. Conf. on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'19), New York, NY, USA, Oct. 2019, pp. XX-XX.
- D. J. Seal et al., “First RF Measurements of Planar SRF Thin Films with a High Throughput Test Facility at Daresbury Laboratory”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 1283-1286.
- D. Shay, D. Craig, and F. DeFord, “Modeling of Switch Cores for Induction Accelerators”, in Proc. 14th Particle Accelerator Conf. (PAC'91), San Francisco, CA, USA, May 1991, pp. 3088-3091.
- M. Raskovic, L. Vuskovic, S. Popovic, A.-M. Valente-Feliciano, and L. Phillips, “Plasma Treatment of Bulk Nb Surface in the Ar/Cl2 Discharge”, in Proc. 13th Int. Conf. RF Superconductivity (SRF'07), Beijing, China, Oct. 2007, paper TUP73, pp. XX-XX.
- R. J. Briggs, “Status of the SSC”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 3922-3926.
- M. Mayerhofer et al., “The potential of multi-material additive manufacturing illustrated by an RFQ prototype”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper MOV7004, this conference.
- B. Podobedov and R. H. Siemann, “Signals from Microwave Unstable Beams in the SLC Damping Rings”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper TUBL8, pp. 146-148.
- H. J. Cha, N. Glamann, A. W. Grau, A.-S. M??ller, and D. Saez de Jauregui, “Fabrication of Robust Thermal Transition Modules and First Cryogenic Experiment with the Refurbished COLDDIAG”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 2505-2508.
- C. Pereira Carlos et al., “HiPIMS Nb Thin Films for SRF Cavities”, presented at the 17th Int. Particle Accelerator Conf. (IPAC'26), Deauville, France, May 2026, paper MOP7041, this conference.
- L. Groening et al., “Status of the New Intense Heavy Ion DTL Project Alvarez 2.0 at GSI”, in Proc. 31st Linear Accelerator Conf. (LINAC'22), Liverpool, UK, Aug.-Sep. 2022, pp. 537-540.
Back to search