Favourites
For Word
[n] A. Schempp, H. Deitinghoff, J. R. Delayen, and K. W. Shepard, “Design and Application Possibilities of Superconducting Radio-Frequency Quadrupoles”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper MO414, pp. 79-81.
[n] J. D. Fox et al., “Excitation of Intra-bunch Vertical Motion in the SPS - Implications for Feedback Control of Ecloud and TMCI Instabilities”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOEPPB015, pp. 112-114.
[n] A. D. Yeremian, V. A. Dolgashev, J. Neilson, and S. G. Tantawi, “A Dual-mode Accelerating Cavity to Test RF Breakdown Dependence on RF Magnetic Fields”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPC073, pp. 247-249.
[n] H. Hama and M. Yasuda, “Consideration on Terahertz FEL using Pre-bunched Electrons Shorter than the Wavelength”, in Proc. FEL'09, Liverpool, UK, Aug. 2009, paper TUPC69, pp. 394-397.
[n] N. Li, A. Madur, and J. Jin, “Tightening the Tolerance Budget of Core Fabrication to Achieve Higher Magnet Performance”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper WEPO022, pp. 2448-2450.
[n] E. Kikutani, A. Akiyama, T. Katoh, M. Suetake, and M. Tobiyama, “Bucket Selection System of the KEKB Rings”, in Proc. APAC'98, Tsukuba, Japan, Mar. 1998, paper 5D054, pp. 525-527.
[n] M. Valette et al., “Safe Disposal of the LHC Beam without Beam Dump - Method and Experimental Verification”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 253-256. doi:10.18429/JACoW-IPAC2018-MOPMF060
[n] H. Hama, F. Hinode, M. Kawai, F. Miyahara, K. Nanbu, and M. Yasuda, “Development of Accelerator-Based THz Sources at Tohoku University”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE5RFP052, pp. 2386-2388.
[n] P. Burrows et al., “Electromagnetic Background Tests for the ILC Interaction Point Feedback System”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper WEOBAB01, pp. 1970-1972.
[n] F. Armborst, J. Kallestrup, M. I. Besana, and M. Paraliev, “SLS 2.0 machine protection”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1019-1022. doi:10.18429/JACoW-IPAC2023-MOPM018
[n] T. P. Hughes, D. P. Prono, W. M. Tuzel, and J. R. Vananne, “Design of Beam Cleanup Zone for DARHT-2”, in Proc. PAC'01, Chicago, IL, USA, Jun. 2001, paper RPPH038, pp. 3311-3313.
[n] C. Garion, I. Slits, and J.-P. G. Tock, “Installation and Quality Assurance of the Interconnections between Cryo-assemblies of the LHC Long Straight Sections”, in Proc. EPAC'06, Edinburgh, UK, Jun. 2006, paper THPCH183, pp. 3227-3229.
[n] Y. Yano, A. Goto, and T. Katayama, “Overview of RIKEN RI Beam Factory Project”, in Proc. Cyclotrons'98, Caen, France, Jun. 1998, paper K-03, pp. 696-703.
[n] L. M. Young, “Tuning and Stabilization of RFQ's”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper WE202, pp. 530-534.
[n] L. Yin et al., “A Mechanical Installation Prototype for the SSRF Storage Ring”, in Proc. APAC'07, Indore, India, Jan.-Feb. 2007, paper THPMA084, pp. 755-757.
[n] E. Chiadroni et al., “Status of Plasma-Based Experiments at the SPARC_LAB Test Facility”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 603-606. doi:10.18429/JACoW-IPAC2018-TUXGBE3
[n] C. Ronsivalle, C. R. Frascati, S. Monti, C. R. Rome, L. Picardi, and F. Troiani, “Design of the Proton Beam Line for the Trade Experiment”, in Proc. EPAC'04, Lucerne, Switzerland, Jul. 2004, paper TUPLT062, pp. 1297-1299.
[n] H. Matsumoto, Y. Iino, C. Fujiwara, Z. Kabeya, and T. Onda, “Experience on the High-Power SiC Microwave Dummy-Load Using SiC Absorber”, in Proc. PAC'99, New York, NY, USA, Mar. 1999, paper MOP76, pp. 842-844.
[n] E. Boltezar et al., “Experimental RFQ as Injector to the CERN Linac I”, in Proc. LINAC'81, Santa Fe, NM, USA, Oct. 1981, paper H15, pp. 302-305.
[n] J. Dilly and R. Tom?ís Garc?¡a, “A Flexible Nonlinear Resonance Driving Term Based Correction Algorithm with Feed-Down”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 1999-2002. doi:10.18429/JACoW-IPAC2022-WEPOPT061
[n] S. M. Lidia, D. H. Whittum, and J. T. Donohue, “W-Band Free Electron Laser for High Gradient Structure Research”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 3V035, pp. 900-902.
[n] A. Schempp, “Variable Energy and Heavy Ion RFQs”, in Proc. LINAC'90, Albuquerque, NM, USA, Sep. 1990, paper WE203, pp. 535-539.
[n] B. D. S. Hall, P. K. Ambattu, G. Burt, C. Lingwood, P. Goudket, and C. Hill, “Study of the Variation of Transverse Voltage in the 4 Rod Crab Cavity for LHC”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPC106, pp. 322-324.
For LaTeX
Use Complete Form
For BibTeX
References
- A. Schempp, H. Deitinghoff, J. R. Delayen, and K. W. Shepard, “Design and Application Possibilities of Superconducting Radio-Frequency Quadrupoles”, in Proc. 1990 Linear Accelerator Conf. (LINAC'90), Albuquerque, NM, USA, Sep. 1990, paper MO414, pp. 79-81.
