JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	Y. Luo and W. Fischer, “Computational Challenges for Beam-Beam Simulations for RHIC”, in Proc. HB'10, Morschach, Switzerland, Sep.-Oct. 2010, paper WEO2C02, pp. 521-523. 
[n]	M. E. Gruchalla, P. Chacon, J. D. Gilpatrick, D. Martinez, J. F. Power, and B. G. Smith, “LANSCE Wire Scanner AFE: Analysis, Design, and Fabrication”, in Proc. BIW'10, Santa Fe, NM, USA, May 2010, paper TUPSM016, pp. 141-145. 
[n]	G. Gaio, N. Bruchon, M. Lonza, and L. Saule, “Advances in Automatic Performance Optimization at FERMI”, in Proc. ICALEPCS'17, Barcelona, Spain, Oct. 2017, pp. 352-356. doi:10.18429/JACoW-ICALEPCS2017-TUMPA07
[n]	S. Burger, E. Bravin, G. Ferioli, G. J. Focker, A. Guerrero Ollacarizqueta, and R. Maccaferri, “A New TV Beam Observation System for CERN”, in Proc. DIPAC'05, Lyon, France, Jun. 2005, paper POT030, pp. 214-216. 
[n]	M. E. Angoletta et al., “Longitudinal Beam Diagnostic from a Distributed Electrostatic Pick-Up in CERN's ELENA Ring”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper WEPF28, pp. 883-886. 
[n]	H. Wang, W. Gai, A. Kanareykin, W. Liu, and T. Wong, “Design and Prototyping of the AMD for the ILC”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPMN092, pp. 2924-2926. 
[n]	S. Allison et al., “Active Vibration Suppression R+D for the Next Linear Collider”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper TPAH013, pp. 1261-1263. 
[n]	S. Zhang, S. V. Benson, D. Douglas, D. Hardy, G. Neil, and M. D. Shinn, “Longitudinal Phase Space Characterization of Electron Bunches At the JLab FEL Facility”, in Proc. FEL'06, Berlin, Germany, Aug.-Sep. 2006, paper THPPH066, pp. 740-743. 
[n]	S. Arsenyev, D. Schulte, and O. Boine-Frankenheim, “FCC-hh transverse impedance budget”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 149-152. doi:10.18429/JACoW-IPAC2018-MOPMF029
[n]	M. Ishii et al., “A Data Acquisition System for Abnormal RF Waveform at SACLA”, in Proc. ICALEPCS'15, Melbourne, Australia, Oct. 2015, pp. 721-724. doi:10.18429/JACoW-ICALEPCS2015-WEPGF014
[n]	P. Nouvel, M. Jonker, B. Puccio, and H. Tap, “Design Process of the Interlock Systems for the Compact Linear Collider”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPFI061, pp. 3433-3435. 
[n]	F. F. Van der Veken and M. Giovannozzi, “Scaling Laws for the Time Dependence of Luminosity in Hadron Circular Accelerators based on Simple Models of Dynamic Aperture Evolution”, in Proc. HB'18, Daejeon, Korea, Jun. 2018, pp. 260-265. doi:10.18429/JACoW-HB2018-WEP2PO002
[n]	W. Li, C. Diao, J. Y. Li, and G. Liu, “The Control System of HLS”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper MPPH018, pp. 809-810. 
[n]	M. D. Shinn, “Industrial Applications of High Average Power FELS”, presented at the PAC'05, Knoxville, TN, USA, May 2005, paper FOAB006, unpublished. 
[n]	A. Deyhim, J. D. Kulesza, C. Diao, and H. O. Moser, “Development of a Super-Mini Undulator”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper TUP239, pp. 1274-1276. 
[n]	W. Wang, H. T. H, X. Y. He, and D. R. Xu, “Alignment and Installation for the FELiChEM project”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 4977-4979. doi:10.18429/JACoW-IPAC2018-THPML127
[n]	N. Delerue et al., “Presentation of the Smith-Purcell Experiment at SOLEIL”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper TUPC37, pp. 460-463. 
[n]	J. P. Duke, D. J. S. Findlay, and G. R. Murdoch, “Design of a Gas Scattering Energy Analyser for the ISIS RFQ Accelerator Test Stand”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper WPAH115, pp. 2350-2352. 
[n]	S. D. Walker, A. Abramov, S. T. Boogert, S. M. Gibson, L. J. Nevay, and H. Pikhartova, “Precision Modelling of Energy Deposition in the LHC using BDSIM”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 723-726. doi:10.18429/JACoW-IPAC2019-MOPRB064
[n]	S. Zhang, D. Hardy, G. Neil, and M. D. Shinn, “Characterization and Performance of a High-Power Solid-State Laser for a High-Current Photocathode Injector”, in Proc. FEL'05, Palo Alto, CA, USA, Aug. 2005, paper TUPP059, pp. XX-XX. 
[n]	M. Ivanyan, A. Grigoryan, A. Sargsyan, and A. V. Tsakanian, “The Low Energy Particle Wakefield Radiation From the Open End of Internally Coated Metallic Tube”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 1644-1646. doi:10.18429/JACoW-IPAC2014-TUPRI038
[n]	V. Forte et al., “Overview of the CERN PSB-to-PS Transfer Line Optics Matching Studies in View of the LHC Injectors Upgrade Project”, in Proc. HB'18, Daejeon, Korea, Jun. 2018, pp. 272-277. doi:10.18429/JACoW-HB2018-WEP2PO006
[n]	D. O. Calcoen, S. Gabourin, and A. P. Siemko, “CERN Beam Interlock Redundant Dump Trigger Module Performance during LHC Run 2”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 4189-4191. doi:10.18429/JACoW-IPAC2016-THPOY041
[n]	J. Laskar, L. Nadolski, D. S. Robin, and C. Steier, “Lattice Model Calibration and Frequency Map Measurements at the ALS”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper TUP3A15, pp. 1077-1079. 
