JaCoW Logo

Reference Search

Warning
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.

Favourites


For Word

[n]	B. Marchetti et al., “X-Band TDS Project”, in Proc. IPAC'17, Copenhagen, Denmark, May 2017, pp. 184-187. doi:10.18429/JACoW-IPAC2017-MOPAB044
[n]	J. R. Delayen and H. Wang, “Design of Superconducting Parallel Bar Deflecting and Crabbing RF Structures”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE5PFP053, pp. 2120-2122. 
[n]	P. J. Phillips et al., “Single Shot Longitudinal Bunch Profile Measurements by Temporally Resolved Electro-Optical Detection”, in Proc. DIPAC'07, Venice, Italy, May 2007, paper WEO2A02, pp. 221-223. 
[n]	L. M. Bobb, N. Chritin, T. Lefevre, M. G. Billing, and V. Karataev, “UV/X-ray Diffraction Radiation for Non-intercepting Micron-scale Beam Size Measurement”, in Proc. IBIC'12, Tsukuba, Japan, Oct. 2012, paper MOCC01, pp. 24-28. 
[n]	K. Jensen, A. Balter, D. W. Feldman, N. A. Moody, and P. G. O, “Photoemission from Coated Surfaces: A Comparison of Theory to Experiment”, in Proc. FEL'05, Palo Alto, CA, USA, Aug. 2005, paper TUPP060, pp. XX-XX. 
[n]	L. Shi et al., “Dielectric Waveguide-Based THz Radiator Study for SwissFEL”, in Proc. LINAC'18, Beijing, China, Sep. 2018, pp. 94-97. doi:10.18429/JACoW-LINAC2018-MOPO034
[n]	M. J. Chin, W. Barry, F. Sannibale, and J. M. Weber, “Advanced Light Source FGPA-based Bunch Cleaning”, in Proc. BIW'08, Lake Tahoe, CA, USA, May 2008, paper TUPTPF074, pp. 287-289. 
[n]	J. M. Weber, M. J. Chin, C. Steier, and E. C. Williams, “ALS FPGA-Based Digital Power Supply Controller for Ramped Power Supplies in the Booster”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper TU6RFP009, pp. 1550-1552. 
[n]	T. H. Luo et al., “Progress on the MICE RF Module at LBNL”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 454-456. doi:10.18429/JACoW-IPAC2016-MOPMW028
[n]	E. C. Williams et al., “New EPICS Display Manager in WPF”, in Proc. ICALEPCS'09, Kobe, Japan, Oct. 2009, paper THP101, pp. 877-879. 
[n]	M. Sapinski et al., “Ionization Profile Monitor Simulations - Status and Future Plans”, in Proc. IBIC'16, Barcelona, Spain, Sep. 2016, pp. 520-523. doi:10.18429/JACoW-IBIC2016-TUPG71
[n]	J. Qiang, S. Paret, K. Ohmi, and T. Pieloni, “Strong-Strong Beam-Beam Simulation of Bunch Length Splitting at the LHC”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 2210-2213. doi:10.18429/JACoW-IPAC2015-TUPTY077
[n]	C. S. Derrez et al., “Initial Performance of the Beam Instrumentation for the ESS IS & LEBT”, in Proc. IPAC'19, Melbourne, Australia, May 2019, pp. 2650-2653. doi:10.18429/JACoW-IPAC2019-WEPGW076
[n]	T. Hofmann et al., “Design of a Laser-based Profile Monitor for LINAC4 Commissioning at 50 MeV and 100 MeV”, in Proc. IBIC'15, Melbourne, Australia, Sep. 2015, pp. 451-455. doi:10.18429/JACoW-IBIC2015-TUPB055
[n]	R. Miyamoto, A. Jansson, S. E. Kopp, and M. J. Syphers, “Tevatron Optics Measurements using an AC Dipole”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPAN102, pp. 3465-3467. 
[n]	Z. C. Chen, Y. B. Leng, Y. Xiong, and W. M. Zhou, “Modeling and Performance Evaluation of DCCTs in SSRF”, in Proc. IBIC'12, Tsukuba, Japan, Oct. 2012, paper MOCB03, pp. 16-19. 
[n]	F. T. Cole, “A Periodic Plasma Waveguide Accelerator”, in Proc. PAC'85, Vancouver, Canada, May 1985, pp. 3486-3489. 
