Warning
Some papers titles are all uppercase, you must correct this before using this reference.
The page numbers for some of these references could not be added automatically. You must provide the page numbers from the original proceedings which is located at JACoW.org, and substitute ‘pp. XX-XX’ with the correct page numbers.
Favourites
For Word
[n] C. Kuo et al., “Performance of the SRRC Storage Ring and Wiggler Commissioning”, in Proc. PAC'95, Dallas, TX, USA, May 1995, paper RAA24, pp. 582-584.
[n] Z. Zheng, J. T. Popielarski, K. Saito, and T. Xu, “Cost Reduction for FRIB Magnetic Shielding”, in Proc. LINAC'16, East Lansing, MI, USA, Sep. 2016, pp. 818-820. doi:10.18429/JACoW-LINAC2016-THPRC023
[n] C. Zhang et al., “A 1-2 GHz stochastic cooling system for antiprotons and rare isotopes”, in Proc. IPAC'23, Venice, Italy, May 2023, pp. 1740-1743. doi:10.18429/JACoW-IPAC2023-TUPA184
[n] H. Fadil et al., “COLLECTION AND COOLING SCHEME OF LASER PRODUCED ION BEAM”, in Proc. APAC'01, Beijing, China, Sep. 2001, paper FRAM03, pp. XX-XX.
[n] F. M. Nortier, J. W. Lenz, J. W. Lenz, P. A. Smith P, and A. Smith Concepts, “Large-Scale Isotope Production With An Intense 100 Mev Proton Beam: Recent Target Performance Experience”, in Proc. Cyclotrons'07, Giardini-Naxos, Italy, Oct. 2007, pp. 257-259.
[n] P. Jain, H. Fukuma, K. Kanazawa, and Y. Suetsugu, “Analysis of the Measurement of Electron Cloud Density under Various Beam-optics Elements in KEKB LER”, in Proc. IPAC'10, Kyoto, Japan, May 2010, paper TUPEC050, pp. 1835-1837.
[n] E. Vogel, “FLASH progress report”, in Proc. SRF'07, Beijing, China, Oct. 2007, paper MO204, pp. XX-XX.
[n] K. Bongardt et al., “The COSY Lattice”, in Proc. EPAC'90, Nice, France, Jun. 1990, pp. 1491-1494.
[n] G. Ellwood and R. J. S. Greenhalgh, “Beam Impact Studies on ILC Collimators”, in Proc. PAC'07, Albuquerque, NM, USA, Jun. 2007, paper THPMN068, pp. 2859-2861.
[n] S. Albrand, J. L. Belmont, M. Fruneau, and A. Khallouf, “New Design for the Old Cyclotron of SARA”, in Proc. Cyclotrons'86, Tokyo, Japan, Oct. 1986, paper F-02, pp. 191-194.
[n] I. A. Frejdovich et al., “Multy-Beam Klystrons with Reverse Permanent Magnet Focusing System as the Universal RF Power Sources for the Compact Electron Accelerators.”, in Proc. RuPAC'06, Novosibirsk, Russia, Sep. 2006, paper TUHO08, pp. XX-XX.
[n] G. Arduini et al., “The LHC Proton Beam in the CERN SPS: an Update”, in Proc. PAC'03, Portland, OR, USA, May 2003, paper TPPB050, pp. 1718-1720.
[n] P. J. Chou et al., “Suppression of Transverse Beam Instabilities by Stripline Kickers at TPS”, in Proc. IPAC'18, Vancouver, Canada, Apr.-May 2018, pp. 3346-3349. doi:10.18429/JACoW-IPAC2018-THPAK055
[n] A. Valishev and V. D. Shiltsev, “Electron Lens for Beam-Beam Compensation at LHC”, in Proc. PAC'09, Vancouver, Canada, May 2009, paper WE6PFP034, pp. 2567-2569.
[n] H. Hähnel, A. Ates, B. Dedic, C. Wagner, J. Kaiser, and U. Ratzinger, “RF conditioning of an IH-DTL cavity made using additive manufacturing”, in Proc. IPAC'24, Nashville, TN, USA, May 2024, pp. 3501-3504. doi:10.18429/JACoW-IPAC2024-THPR10
For LaTeX
Use Complete Form
For BibTeX
References
- C. Kuo et al., “Performance of the SRRC Storage Ring and Wiggler Commissioning”, in Proc. 16th Particle Accelerator Conf. (PAC'95), Dallas, TX, USA, May 1995, paper RAA24, pp. 582-584.