[n]	J. Burke and M. Procter, “An objective approach to determining the steel penetration capabilities of X-ray cargo inspection systems”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 5124-5126. doi:10.18429/JACoW-IPAC2023-THPM109
[n]	G. J. Focker, S. Bart Pedersen, and E. Bravin, “The Renovation of the ISOLDE Instrumentation”, in Proc. DIPAC'05, Lyon, France, Jun. 2005, paper POW003, pp. XX-XX. 
[n]	A. Matheisen, B. van der Horst, B. Petersen, S. S?ñgebarth, and P. Schilling, “Preparation Sequences for Electro-Polished High Gradient Multi-Cell Cavities at DESY”, in Proc. SRF'05, Ithaca, NY, USA, Jul. 2005, paper THP08, pp. 470-472. 
[n]	A. Citron, “Status Report on the Feasibility Study for a Superconducting Linear Accelerator for Protons”, in Proc. LINAC'66, Los Alamos, NM, USA, Oct. 1966, paper X-03, pp. 497-498. 
[n]	S. Fukumoto and S. Takano, “KEK Preinjector Accelerating Column”, in Proc. LINAC'76, Chalk River, Canada, Sep. 1976, paper D02, pp. 189-192. 
[n]	F. Gao, W. Gai, C.-J. Jing, W. Liu, and T. Wong, “Design of a 20.8/35.1 GHz Higher-Order-Mode Dielectric-Loaded Power Extractor Set”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper FR5RFP002, pp. 4538-4540. 
[n]	L. S?©by, D. J. Williams, A. Jansson, and M. Lindroos, “Measurements with the Magnetic Quadrupole Pick-up in the CERN PS”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP4A05, pp. 1744-1746. 
[n]	Y. Funakoshi, “Luminosity Tuning at KEKB”, in Proc. eeFACT'16, Daresbury, UK, Oct. 2016, pp. 147-150. doi:10.18429/JACoW-eeFACT2016-TUT3BH3
[n]	H. J. Halama and J. C. Herrera, “Comparison of Cold and Warm Vacuum Systems for Intersecting Storage Rings”, in Proc. PAC'75, Washington D.C., USA, Mar. 1975, pp. 1492-1496. 
[n]	A. Loulergue et al., “TDR baseline lattice for SOLEIL II upgrade project”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 1346-1349. doi:10.18429/JACoW-IPAC2024-TUPG47
[n]	A. Fedotov and G. Parzen, “Compensation of Nonlinear Resonances in the Presence of Space Charge”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper WPPG001, pp. 2589-2591. 
[n]	?à. Andersson, M. Eriksson, M. Georgsson, G. LeBlanc, L.-J. Lindgren, and S. Werin, “MAX-III, a 700 MeV Storage Ring for Synchrotron Radiation”, in Proc. EPAC'00, Vienna, Austria, Jun. 2000, paper WEP4A19, pp. 643-644. 
[n]	W. Schappert et al., “Adaptive Lorentz Force Detuning Compensation in the ILC S1-G Cryomodule at KEK”, in Proc. SRF'11, Chicago, IL, USA, Jul. 2011, paper MOPO064, pp. 254-257. 
[n]	S. Ahmed et al., “Beam Breakup Studies for New Cryo-Unit”, in Proc. PAC'11, New York, NY, USA, Mar.-Apr. 2011, paper WEP085, pp. 1633-1635. 
[n]	N. Nishimori et al., “Report From Working Group 1 - Injectors, Guns, & Cathodes - DC Guns”, in Proc. ERL'09, Ithaca, NY, USA, Jun. 2009, paper WG102, pp. 6-23. 
[n]	L. M. Hein, J. Esberg, and M. Jonker, “CLIC Decelerator - Machine Protection”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 482-484. doi:10.18429/JACoW-IPAC2014-MOPME048
[n]	C. Kurfuerst, M. R. Bartosik, B. Dehning, T. Eisel, M. Sapinski, and V. Eremin, “Operation of Silicon, Diamond and Liquid Helium Detectors in the Range of Room Temperature to 1.9 Kelvin and After an Irradiation Dose of Several Mega Gray”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper WEPC44, pp. 791-794. 
[n]	L. Nadolski and J. Laskar, “Application of a New Class of Symplectic Integrators to Accelerator Tracking”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper WEPLE076, pp. 1276-1278. 
[n]	A. Garcia Mu??oz and S. Gabourin, “Testing Digital Electronic Protection Systems”, in Proc. ICALEPCS'11, Grenoble, France, Oct. 2011, paper WEPMU002, pp. 1047-1050. 
[n]	D. S. Robin et al., “Successful Completion of the ALS Superbend Project”, in Proc. EPAC'02, Paris, France, Jun. 2002, paper TUALA002, pp. 215-217. 
[n]	F. Gao et al., “C-Band High Power RF Generation and Extraction Using a Dielectric Loaded Waveguide”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPMN088, pp. 2912-2914. 
[n]	O. R. Blanco-Garc?¡a et al., “Optics Model and Measurements of the DANE Transfer Lines”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3249-3251. doi:10.18429/JACoW-IPAC2018-THPAK020
[n]	J. L. Lamaack et al., “New Beam Position Monitor System for PETRA IV”, presented at the IBIC'23, Saskatoon, Canada, Sep. 2023, paper MOP021, unpublished. 
[n]	J. Karn, B. Dunham, and M. Tiefenback, “Operational Monitoring of the CEBAF RF System”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper MPR15, pp. 2271-2272. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search