Favourites
For Word
[n] J. Wolfenden et al., “Application of Virtual Diagnostics in the FEBE Clara User Area”, in Proc. LINAC'22, Liverpool, UK, Aug.-Sep. 2022, pp. 231-234. doi:10.18429/JACoW-LINAC2022-MOPORI05
[n] N. Avreline, D. Gregoire, K. Piletskiy, and V. Zvyagintsev, “Test stand for conditioning high power tetrodes at TRIUMF”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 2973-2975. doi:10.18429/JACoW-IPAC2023-WEPA133
[n] E. Colby, V. Bharadwaj, J. F. Ostiguy, T. Nicol, M. Conde, and J. Rosenzweig, “Design and Construction of High Brightness RF Photoinjectors for TESLA”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper WPB08, pp. 967-969.
[n] D. Rees, M. Lynch, A. Regan, and A. Reass, “The Spallation Neutron Source (SNS) Linac RF System”, in Proc. LINAC'00, Monterey, CA, USA, Aug. 2000, paper THE01, pp. 965-967.
[n] H. Carter et al., “Automated Microwave Low Power Testing Techniques for NLC”, in Proc. LINAC'02, Gyeongju, Korea, Aug. 2002, paper TH471, pp. 761-763.
[n] L. S. Shao et al., “Vacuum Laser Acceleration at BNL-ATF”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE6RFP096, pp. 3022-3024.
[n] F. Babagoli Moziraji, H. Afarideh, M. Dehghan, and F. Ghasemi, “Design of 71 MHz Power Amplifier in a Single-ended Architecture for IRANCYC-10 Cyclotron”, in Proc. IPAC'21, Campinas, Brazil, May 2021, pp. 2325-2327. doi:10.18429/JACoW-IPAC2021-TUPAB350
[n] B. Ledroit and K. Aulenbacher, “Collimation of Target Induced Halo Following MAGIX at MESA”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 3839-3842. doi:10.18429/JACoW-IPAC2019-THPRB019
[n] R. A. Sacks and E. P. Colton, “Improvements to PARMILA”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2443-2446.
[n] P. Gagliardi et al., “Large Scale Production at Ansaldo of 352 MHz Niobium Coated LEP-CERN Cavities: Development Activities and First Results”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 1063-1066.
[n] Y. Jiang, M. Gai, J. Hirshfield, M. Palmer, and S. Shchelkunov, “Novel deuteron accelerator for nuclear waste transmutation”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 1564-1566. doi:10.18429/JACoW-IPAC2025-TUPS059
[n] X. Wu, U. Wienands, T. Hunter, R. York, and S. Sheynin, “Extraction System Design for the SSC Low Energy Booster”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 393-396.
[n] G.-Y. Hsiung, Y.-C. Yang, F.-Y. Chang, C.-C. Chang, and C.-K. Chan, “Setup of Goubau Line system for impedance-measurement of vacuum components at the NSRRC”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1578-1581. doi:10.18429/JACoW-IPAC2024-TUPR64
[n] I. E. Campisi et al., “4.2 K Operation of the SNS Cryomodules”, in Proc. PAC'05, Knoxville, TN, USA, May 2005, paper WPAT085, pp. 4173-4175.
[n] F. Pan et al., “Nb Sputtered 325 MHz QWR Cavities for CiADS”, in Proc. HIAT'18, Lanzhou, China, Oct. 2018, pp. 145-147. doi:10.18429/JACoW-HIAT2018-WEPB06
[n] W. D. Cornelius, “Design and Performance of the Inter-RFQ Beam Transport and Matching Section for the SAIC PET Isotope Production Accelerator”, in Proc. PAC'93, Washington D.C., USA, Mar. 1993, pp. 2994-2997.
[n] I.-C. Sheng and Y.-M. Hsiao, “Evaluating the feasibility of TPS high heat load components for high-current operation using TMSI”, in Proc. IPAC'25, Taipei, Taiwan, Jun. 2025, pp. 979-982. doi:10.18429/JACoW-IPAC2025-TUPB015
[n] S. Bolton et al., “Development of a second-generation system for the reliable distribution of machine protection parameters”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3401-3404. doi:10.18429/JACoW-IPAC2024-THPG60
[n] D. Proft, K. Desch, D. Elsner, and M. T. Switka, “Upgrade of the 25 MW RF Station for the Linear Accelerator LINAC2 at ELSA”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 838-840. doi:10.18429/JACoW-IPAC2022-TUPOST002
For LaTeX
Use Complete Form
For BibTeX
References
- J. Wolfenden et al., “Application of Virtual Diagnostics in the FEBE Clara User Area”, in Proc. 31st Linear Accelerator Conf. (LINAC'22), Liverpool, UK, Aug.-Sep. 2022, pp. 231-234.