- Z. Zheng, J. T. Popielarski, K. Saito, and T. Xu, “Cost Reduction for FRIB Magnetic Shielding”, in Proc. 28th Linear Accelerator Conf. (LINAC'16), East Lansing, MI, USA, Sep. 2016, pp. 818-820.
- C. Zhang et al., “A 1-2 GHz stochastic cooling system for antiprotons and rare isotopes”, in Proc. 14th Int. Particle Accelerator Conf. (IPAC'23), Venice, Italy, May 2023, paper TUPA184, pp. 1740-1743.
- H. Fadil et al., “COLLECTION AND COOLING SCHEME OF LASER PRODUCED ION BEAM”, in Proc. 2nd Asian Particle Accelerator Conf. (APAC'01), Beijing, China, Sep. 2001, paper FRAM03, pp. XX-XX.
- F. M. Nortier, J. W. Lenz, J. W. Lenz, P. A. Smith P, and A. Smith Concepts, “Large-Scale Isotope Production With An Intense 100 Mev Proton Beam: Recent Target Performance Experience”, in Proc. 18th Int. Conf. on Cyclotrons and Their Applications (Cyclotrons'07), Giardini-Naxos, Italy, Oct. 2007, pp. 257-259.
- P. Jain, H. Fukuma, K. Kanazawa, and Y. Suetsugu, “Analysis of the Measurement of Electron Cloud Density under Various Beam-optics Elements in KEKB LER”, in Proc. 1st Int. Particle Accelerator Conf. (IPAC'10), Kyoto, Japan, May 2010, paper TUPEC050, pp. 1835-1837.
- E. Vogel, “FLASH progress report”, in Proc. 13th Int. Conf. RF Superconductivity (SRF'07), Beijing, China, Oct. 2007, paper MO204, pp. XX-XX.
- K. Bongardt et al., “The COSY Lattice”, in Proc. 2nd European Particle Accelerator Conf. (EPAC'90), Nice, France, Jun. 1990, pp. 1491-1494.
- G. Ellwood and R. J. S. Greenhalgh, “Beam Impact Studies on ILC Collimators”, in Proc. 22nd Particle Accelerator Conf. (PAC'07), Albuquerque, NM, USA, Jun. 2007, paper THPMN068, pp. 2859-2861.
- S. Albrand, J. L. Belmont, M. Fruneau, and A. Khallouf, “New Design for the Old Cyclotron of SARA”, in Proc. 11th Int. Cyclotron Conf. and Their Applications (Cyclotrons'86), Tokyo, Japan, Oct. 1986, paper F-02, pp. 191-194.
- I. A. Frejdovich et al., “Multy-Beam Klystrons with Reverse Permanent Magnet Focusing System as the Universal RF Power Sources for the Compact Electron Accelerators.”, in Proc. 20th Russian Particle Accelerator Conf. on Charged Particle Accelerators (RuPAC'06), Novosibirsk, Russia, Sep. 2006, paper TUHO08, pp. XX-XX.
- G. Arduini et al., “The LHC Proton Beam in the CERN SPS: an Update”, in Proc. 20th Particle Accelerator Conf. (PAC'03), Portland, OR, USA, May 2003, paper TPPB050, pp. 1718-1720.
- P. J. Chou et al., “Suppression of Transverse Beam Instabilities by Stripline Kickers at TPS”, in Proc. 9th Int. Particle Accelerator Conf. (IPAC'18), Vancouver, Canada, Apr.-May 2018, pp. 3346-3349.
- A. Valishev and V. D. Shiltsev, “Electron Lens for Beam-Beam Compensation at LHC”, in Proc. 23rd Particle Accelerator Conf. (PAC'09), Vancouver, Canada, May 2009, paper WE6PFP034, pp. 2567-2569.
- H. Hähnel, A. Ates, B. Dedic, C. Wagner, J. Kaiser, and U. Ratzinger, “RF conditioning of an IH-DTL cavity made using additive manufacturing”, in Proc. 15th Int. Particle Accelerator Conf. (IPAC'24), Nashville, TN, USA, May 2024, paper THPR10, pp. 3501-3504.
Back to search