Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] G. E. McMichael et al., “Exploring the Beam Parameter Space of a CW RFQ Proton Accelerator”, in Proc. PAC'89, Chicago, IL, USA, Mar. 1989, pp. 980-983.
[n] N. I. Balalykin and A. B. Kuznetsov, “Opportunity of Development of Niobium Coated Copper Cavity”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper TUP03K, pp. 1837-1839.
[n] G. X. Xia, “Ion Instability Study for the ILC 3 km Damping Ring”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEP103, pp. 1671-1673.
[n] K. Nakanishi et al., “KEKB/SuperKEKB Cryogenics Operation”, in Proc. eeFACT'18, Hong Kong, China, Sep. 2018, pp. 276. doi:10.18429/JACoW-eeFACT2018-WEPAB04
[n] C. N. Lehmann, M. P. Atkinson, and Y. E. Tan, “Septum Orbit Feedforward Correction at the AS”, in Proc. IBIC'20, Santos, Brazil, Sep. 2020, pp. 237-240. doi:10.18429/JACoW-IBIC2020-THPP16
[n] H. Hattori et al., “Manufacturing Techniques of Full Scale Crab Cavities and a Simplified Co-Axial Coupler for KEKB”, in Proc. SRF'99, Santa Fe, NM, USA, Nov. 1999, paper WEP027, pp. 481-483.
[n] S. Peggs et al., “Large Radial Shifts in the EIC Hadron Storage Ring”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 1443-1446. doi:10.18429/JACoW-IPAC2021-TUPAB042
[n] M. Lonza, D. Bulfone, R. De Monte, V. Forchi, and G. Gaio, “Status of the ELETTRA Global Orbit Feedback Project”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPCH091, pp. 3003-3005.
[n] J. R. Parsons, A. Fukasawa, G. E. Lawler, N. Majernik, and J. B. Rosenzweig, “Temperature Dependent Effects on Quality Factor in C-band RF Cavities”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 2826-2828. doi:10.18429/JACoW-IPAC2022-THPOTK027
[n] K. Fuchsberger et al., “Operational Experience during the LHC Injection Tests”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper MOPEC007, pp. 468-470.
[n] M. Schippers, J. Duppich, G. Goitein, E. Hug, M. Jermann, A. Mezger, and E. Pedroni, “First Year Of Operation Of PsiÔÇÖs New Sc Cyclotron And Beam Lines For Proton Therapy”, in Proc. Cyclotrons'07, Giardini-Naxos, Italy, Oct. 2007, pp. 15-17.
[n] B. A. Frolov, O. K. Belyaev, E. A. Konoplev, and A. M. Korotkov, “Magnetron Proton Source”, in Proc. RuPAC'18, Protvino, Russia, Oct. 2018, pp. 501-503. doi:10.18429/JACoW-RUPAC2018-THPSC48
[n] J. C. McNeur et al., “A Tapered Dielectric Structure for Laser Acceleration at Low Energy”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPD047, pp. 4387-4389.
[n] S. Mitsunobu et al., “Cryostat for TRISTAN Superconducting Cavity”, in Proc. SRF'89, Tsukuba, Japan, Aug. 1989, paper SRF89G29, pp. XX-XX.
[n] A. G. Khachatryan, K.-J. Boller, and F. A. van Goor, “Charged Particle Interaction with a Chirped Electromagnetic Pulse”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPPG046, pp. 1903-1905.
[n] S. Posen, M. Liepe, G. Catelani, J. P. Sethna, and M. K. Transtrum, “Theoretical Field Limits for Multi-Layer Superconductors”, in Proc. SRF'13, Paris, France, Sep. 2013, paper WEIOC04, pp. 794-799.
[n] D. C. Hagerman, “Los Alamos Meson Factory: Present Status and Future Plans”, in Proc. Cyclotrons'66, Gatlinburg, TN, USA, Aug. 1966, paper E-002, pp. XX-XX.
[n] M. M, K. A. Blokhina, A. M. Medvedev, and A. A. Starostenko, “FPGA-based Image Processing System for Electron Beam Welding Facility”, in Proc. PCaPAC'18, Hsinchu City, Taiwan, Oct. 2018, pp. 239-241. doi:10.18429/JACoW-PCaPAC2018-FRCC1
[n] W. Duckitt, J. K. Abraham, D. Marcato, and G. Savarese, “React Automation Studio: Modern Scientific Control with the Web”, in Proc. ICALEPCS'23, Cape Town, South Africa, Oct. 2023, pp. 1643-1649. doi:10.18429/JACoW-ICALEPCS2023-FR2BCO01
[n] H. E. Conzett, “Influence of Cyclotron Beam Properties on Experiments”, in Proc. Cyclotrons'66, Gatlinburg, TN, USA, Aug. 1966, paper F-001, pp. XX-XX.
[n] R. T. Dowd et al., “Conceptual Design of a Future Australian Light Source”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 1381-1384. doi:10.18429/JACoW-IPAC2022-TUPOMS001
[n] R. A. Marsh et al., “Advanced X-band Test Accelerator for High Brightness Electron and Gamma Ray Beams”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPEA056, pp. 3801-3803.