- J. D. Fox et al., “Excitation of Intra-bunch Vertical Motion in the SPS - Implications for Feedback Control of Ecloud and TMCI Instabilities”, in Proc. 3rd Int. Particle Accelerator Conf. (IPAC'12), New Orleans, LA, USA, May 2012, paper MOEPPB015, pp. 112-114.
- A. D. Yeremian, V. A. Dolgashev, J. Neilson, and S. G. Tantawi, “A Dual-mode Accelerating Cavity to Test RF Breakdown Dependence on RF Magnetic Fields”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper MOPC073, pp. 247-249.
- H. Hama and M. Yasuda, “Consideration on Terahertz FEL using Pre-bunched Electrons Shorter than the Wavelength”, in Proc. 31st Int. Free Electron Laser Conf. (FEL'09), Liverpool, UK, Aug. 2009, paper TUPC69, pp. 394-397.
- N. Li, A. Madur, and J. Jin, “Tightening the Tolerance Budget of Core Fabrication to Achieve Higher Magnet Performance”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper WEPO022, pp. 2448-2450.
- E. Kikutani, A. Akiyama, T. Katoh, M. Suetake, and M. Tobiyama, “Bucket Selection System of the KEKB Rings”, in Proc. 1st Asian Particle Accelerator Conf. (APAC'98), Tsukuba, Japan, Mar. 1998, paper 5D054, pp. 525-527.
- M. Valette et al., “Safe Disposal of the LHC Beam without Beam Dump - Method and Experimental Verification”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 253-256.
- H. Hama, F. Hinode, M. Kawai, F. Miyahara, K. Nanbu, and M. Yasuda, “Development of Accelerator-Based THz Sources at Tohoku University”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE5RFP052, pp. 2386-2388.
- P. Burrows et al., “Electromagnetic Background Tests for the ILC Interaction Point Feedback System”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper WEOBAB01, pp. 1970-1972.
- F. Armborst, J. Kallestrup, M. I. Besana, and M. Paraliev, “SLS 2.0 machine protection”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper MOPM018, pp. 1019-1022.
- T. P. Hughes, D. P. Prono, W. M. Tuzel, and J. R. Vananne, “Design of Beam Cleanup Zone for DARHT-2”, in Proc. 19th Particle Accelerator Conf. (PAC'01), Chicago, IL, USA, Jun. 2001, paper RPPH038, pp. 3311-3313.
- C. Garion, I. Slits, and J.-P. G. Tock, “Installation and Quality Assurance of the Interconnections between Cryo-assemblies of the LHC Long Straight Sections”, in Proc. 10th European Particle Accelerator Conf. (EPAC'06), Edinburgh, UK, Jun. 2006, paper THPCH183, pp. 3227-3229.
- Y. Yano, A. Goto, and T. Katayama, “Overview of RIKEN RI Beam Factory Project”, in Proc. 15th Int. Cyclotron Conf. and Their Applications (Cyclotrons'98), Caen, France, Jun. 1998, paper K-03, pp. 696-703.
- L. M. Young, “Tuning and Stabilization of RFQ's”, in Proc. 1990 Linear Accelerator Conf. (LINAC'90), Albuquerque, NM, USA, Sep. 1990, paper WE202, pp. 530-534.
- L. Yin et al., “A Mechanical Installation Prototype for the SSRF Storage Ring”, in Proc. 4th Asian Particle Accelerator Conf. (APAC'07), Indore, India, Jan.-Feb. 2007, paper THPMA084, pp. 755-757.
- E. Chiadroni et al., “Status of Plasma-Based Experiments at the SPARC_LAB Test Facility”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 603-606.
- C. Ronsivalle, C. R. Frascati, S. Monti, C. R. Rome, L. Picardi, and F. Troiani, “Design of the Proton Beam Line for the Trade Experiment”, in Proc. 9th European Particle Accelerator Conf. (EPAC'04), Lucerne, Switzerland, Jul. 2004, paper TUPLT062, pp. 1297-1299.
- H. Matsumoto, Y. Iino, C. Fujiwara, Z. Kabeya, and T. Onda, “Experience on the High-Power SiC Microwave Dummy-Load Using SiC Absorber”, in Proc. 18th Particle Accelerator Conf. (PAC'99), New York, NY, USA, Mar. 1999, paper MOP76, pp. 842-844.
- E. Boltezar et al., “Experimental RFQ as Injector to the CERN Linac I”, in Proc. 1981 Linear Accelerator Conf. (LINAC'81), Santa Fe, NM, USA, Oct. 1981, paper H15, pp. 302-305.
- J. Dilly and R. Tom?ís Garc?¡a, “A Flexible Nonlinear Resonance Driving Term Based Correction Algorithm with Feed-Down”, in Proc. 13th Int. Particle Accelerator Conf. (IPAC'22), Bangkok, Thailand, Jun. 2022, pp. 1999-2002.
- S. M. Lidia, D. H. Whittum, and J. T. Donohue, “W-Band Free Electron Laser for High Gradient Structure Research”, in Proc. 17th Particle Accelerator Conf. (PAC'97), Vancouver, Canada, May 1997, paper 3V035, pp. 900-902.
- A. Schempp, “Variable Energy and Heavy Ion RFQs”, in Proc. 1990 Linear Accelerator Conf. (LINAC'90), Albuquerque, NM, USA, Sep. 1990, paper WE203, pp. 535-539.
- B. D. S. Hall, P. K. Ambattu, G. Burt, C. Lingwood, P. Goudket, and C. Hill, “Study of the Variation of Transverse Voltage in the 4 Rod Crab Cavity for LHC”, in Proc. 2nd Int. Particle Accelerator Conf. (IPAC'11), San Sebastian, Spain, Sep. 2011, paper MOPC106, pp. 322-324.
Back to search