- N. Avreline, D. Gregoire, K. Piletskiy, and V. Zvyagintsev, “Test stand for conditioning high power tetrodes at TRIUMF”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper WEPA133, pp. 2973-2975.
- E. Colby, V. Bharadwaj, J. F. Ostiguy, T. Nicol, M. Conde, and J. Rosenzweig, “Design and Construction of High Brightness RF Photoinjectors for TESLA”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper WPB08, pp. 967-969.
- D. Rees, M. Lynch, A. Regan, and A. Reass, “The Spallation Neutron Source (SNS) Linac RF System”, in Proc. 20th Linear Accelerator Conf. (LINAC'00), Monterey, CA, USA, Aug. 2000, paper THE01, pp. 965-967.
- H. Carter et al., “Automated Microwave Low Power Testing Techniques for NLC”, in Proc. 21st Linear Accelerator Conf. (LINAC'02), Gyeongju, Korea, Aug. 2002, paper TH471, pp. 761-763.
- L. S. Shao et al., “Vacuum Laser Acceleration at BNL-ATF”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE6RFP096, pp. 3022-3024.
- F. Babagoli Moziraji, H. Afarideh, M. Dehghan, and F. Ghasemi, “Design of 71 MHz Power Amplifier in a Single-ended Architecture for IRANCYC-10 Cyclotron”, in Proc. 12th Int. Particle Accelerator Conf. (IPAC'21), Campinas, Brazil, May 2021, pp. 2325-2327.
- B. Ledroit and K. Aulenbacher, “Collimation of Target Induced Halo Following MAGIX at MESA”, in Proc. 10th Int. Particle Accelerator Conf. (IPAC'19), Melbourne, Australia, May 2019, pp. 3839-3842.
- R. A. Sacks and E. P. Colton, “Improvements to PARMILA”, in Proc. 9th Particle Accelerator Conf. (PAC'81), Washington D.C., USA, Mar. 1981, pp. 2443-2446.
- P. Gagliardi et al., “Large Scale Production at Ansaldo of 352 MHz Niobium Coated LEP-CERN Cavities: Development Activities and First Results”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 1063-1066.
- Y. Jiang, M. Gai, J. Hirshfield, M. Palmer, and S. Shchelkunov, “Novel deuteron accelerator for nuclear waste transmutation”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper TUPS059, pp. 1564-1566.
- X. Wu, U. Wienands, T. Hunter, R. York, and S. Sheynin, “Extraction System Design for the SSC Low Energy Booster”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 393-396.
- G.-Y. Hsiung, Y.-C. Yang, F.-Y. Chang, C.-C. Chang, and C.-K. Chan, “Setup of Goubau Line system for impedance-measurement of vacuum components at the NSRRC”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper TUPR64, pp. 1578-1581.
- I. E. Campisi et al., “4.2 K Operation of the SNS Cryomodules”, in Proc. 21st Particle Accelerator Conf. (PAC'05), Knoxville, TN, USA, May 2005, paper WPAT085, pp. 4173-4175.
- F. Pan et al., “Nb Sputtered 325 MHz QWR Cavities for CiADS”, in Proc. 14th Int. Conf. on Heavy Ion Accelerator Technology (HIAT'18), Lanzhou, China, Oct. 2018, pp. 145-147.
- W. D. Cornelius, “Design and Performance of the Inter-RFQ Beam Transport and Matching Section for the SAIC PET Isotope Production Accelerator”, in Proc. 15th Particle Accelerator Conf. (PAC'93), Washington D.C., USA, Mar. 1993, pp. 2994-2997.
- I.-C. Sheng and Y.-M. Hsiao, “Evaluating the feasibility of TPS high heat load components for high-current operation using TMSI”, in Proc. 16th Int. Particle Accelerator Conf. (IPAC'25), Taipei, Taiwan, Jun. 2025, paper TUPB015, pp. 979-982.
- S. Bolton et al., “Development of a second-generation system for the reliable distribution of machine protection parameters”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPG60, pp. 3401-3404.
- D. Proft, K. Desch, D. Elsner, and M. T. Switka, “Upgrade of the 25 MW RF Station for the Linear Accelerator LINAC2 at ELSA”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 838-840.
Back to search