For LaTeX
Use Complete Form
For BibTeX
References
- G. E. McMichael et al., “Exploring the Beam Parameter Space of a CW RFQ Proton Accelerator”, in Proc. 13th Particle Accelerator Conf. (PAC'89), Chicago, IL, USA, Mar. 1989, pp. 980-983.
- N. I. Balalykin and A. B. Kuznetsov, “Opportunity of Development of Niobium Coated Copper Cavity”, in Proc. 6th European Particle Accelerator Conf. (EPAC'98), Stockholm, Sweden, Jun. 1998, paper TUP03K, pp. 1837-1839.
- G. X. Xia, “Ion Instability Study for the ILC 3 km Damping Ring”, in Proc. 24th Particle Accelerator Conf. (PAC'11), New York, NY, USA, Mar.-Apr. 2011, paper WEP103, pp. 1671-1673.
- K. Nakanishi et al., “KEKB/SuperKEKB Cryogenics Operation”, in Proc. 62nd ICFA Advanced Beam Dynamics Workshop on High Luminosity Circular e+e- Colliders (eeFACT'18), Hong Kong, China, Sep. 2018, pp. 276.
- C. N. Lehmann, M. P. Atkinson, and Y. E. Tan, “Septum Orbit Feedforward Correction at the AS”, in Proc. 9th Int. Beam Instrumentation Conf. (IBIC'20), Santos, Brazil, Sep. 2020, pp. 237-240.
- H. Hattori et al., “Manufacturing Techniques of Full Scale Crab Cavities and a Simplified Co-Axial Coupler for KEKB”, in Proc. 9th Int. Conf. RF Superconductivity (SRF'99), Santa Fe, NM, USA, Nov. 1999, paper WEP027, pp. 481-483.
- S. Peggs et al., “Large Radial Shifts in the EIC Hadron Storage Ring”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 1443-1446.
- M. Lonza, D. Bulfone, R. De Monte, V. Forchi, and G. Gaio, “Status of the ELETTRA Global Orbit Feedback Project”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THPCH091, pp. 3003-3005.
- J. R. Parsons, A. Fukasawa, G. E. Lawler, N. Majernik, and J. B. Rosenzweig, “Temperature Dependent Effects on Quality Factor in C-band RF Cavities”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 2826-2828.
- K. Fuchsberger et al., “Operational Experience during the LHC Injection Tests”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper MOPEC007, pp. 468-470.
- M. Schippers, J. Duppich, G. Goitein, E. Hug, M. Jermann, A. Mezger, and E. Pedroni, “First Year Of Operation Of PsiÔÇÖs New Sc Cyclotron And Beam Lines For Proton Therapy”, in Proc. 18th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'07), Giardini-Naxos, Italy, Oct. 2007, pp. 15-17.
- B. A. Frolov, O. K. Belyaev, E. A. Konoplev, and A. M. Korotkov, “Magnetron Proton Source”, in Proc. 26th Russian Particle Accelerator Conf. (RuPAC'18), Protvino, Russia, Oct. 2018, pp. 501-503.
- J. C. McNeur et al., “A Tapered Dielectric Structure for Laser Acceleration at Low Energy”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPD047, pp. 4387-4389.
- S. Mitsunobu et al., “Cryostat for TRISTAN Superconducting Cavity”, in Proc. 4th Int. Conf. RF Superconductivity (SRF'89), Tsukuba, Japan, Aug. 1989, paper SRF89G29, pp. XX-XX.
- A. G. Khachatryan, K.-J. Boller, and F. A. van Goor, “Charged Particle Interaction with a Chirped Electromagnetic Pulse”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPPG046, pp. 1903-1905.
- S. Posen, M. Liepe, G. Catelani, J. P. Sethna, and M. K. Transtrum, “Theoretical Field Limits for Multi-Layer Superconductors”, in Proc. 16th Int. Conf. RF Superconductivity (SRF'13), Paris, France, Sep. 2013, paper WEIOC04, pp. 794-799.
- D. C. Hagerman, “Los Alamos Meson Factory: Present Status and Future Plans”, in Proc. Int. Conf. on Isochronous Cyclotrons (Cyclotrons'66), Gatlinburg, TN, USA, Aug. 1966, paper E-002, pp. XX-XX.
- M. M, K. A. Blokhina, A. M. Medvedev, and A. A. Starostenko, “FPGA-based Image Processing System for Electron Beam Welding Facility”, in Proc. 12th International Workshop on Personal Computers and Particle Accelerator Controls (PCaPAC'18), Hsinchu City, Taiwan, Oct. 2018, pp. 239-241.
- W. Duckitt, J. K. Abraham, D. Marcato, and G. Savarese, “React Automation Studio: Modern Scientific Control with the Web”, in Proc. 19th International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS'23), Cape Town, South Africa, Oct. 2023, paper FR2BCO01, pp. 1643-1649.
- H. E. Conzett, “Influence of Cyclotron Beam Properties on Experiments”, in Proc. Int. Conf. on Isochronous Cyclotrons (Cyclotrons'66), Gatlinburg, TN, USA, Aug. 1966, paper F-001, pp. XX-XX.
- R. T. Dowd et al., “Conceptual Design of a Future Australian Light Source”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 1381-1384.
- R. A. Marsh et al., “Advanced X-band Test Accelerator for High Brightness Electron and Gamma Ray Beams”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPEA056, pp. 3801-3803.
Back to search