[n]	F. Zocca et al., “Profile and Emittance Measurements at the CERN LINAC-4 3 MeV Test Stand”, in Proc. IBIC'13, Oxford, UK, Sep. 2013, paper WEPF09, pp. 826-829. 
[n]	E. W. Nissen and T. Satogata, “Revised Optics Design for the JLEIC Ion Booster”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3537-3539. doi:10.18429/JACoW-IPAC2018-THPAK126
[n]	M. Otevrel et al., “Diagnostics at PITZ 2.0 Beamline: Status and New Developments”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper MOPPP033, pp. 634-636. 
[n]	V. R. Arsov et al., “Commissioning and Results from the Bunch Arrival-time Monitor Downstream the Bunch Compressor at the SwissFEL Test Injector”, in Proc. FEL'14, Basel, Switzerland, Aug. 2014, paper THP085, pp. 933-936. 
[n]	T. Eriksson et al., “AD Status and Consolidation Plans”, in Proc. COOL'13, Mürren, Switzerland, Jun. 2013, paper MOPM2HA02, pp. 36-39. 
[n]	D. Zhou, Y. H. Chin, K. Ohmi, and G. V. Stupakov, “Calculation of Coherent Wiggler Radiation using Eigenfunction Expansion Method”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPR054, pp. 3048-3050. 
[n]	T. N. Khabiboulline et al., “Update of Beam Optics and SRF Cavities for Project X”, in Proc. IPAC'13, Shanghai, China, May 2013, paper THPWO092, pp. 3975-3977. 
[n]	A. Seryi et al., “Accelerator Design Educational Primer – Conceptualizing and Optimizing the Hybrid LHeC-like Electron-Ion Collider Design”, presented at the IPAC'26, Deauville, France, May 2026, paper WEV1301, unpublished. 
[n]	G. Rumolo and E. M?®tral, “Simulations of Single Bunch Collective Effects Using HEADTAIL”, in Proc. ICAP'06, Chamonix, Switzerland, Oct. 2006, paper MOA2IS02, pp. 59-64. 
[n]	B. Schlitt, M. Hoerr, A. Schnase, G. Schreiber, and W. Vinzenz, “RF System Development for the New 108 MHz Heavy Ion High-Energy Linac at GSI”, in Proc. LINAC'14, Geneva, Switzerland, Aug.-Sep. 2014, paper TUPP058, pp. 556-558. 
[n]	P. Belochitskii, “ELENA Project Status”, in Proc. COOL'13, Mürren, Switzerland, Jun. 2013, paper THPM1HA02, pp. 192-196. 
[n]	A. Fiebig, R. Hohbach, P. Marchand, and J. O. Pearce, “Design Considerations, Construction and Performance of a Sled-Type Radiofrequency Pulse Compressor Using Very High 0 Cylindrical Cavities”, in Proc. PAC'87, Washington D.C., USA, Mar. 1987, pp. 1931-1934. 
[n]	T. H. Luo, A. J. DeMello, A. R. Lambert, D. Li, S. Prestemon, and S. P. Virostek, “Progress on the MICE 201 MHz Cavities at LBNL”, in Proc. IPAC'15, Richmond, VA, USA, May 2015, pp. 3378-3380. doi:10.18429/JACoW-IPAC2015-WEPTY046
[n]	L. Teofili et al., “Design of the New Proton Synchrotron Booster Absorber Scraper (PSBAS) in the Framework of the Large Hadron Collider Injection Upgrade (LIU) Project”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3444-3447. doi:10.18429/JACoW-IPAC2018-THPAK091
[n]	J. R. Cary, “High-Performance Self-Consistent Electromagnetic Modeling of Beams”, in Proc. ICAP'06, Chamonix, Switzerland, Oct. 2006, paper MOAPMP02, pp. 74-74. 
[n]	R. Hohbach, E. Jensen, A. K. Mitra, and R. L. Poirier, “Higher Order Mode Damping of the CERN PS 40 MHz Cavity”, in Proc. EPAC'96, Sitges, Spain, Jun. 1996, paper WEP093L, pp. 2068-2070. 
[n]	S. S. Gilardoni et al., “The PS Upgrade Programme: Recent Advances”, in Proc. IPAC'13, Shanghai, China, May 2013, paper WEPEA042, pp. 2594-2596. 
[n]	N. Biancacci, E. M?®tral, B. Salvant, M. Migliorati, L. Palumbo, and V. G. Vaccaro, “The Mode Matching Method Applied to Beam Coupling Impedance Calculations of Finite Length Devices”, in Proc. IPAC'12, New Orleans, LA, USA, May 2012, paper WEPPR062, pp. 3069-3071. 
