Favourites
For Word
[n] M. Putignano, K.-U. K??hnel, and C. P. Welsch, “Design of a Nozzle-Skimmer System for a Low Perturbation Ionization Beam Profile Monitor”, in Proc. DIPAC'09, Basel, Switzerland, May 2009, paper TUPB08, pp. 179-181.
[n] G. L. Arduini et al., “LEP1 Operation, 1989-1995”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper MOO02A, pp. 286-288.
[n] N. Butler, M. P. J. Gaudreau, M. K. Kempkes, J. Kinross-Wright, and F. M. Niell, “A Stripline Kicker Driver for the Next Generation Light Source”, in Proc. NAPAC'13, Pasadena, CA, USA, Sep.-Oct. 2013, paper THPBA11, pp. 1250-1252.
[n] S. Fukuda et al., “RF Source of Compact ERL in KEK”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper THPEB046, pp. 3981-3983.
[n] C. Ohmori et al., “Synchrotron RF System for JAERI-KEK Joint Project”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MPPH052, pp. 888-890.
[n] B. Lindstr?Âm et al., “Settings for Improved Betatron Collimation in the First Run of the High Luminosity LHC”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 1366-1369. doi:10.18429/JACoW-IPAC2022-TUPOTK062
[n] J. Q. Li, K. Fan, and J. Wang, “A Novel Design of a Dielectric-filled Cavity BPM for HUST-PTF”, presented at the IBIC'23, Saskatoon, Canada, Sep. 2023, paper MOP029, unpublished.
[n] S. Varnasseri, “Design of a Stripline Kicker for Tune Measurement in SESAME Storage Ring”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper WEPMA049, pp. 390-392.
[n] A. van der Linden et al., “80 kV Electrostatic Wire Septum for AmPS”, in Proc. EPAC'92, Berlin, Germany, Mar. 1992, pp. 1510-1513.
[n] A. Khan, O. Boine-Frankenheim, and C. P. Stoll, “Space Charge and Microbunching Studies for the Injection Arc of MESA”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3221-3224. doi:10.18429/JACoW-IPAC2018-THPAK008
[n] J. Harris et al., “A Fast Beam Position Monitor for UMER”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPAH077, pp. 1387-1389.
[n] M. Lu et al., “Electrochemical Deposition of Nb?Sn on the Surface of Cu Substrates”, in Proc. SRF'19, Dresden, Germany, Jun.-Jul. 2019, pp. 624-627. doi:10.18429/JACoW-SRF2019-TUP076
[n] N. Biancacci, K. S. B. Li, E. M?®tral, and B. Salvant, “The HL-LHC Impedance Model and Aspects of Beam Stability”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 606-609. doi:10.18429/JACoW-IPAC2016-MOPOR009
[n] R. W. Shaw et al., “Spallation Neutron Source (SNS) Diamond Stripper Foil Development”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper MOPAS081, pp. 620-622.
For LaTeX
Use Complete Form
For BibTeX
References
- M. Putignano, K.-U. K??hnel, and C. P. Welsch, “Design of a Nozzle-Skimmer System for a Low Perturbation Ionization Beam Profile Monitor”, in Proc. 9th European Workshop on Beam Diagnostics and Instrumentation for Particle Accelerators (DIPAC'09), Basel, Switzerland, May 2009, paper TUPB08, pp. 179-181.
- G. L. Arduini et al., “LEP1 Operation, 1989-1995”, in Proc. 5th European Particle Accelerator Conf. (EPAC'96), Sitges, Spain, Jun. 1996, paper MOO02A, pp. 286-288.
- N. Butler, M. P. J. Gaudreau, M. K. Kempkes, J. Kinross-Wright, and F. M. Niell, “A Stripline Kicker Driver for the Next Generation Light Source”, in Proc. North American Particle Accelerator Conf. (NAPAC'13), Pasadena, CA, USA, Sep.-Oct. 2013, paper THPBA11, pp. 1250-1252.
- S. Fukuda et al., “RF Source of Compact ERL in KEK”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper THPEB046, pp. 3981-3983.
- C. Ohmori et al., “Synchrotron RF System for JAERI-KEK Joint Project”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper MPPH052, pp. 888-890.
- B. Lindstr?Âm et al., “Settings for Improved Betatron Collimation in the First Run of the High Luminosity LHC”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 1366-1369.
- J. Q. Li, K. Fan, and J. Wang, “A Novel Design of a Dielectric-filled Cavity BPM for HUST-PTF”, presented at the 12th International Beam Instrumentation Conference (IBIC'23), Saskatoon, Canada # e.g. "Barcelona, Spain" or "San Francisco, CA, USA", Sep. 2023, paper MOP029, unpublished.
- S. Varnasseri, “Design of a Stripline Kicker for Tune Measurement in SESAME Storage Ring”, in Proc. 4th Asian Particle Accelerator Conf. (APAC'07), Indore, India, Jan.-Feb. 2007, paper WEPMA049, pp. 390-392.
- A. van der Linden et al., “80 kV Electrostatic Wire Septum for AmPS”, in Proc. 3rd European Particle Accelerator Conf. (EPAC'92), Berlin, Germany, Mar. 1992, pp. 1510-1513.
- A. Khan, O. Boine-Frankenheim, and C. P. Stoll, “Space Charge and Microbunching Studies for the Injection Arc of MESA”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3221-3224.
- J. Harris et al., “A Fast Beam Position Monitor for UMER”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper TPAH077, pp. 1387-1389.
- M. Lu et al., “Electrochemical Deposition of Nb?Sn on the Surface of Cu Substrates”, in Proc. 19th Int. Conf. RF Superconductivity (SRF'19), Dresden, Germany, Jun.-Jul. 2019, pp. 624-627.
- N. Biancacci, K. S. B. Li, E. M?®tral, and B. Salvant, “The HL-LHC Impedance Model and Aspects of Beam Stability”, in Proc. 7th Int. Particle Accelerator Conf. (IPAC'16), Busan, Korea, May 2016, pp. 606-609.
- R. W. Shaw et al., “Spallation Neutron Source (SNS) Diamond Stripper Foil Development”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper MOPAS081, pp. 620-622.
Back to search