[n]	S. R. Lawrie, A. P. Letchford, J. K. Pozimski, and P. Savage, “Simulations to Flatten the Field of the FETS RFQ”, in Proc. IPAC'11, San Sebastian, Spain, Sep. 2011, paper MOPC061, pp. 223-225. 
[n]	J. C. Herrera, C. Lasky, and M. Month, “AGS Low Field Correction Elements”, in Proc. PAC'67, Washington D.C., USA, Mar. 1967, pp. 425-431. 
[n]	R. Schuhmann, “EM Field Simulation Based on Volume Discretization: Finite Integration and Related Approaches”, in Proc. ICAP'06, Chamonix, Switzerland, Oct. 2006, paper MOA1MP01, pp. 41-41. 
[n]	K. Kubo, “Beam Development in ATF Damping Ring”, in Proc. EPAC'98, Stockholm, Sweden, Jun. 1998, paper MOP03D, pp. 469-471. 
[n]	L. Fernandez, R. Andersson, H. Hagenrud, T. Korhonen, R. Mudingay, and B. Zupanc, “How to Build and Maintain a Development Environment for the Development of Controls Software Applications: An Example of Infrastructure as Code" within the Physics Accelerator Community."”, in Proc. IPAC'16, Busan, Korea, May 2016, pp. 2781-2783. doi:10.18429/JACoW-IPAC2016-WEPOR050
[n]	G. V. Stupakov, “Control and Application of Beam Microbunching in High Brightness Linac-driven Free Electron Lasers”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 2789-2793. doi:10.18429/JACoW-IPAC2014-THYA01
[n]	A. Lal, K. Wharton, D. Gordon, M. J. Everett, C. E. Clayton, and C. Joshi, “Measurements of the Beatwave Dynamics in Time and Space”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RAB04, pp. 767-769. 
[n]	H. J. Qian et al., “Design of a 1.3 GHz Two-cell Buncher for APEX”, in Proc. IPAC'14, Dresden, Germany, Jun. 2014, pp. 3924-3926. doi:10.18429/JACoW-IPAC2014-THPRI066
[n]	R. J. Ducar, “A CAMAC Serial Crate Controller for the Tevatron Accelerator”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2303-2305. 
[n]	S. Zhang et al., “Reconstruction of Beam Parameters from Betatron Radiation Using Maximum Likelihood Estimation and Machine Learning”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 407-409. doi:10.18429/JACoW-IPAC2022-MOPOPT063
[n]	D. Alves, “Estimation of Longitudinal Profiles of Ion Bunches in the LHC Using Schottky-Based Diagnostics”, in Proc. IBIC'19, Malmö, Sweden, Sep. 2019, pp. 45-49. doi:10.18429/JACoW-IBIC2019-MOCO03
[n]	J. D. Bailey and D. K. Olsen, “A Proposed Superconducting Booster Linac for the HRIBF”, in Proc. PAC'97, Vancouver, Canada, May 1997, paper 5W028, pp. 1177-1179. 
[n]	A. G. Valentinov, V. Korchuganov, Y. V. Krylov, and Y. L. Yupinov, “Horizontal Emittance Regulation at SIBERIA-2”, in Proc. RuPAC'14, Obninsk, Russia, Oct. 2014, paper THPSC13, pp. 347-349. 
[n]	M. H. Oruganti, B. Naranjo, J. B. Rosenzweig, and M. Yadav, “Comparing Methods of Recovering Gamma Energy Distributions from PEDRO Spectrometer Responses”, in Proc. IPAC'22, Bangkok, Thailand, Jun. 2022, pp. 1784-1786. doi:10.18429/JACoW-IPAC2022-WEPOST040
[n]	A. Neumann et al., “The BERLinPro SRF Photoinjector System - From First RF Commissioning to First Beam”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 1660-1663. doi:10.18429/JACoW-IPAC2018-TUPML053
[n]	R. J. Ducar, “Tevatron Serial Data Repeater System”, in Proc. PAC'81, Washington D.C., USA, Mar. 1981, pp. 2301-2303. 

For LaTeX

Use Complete Form

For BibTeX

References

Back to search